Abstract:The present work systematically investigates the effect of cavitator mounting strut and cavitator shape on the ventilation demand to form and sustain a ventilated supercavity under different flow conditions. Three cavitators of different shapes (i.e. 2D cavitators including triangle and disk shape, and 3D cone-shaped cavitator) with the same frontal area are employed for the experiments. The cavitator is connected to a ventilation pipe extended upstream from a mounting strut, referred to as forward-facing model (FFM). The minimal ventilation coefficients to generate (<math>CQf</math>) and to collapse (<math>CQc</math>) a supercavity are measured over a wide range of Froude number (<math>Fr</math>) for each cavitator. Images of overall cavity shapes and topology near closure region as well as the cavity pressure under different experimental conditions are captured simultaneously. The results are compared across different cavitator shapes and the disk cavitator situated on the downstream side of the mount strut, referred to as backward-facing model (BFM). Similar <math>CQf-Fr</math> curves were observed in BFM and FFM-configured disk cavitators. The cone-shaped cavitator requires the least amount of ventilation to generate a supercavity among all different shapes across the range of <math>Fr</math> in our experiments. The <math>CQc</math>of disk FFM is lower than that of its BFM counterpart at small <math>Fr</math> and exceeds the BFM <math>CQc</math>with further increase of <math>Fr</math>. The cone cavitator has the smallest <math>CQc</math> among all the cavitators across the range of <math>Fr</math> in our experiments. To elucidate the trends of <math>CQc</math> upon changing <math>Fr</math> and cavitator shape, the geometry of supercavity under <math>CQc</math> including its overall shape, the cavity maximum diameter (<math>Dmax</math>) and half length (<math>L1/2</math>) are also investigated. Both <math>Dmax</math> and <math>L1/2</math> show an increasing then plateauing trend upon increasing <math>Fr</math> across different FFM cavitators despite the smaller values for the 3D cone cavitator. Subsequently, such cavity geometric information and cavity pressure measurements in conjunction with high speed imaging of re-entrant jet are employed to estimate the re-entrant jet momentum under different <math>Fr</math> for disk and cone cavitators. The estimated re-entrant jet momentum shows reasonable match with the ventilation air momentum under <math>CQc</math> in lower <math>Fr</math> for both cavitator cases, with the disk cavitator case yielding significantly stronger re-entrant jet, providing support to the re-entrant jet mechanism governing on the cavity collapse. Our study sheds some light on the cavitator design and ventilation strategy for a supercavitating vehicle in practice.

Numerical study of acoustic effects induced by incoming acoustic perturbation on supercavity

Experimental and numerical analysis of the physical characteristics of natural and ventilated supercavitating flows

Numerical Simulations of Bubble Formation and Acoustic Characteristics from a Submerged Orifice: the Effects of Nozzle Wall Configurations

Numerical Investigations of Pressure Distribution Inside A Ventilated Supercavity

Numerical analysis of cavitation-induced noise characteristics in hydrofoils using finite element acoustic method and spherical cavity radiation theory

Numerical Simulations and Experimental Validation on Passive Acoustic Emissions During Bubble Formation

Experimental Investigation of Tip Vortex Cavitation Noise under Static and Dynamic States

Acoustic analysis on jet-bubble formation based on 3 D numerical simulations

Experimental and numerical study on flow dynamics and universal characteristics of ventilated supercavities behind different cavitators

Numerical investigation of a deep cavity with an overhanging lip considering aeroacoustic feedback mechanism

Experimental Investigation of Ventilated Partial Cavitation

Modeling of Hydroacoustic Noise from Marine Propellers with Tip Vortex Cavitation

Numerical Investigation of Supersonic Turbulent Flow Over Open Cavities

Numerical Analysis of Supersonic Flows over an Aft-Ramped Open-Mode Cavity

Numerical study of the behaviors of ventilated supercavities in a periodic gust flow

Influence of Periodic Disturbance Incoming Flow on the Supercavitation Phenomenon

Insights into ventilation hysteresis shift due to flow unsteadiness in ventilated supercavitation

Effect of the Gust Wave on the Dynamic Behavior of Cavity Closure and Pressure: A Numerical Study

Numerical Simulation of Ventilated Cavitation Evolution with an Insight on How Ventilation Influences Pressure Fluctuation and Cavitation Noise

Effect of mounting strut and cavitator shape on the ventilation demand for ventilated supercavitation

Investigation into the behaviors of ventilated supercavities in unsteady flow