A highly efficient photoelectrochemical sensor for detection of chlorpyrifos based on 2D/2D β-Bi2O3/g-C3N4 heterojunctions

Haixia Wang,Dong Liang,Yan Xu,Xiang Liang,Xiaoqing Qiu,Zhang Lin

DOI: https://doi.org/10.1039/d0en01243b

2021-01-01

Abstract:Construction of 2D/2D β-Bi2O3/g-C3N4 heterojunctions has been demonstrated to be beneficial to achieve high PEC performance for chlorpyrifos detection.

What problem does this paper attempt to address?

Synergistic Effect of Hybrid CdSe Nanobelt/PbI2 Flake Heterojunction Toward Drastic Performance Flexible Photodetectors.

Muhammad Zubair Nawaz,Liu Xu,Xin Zhou,Muhammad Javed,Jiale Wang,Binhe Wu,Chunrui Wang

DOI: https://doi.org/10.1021/acsami.2c22219

IF: 9.5

2023-01-01

ACS Applied Materials & Interfaces

Abstract:Despite numerous studies on broadband photodetectors, the problematic query that remains unaddressed is the limited photoresponsivity while broadening the spectral regime. Here, for the first time, a rational design of a hybrid 1D CdSe nanobelt/2D PbI2 flake heterojunction device is constructed, which substantially boosts the photocurrent while significantly attenuating the dark current, resulting in improved photodetector figures-of-merit. Thanks to the excellent quality of the nanobelt/flake and built-in electric field at the CdSe/PbI2 interface heterojunction, photogenerated carriers are promptly segregated and more photoexcitons are accumulated by the respective electrodes, enabling a high responsivity of ∼106 A/W, making this one of the highest values among similar reported hybrid heterojunction photodetectors, together with a large linear dynamic range, superior sensitivity, excellent detectivity and external quantum efficiency, an ultrafast response, and a broadband spectral response range. The similar 1D/2D hybrid heterojunction device architecture assembled on the flexible polyimide tape substrate exhibits excellent folding endurance and mechanical, flexural, and long-term environmental stability. The present device architecture and robust operational stability in an ambient environment reveals that the combination of the present 1D/2D hybrid heterojunction has incredible potential for future flexible photoelectronic devices.
Photoelectrochemical sensor based on Bi2S3 @g-C3N4 heterojunction for the detection of chlorpyrifos

Qin Lei,Jiaxin Li,Junjie Lei,Bo Hong,Xiaoling Li,He Li,Yiwen Wan

DOI: https://doi.org/10.1016/j.surfin.2023.102913

IF: 6.2

2023-07-01

Surfaces and Interfaces

Abstract:In this study, a simple wet chemical method was used to prepare p-n heterojunction photoelectric composites (Bi2S3@g-C3N4). The p-n junctions were formed to facilitate charge transfer as well as strongly suppress electron-hole pair recombination, thus enhancing the photoelectrochemical (PEC) characteristics. Particularly, according to the transient surface photocurrent response, the photocurrent intensity of the prepared composites was 2.98 times higher relative to the pristine g-C3N4 material. The photocurrent signal revealed the prepared novel PEC sensor composed of Bi2S3@g-C3N4 composite material, which can be used for sensitively and selectively detecting chlorpyrifos. This method presented a linear change from 50 ng/mL to 0.1 mg/mL of chlorpyrifos under the optimal conditions. The linear regression equation was I(μA)=0.8546-0.1558lgC(mg/mL) (R2=0.9758) and the detection limit was 0.03 ng/mL (S/N=3). In addition, the novel sensing platform with high selectivity could assist in rapidly and effectively detecting chlorpyrifos in environmental analysis.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Photonuclear and atomic cross sections of 27Al between 3 and 38 MeV.

