Abstract:Due to large uncertainties embedded in their geotechnical parameters, dynamic numerical models of landslide run-out distance can only be reliably applied to conduct post-failure back analyses, rather than accurate physical-based forward predictions. Therefore, it is important to quantify these uncertainties, and their effects, to improve the reliability of predictions. This paper proposes a run-out distance prediction methodology within a probabilistic framework to assess the exceedance probability of run-out distance for an individual landslide using a depth-integrated continuum method (Massflow) and a polynomial response surface method coupled with the first-order reliability method (RSM-FORM). The input parameters (i.e., friction angle and pore pressure ratio) are considered as random variables with reasonable probability density functions. The limit state function (LSF) is established based on a given threshold value of the run-out distance. The RSM is then adopted to establish a mathematical function that approximates the real LSF; and then, based on the fitted response surface, the FORM is employed to calculate the probability of the run-out distance exceeding the given threshold value. The 2015 Shenzhen landslide is considered as an example to illustrate the proposed methodology. The results show that our proposed methodology can successfully assess the exceedance probability of the run-out distance at different locations with acceptable computational errors. In addition, the computational efficiency is significantly improved compared to conventional Monte Carlo simulations. Moreover, according to the run-out distance-exceedance probability curve, the area potentially affected by the Shenzhen landslide can be classified into five categories (i.e., extremely high, high, medium, low, and extremely low) based on the different threshold values of exceedance probability (i.e., 50%, 10%, 1%, and 0.1%). The observed deposition area of the Shenzhen landslide lies within the extremely high and high hazard zones, demonstrating the feasibility of conducting landslide hazard zoning using the exceedance probability of the run-out distance. This study thus presents a practical procedure for enhancing the probabilistic run-out distance prediction of individual landslides and provides new ideas for conducting hazard zoning.

A Numerical Study on Controlling Parameters for Runout Distance of Landslides

Efficient Reliability Analysis of Slopes Integrating the Random Field Method and a Gaussian Process Regression‐based Surrogate Model

Study on the Crack Mechanism and Back Analysis of Mechanics Parameters of the Soil Slope in the New Area of MaGang

Runout Analysis of Landslides Using Material Point Method

A three-dimensional large-deformation random finite-element study of landslide runout considering spatially varying soil

Three-dimensional Material Point Method Modeling of Runout Behavior of the Hongshiyan Landslide

MATERIAL POINT METHOD FOR RUN-OUT PROCESS SIMULATION OF SOIL LANDSLIDES AND APPLICATION

Stability evaluation of gentle slopes in spatially variable soils using discretized limit analysis method: a probabilistic study

Parametric analysis for the large deformation characteristics of unstable slopes with linearly increasing soil strength by the random material point method

Multivariate Copula-based Framework for Stochastic Analysis of Landslide Runout Distance

Effects of the Spatial Variability of Permeability on Rainfall-Induced Landslides

MPM-based mechanism and runout analysis of a compound reactivated landslide

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

A case study on soil slope landslide failure and parameter analysis of influencing factors for safety factor based on strength reduction method and orthogonal experimental design

Peridynamics-based large-deformation simulations for near-fault landslides considering soil uncertainty

Run-out distance exceedance probability evaluation and hazard zoning of an individual landslide

Run-out characteristic simulation of a surcharge-induced soil landslide using the material point method

Run-out of the 2015 Shenzhen Landslide Using the Material Point Method with the Softening Model

Postfailure Analysis of Slopes by Random Generalized Interpolation Material Point Method

Stability of slopes in partially saturated soils: Incorporating the combined effects of seismic forces and pore water pressure

3D probabilistic landslide run-out hazard evaluation for quantitative risk assessment purposes