Sherman,Davidson,Ahrens

DOI: https://doi.org/10.1103/PHYSREVC.36.911

1987-09-01

Abstract:The total cross section for photon absorption of Al was measured for energies between 3 and 38 MeV with a el-ray spectrometer consisting of a liquid deuterium target viewed by a photoneutron time-of-flight detector. Corrections to the observed total cross section for background electromagnetic processes in the absorber were computed by a Monte Carlo method. Between 5 and 8 MeV where the photonuclear cross section sigma/sub N/ is negligible and the uncertainty in the measurements is small, values of the atomic cross section sigma/sub Z/ calculated by others systematically exceed the measured values by 0.7%. In this energy interval sigma/sub Z/ is mainly due to incoherent photon scattering by atomic electrons. Nonrelativistic atomic form factors and estimated radiative corrections used in calculating the tabulated incoherent scattering cross sections introduced enough uncertainty to justify decreasing sigma/sub incoh/ by 0.87% to bring sigma/sub Z/ into agreement with experiment. Correcting this discrepancy causes the integral between 10 and 38 MeV of sigma/sub N/, which has a maximum value of about 5% of sigma/sub Z/, to increase by 18% to 500 MeV mb. We conclude that the giant dipole resonance of /sup 27/Al has a strength of 1.24 classical sum rule units.
A Highly Sensitive and Visible-Light-driven Photoelectrochemical Sensor for Chlorpyrifos Detection Using Hollow Co9S8@CdS Heterostructures

Lixiang Zhang,Luping Feng,Jiatian Jiang,Pan Li,Xi Chen,Sheng Zhang,Yuan Gao,Ruoxi Hong,Guofu Chen,Guojiang Mao,Hua Wang

DOI: https://doi.org/10.1016/j.snb.2021.130719

IF: 9.221

2021-01-01

Sensors and Actuators B Chemical

Abstract:A highly sensitive and visible-light-driven photoelectrochemical (PEC) sensor has been constructed for the quantitative assay of organophosphorus pesticides like chlorpyrifos (Chlo) using hollow Co9S8@CdS heterostructures. The Co9S8@CdS heterostructures were created by growing CdS onto Co9S8 surface via one-step oil bath route, of which Co9S8 was fabricated with hollow tubular structures through the Co(CO3)(0.35)Cl-0.2(OH)(1.1)-templated solvothermal method. It was discovered that the so-obtained Co9S8@CdS with direct Z-scheme heterojunctions could exhibit larger photocurrents than the Co9S8 or CdS because of the greatly enhanced separation efficiency of photo-generated carriers. What's more, the photocurrent signal of Co9S8@CdS-based PEC sensor could be selectively inhibited with the addition of Chlo through the specific chelation between the N and S atoms of Chlo with C = N and P = S groups and Co sites of Co9S8@CdS so as to suppress the carriers transferring. The developed PEC sensor could exhibit a linear response for Chlo ranging from 0.050 to 1000 ppb, with the detection limit value down to 0.015 ppb, which was far below than those of currently reported PEC sensors. Besides, the proposed routes may provide guidelines for designing various direct Z-scheme heterojunction-based PEC analysis platforms for determining environmental pollutants like Chlo.
Structural properties of phase-change InSbTe thin films grown at a low temperature by metalorganic chemical vapor deposition.

Jun-Ku Ahn,Kyoung-Woo Park,Sung-Gi Hur,Chung-Soo Kim,Jeongyong Lee,Soon-Gil Yoon

DOI: https://doi.org/10.1166/JNN.2011.3098

Journal of Nanoscience and Nanotechnology

Abstract:The feasibility of new InSbTe (IST) chalcogenide materials at the deposition temperatures of 225 and 250 degrees C using metalorganic chemical vapor deposition (MOCVD) for phase-change random access memory (PRAM) applications was investigated. Samples grown at 225 degrees C consisted of the main InTe phase, including a small amount of Sb. On the other hand, samples grown at 250 degrees C included the crystalline phases of InSb and InSbTe. MOCVD-IST materials are powerful candidates for highly-integrated PRAM applications.
Steady state CFD modeling of an IT pod and its cooling system

S. Sathyanarayan,B. Gebrehiwot,V. Sreeram,Digvijay Sawant,D. Agonafer,N. Kannan,James Hoverson,M. Kaler

DOI: https://doi.org/10.1109/SEMI-THERM.2015.7100159

2015-03-15

Abstract:Modular data centers are increasingly being developed instead of using large data centers to save huge amount of capital investment. High energy efficiency is a priority and measures have been taken to increase it. Cooling techniques such as air-side economization and evaporative cooling are proving to be some of those very effective measures. An Information Technology (IT) pod cooled by an indirect/ direct evaporative cooling unit is the prime focus of this paper. CFD modeling helps to resolve cooling problems and predict inefficiencies in modular data centers. For existing data centers, CFD modeling is used to identify the cooling issues and explore various cooling improvements without risking the operation of the data center. In this paper, CFD analysis is performed to study the airflow pattern and temperature distribution inside the modular data center and the cooling unit. Study reveals significant increase in supply temperature due to solar loading on the supply duct.
Bifunctional Strategy toward Constructing Perovskite/Upconversion Lab-on-Paper Photoelectrochemical Device for Sensitive Detection of Malathion

Guofu Wang,Lin Li,Huandong Zheng,Qiuyi Li,Jiali Huang,Lina Zhang,Hongmei Yang,Kang Cui,Jinghua Yu

DOI: https://doi.org/10.1021/acsnano.3c01692

IF: 17.1

2023-07-12

ACS Nano

Abstract:Bifunctional nanocrystals which combine two kinds of materials into single nanoparticles hold great promise in photoelectrochemical (PEC) analysis, particularly for nanocrystals based on perovskite quantum dots (QDs) which generally exhibit excellent photoelectric activity yet poor stability and upconversion nanoparticles (UCNP) that normally suffer from negligible photoelectric activity. Therefore, to achieve good performance of the PEC bioassay platform, it is valuable to combine perovskite...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
One-Step Electropolymerization of Polythiophene Derivative Film for Photoelectrochemical Detection of Chlorpyrifos

Xiaoyun Xu,hong zhou,Jihui Zhang,Yanping Li,Yunjun Yang,Yishan Fang,Zhengzong Wu,Bo Cui,Qiong Hu

DOI: https://doi.org/10.1149/1945-7111/ac8fbe

IF: 3.9

2022-09-07

Journal of The Electrochemical Society

Abstract:The inappropriate and excessive use of chlorpyrifos has caused major damage to food safety and human health. Developing a simple yet sensitive detection method for chlorpyrifos residues is urgently needed. Photoelectrochemical (PEC) sensor with high photoelectric conversion efficiency is of great significance for the detection of chlorpyrifos residues in food. In this work, a novel PEC sensor based on polythiophene derivative film (PS2TTz) for the detection of chlorpyrifos is constructed via simple one-step electropolymerization within only 3.5 min. Scanning electron microscopy, raman spectroscopy, X-ray photoelectron spectroscopy, and other characterizations verified the effective decoration of PS2TTz film on the GCE, and the possible reaction mechanism between PS2TTz and chlorpyrifos was discussed. The PEC signal could be greatly decreased by PS2TTz film with chlorpyrifos due to the blocked transfer of electrons, leading to high sensitivity and good selectivity. On the basis of the proposed photoelectrochemical mechanism, the PEC sensor exhibited significant detection performance toward chlorpyrifos in the range of 1 to 218.92 μg/L with a LOD of 0.36 μg/L (S/N = 3). Impressively, the constructed PEC sensor was successfully applied in green vegetables, which expanded the scope for the detection of chlorpyrifos in practical application.

electrochemistry,materials science, coatings & films
Rationally constructed ZnCdS-HDCs@In2S3-HNRs double-hollow heterojunction with promoted light capture capability for photoelectrochemical biosensing

Mingxuan Peng,Shaoyu Lin,Zhenbin Lin,Delun Zheng,Yibing Song,Fushen Lu,Yaowen Chen,Wenhua Gao

DOI: https://doi.org/10.1016/j.bios.2021.113957

IF: 12.545

2022-04-01

Biosensors and Bioelectronics

Abstract:The construction of novel heterojunction is regarded as an operative scheme to promote the transport of photogenerated carriers and reduce electron-hole pair recombination to enhance the photoelectrochemical (PEC) performances. Herein, ZnCdS hollow dodecahedral nanocages (ZnCdS-HDCs) and In2S3 hollow nanorods (In2S3-HNRs), which were derived from two different of metal-organic frameworks (MOFs) by solvothermal sulfidation method and were constructed an original double-hollow heterostructure ZnCdS-HDCs@In2S3-HNRs. The intrinsic mechanism of In2S3-HNRs benefiting from unique morphology to boost the photochemical properties under visible light irradiation was illustrated. Meanwhile, the mechanism of the novel type II heterojunction with staggered matching levels was revealed, which could effectively restrict electron-hole pair reassociation separation, and accelerated charge separation and transfer. Therefore, based on the excellent PEC performance of ZnCdS- HDCs@In2S3-HNRs double-hollow heterostructure, a signal-off PEC biosensor platform without labeled was constructed for the detection of CA15-3, which manifested acceptable specificity, reproducibility and stability. Additionally, the expected PEC biosensors showed a linear response range from 1.0 × 10-5 to 10 U·mL-1 in addition to an ultralow detection limit of 3.78 × 10-6 U·mL-1. This study innovatively constructed and prepared a new double-hollow heterojunction material with superior PEC nature for the application of PEC biosensing, which exhibits a broad application prospect.

biotechnology & applied microbiology,biophysics,chemistry, analytical,electrochemistry,nanoscience & nanotechnology
[Supracristal interventricular defects associated with pulmonary infundibular stenosis: a new syndrome].

R. Donatelli,C. Santoli,A. Palminiello

Abstract:
Semiconducting Organic-Inorganic Nanodots Heterojunctions: Platforms for General Photoelectrochemical Bioanalysis Application

Qian Wang,Yi-Fan Ruan,Wei-Wei Zhao,Peng Lin,Jing-Juan Xu,Hong-Yuan Chen

DOI: https://doi.org/10.1021/acs.analchem.7b03852

IF: 7.4

2018-01-01

Analytical Chemistry

Abstract:In this study, semiconducting organic polymer dots (Pdots) and inorganic quantum dots (Qdots) were first utilized to construct the organic-inorganic nanodots heterojunction for the photoelectrochemical (PEC) bioanalysis application. Specifically, n-type CdS Qdots, p-type CdTe Qdots, and tetraphenylporphyrin (TPP)-doped poly[(9,9-dioctylfluoreny1-2,7-diyl)-co(1,4-benzo-{2,1',3}-thiadazole)] (PFBT) Pdots were fabricated, and their energy levels, that is, their valence band (VB)/conduction band (CB) or lowest unoccupied molecular orbital (LUMO)/highest occupied molecular orbital (HOMO) values, were also determined. Then, these nanodots were integrated to construct four types of p-n and p-p organic-inorganic nanodots heterojunctions, that is, CdS Qdots/TPP-doped PFBT Pdots, TPP-doped PFBT Pdots/CdS Qdots, CdTe Qdots/TPP-doped PFBT Pdots, and TPP-doped PFBT Pdots/CdTe Qdots, on the transparent glass electrode. Upon light irradiation, four heterojunctions exhibited different PEC behaviors with some having prominent photocurrent enhancement. With the model molecule L-cysteine (L-cys) as target, the proposed PEC sensor exhibited good performances. In brief, this work presents the first semiconducting organic-inorganic nanodots heterojunction for PEC bioanalysis application, which could be easily used as a general platform for future PEC bioanalysis building. Besides, it is expected to inspire more interest in the design, development, and implementation of various organic-inorganic heterojunctions for advanced PEC bioanalysis in the future.
Highly stable and sensitive photoelectrochemical photodetectors based on a ZnO nanorod/monolayer MoS 2 nanosheets heterostructure

Jingyao Ma,Yanqing Ge,Pengpeng Dai,Chunhui Lu,Xinlong Xu

DOI: https://doi.org/10.1016/j.jallcom.2023.173315

IF: 6.2

2024-01-02

Journal of Alloys and Compounds

Abstract:Construction of type-II heterostructures between metal oxide nanorod arrays and narrow band gap semiconductors is a proven strategy for enlarging the surface area, shortening the diffusion length, broadening the light harvesting ability, and facilitating carrier transport, which are of great significance for photoelectrochemical (PEC) photodetectors. A ZnO/MoS 2 heterostructure was designed and fabricated via a facile hydrothermal process accompanied by chemical vapor deposition method. The ZnO nanorod/monolayer MoS 2 nanosheet heterostructure was revealed with scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. These heterojunction-based PEC photodetectors showed higher photoresponsivity (4.2 mA/W) than those of ZnO (∼0.9 mA/W) and MoS 2 photodetectors (∼0.007 mA/W) due to its fast interfacial charge transfer and efficient light capture. Furthermore, the ZnO/MoS 2 heterostructural photodetectors exhibited a maximum photoresponsivity of approximately 5.0 mA/W at 420 nm and long-term stability even over 6 h. Our work paves the way to rationally designed heterostructures for high-performance and stable photodetectors and beyond.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
A Wavelength-Resolved Ratiometric Photoelectrochemical Technique: Design and Sensing Applications

Qing Hao,Xiaonan Shan,Jianping Lei,Yang Zang,Qianhui Yang,Huangxian Ju

DOI: https://doi.org/10.1039/c5sc03336e

IF: 8.4

2015-01-01

Chemical Science

Abstract:In this work, a wavelength-resolved ratiometric photoelectrochemical (WR-PEC) technique was investigated and employed to construct a new type of PEC sensor with good sensitivity and anti-interference ability. The WR-PEC hybrid photoelectrodes were stepwise assembled using semiconductor quantum dots (QDs) and photoactive dyes. Under continuous irradiation, the photocurrent-wavelength (I-λ) curves reveal the dependence of the photocurrent on the wavelength. By monitoring the ratios of the two different PEC peak values, a wavelength-resolved ratiometric strategy was realized. Using CdS QDs and methylene blue (MB) as photoactive models, a dual-anodic WR-PEC sensor was established for sensitive detection of Cu2+. This ratiometric strategy was identified to be based on the quenching effect of Cu2+ towards CdS QDs and enhancement of the MB photocurrent through catalytic oxidation of leuco-MB. Under continuous illumination from 400 nm to 800 nm at a 0.1 V bias potential, a WR-PEC sensor for Cu2+ was developed with a wide linear range and a detection limit of 0.37 nM. This WR-PEC had a greatly improved anti-interference ability in a complex environment, and showed acceptable stability. Moreover, using the CdS/magnesium phthalocyanine (MgPc) and CdTe/MgPc as photoelectrodes, anodic-cathodic and dual-cathodic WR-PEC sensors were established, respectively. The WR-PEC technique could serve as a novel concept for designing ratiometric or multi-channel PEC sensors.
A longitudinal study of abnormalities on MRI and disability from multiple sclerosis.

P. Brex,O. Ciccarelli,J. O'riordan,M. Sailer,A. Thompson,David H. Miller

DOI: https://doi.org/10.1056/NEJMOA011341

IF: 158.5

2002-01-17

New England Journal of Medicine

Abstract:BACKGROUND In patients with isolated syndromes that are clinically suggestive of multiple sclerosis, such as optic neuritis or brain-stem or spinal cord syndromes, the presence of lesions as determined by T2-weighted magnetic resonance imaging (MRI) of the brain increases the likelihood that multiple sclerosis will develop. We sought to determine the relation between early lesion volume, changes in volume, and long-term disability. METHODS Seventy-one patients in a serial MRI study of patients with isolated syndromes were reassessed after a mean of 14.1 years. Disability was measured with the use of Kurtzke's Expanded Disability Status Scale (EDSS; possible range, 0 to 10, with a higher score indicating a greater degree of disability). RESULTS Clinically definite multiple sclerosis developed in 44 of the 50 patients (88 percent) with abnormal results on MRI at presentation and in 4 of 21 patients (19 percent) with normal results on MRI. The median EDSS score at follow-up for those with multiple sclerosis was 3.25 (range, 0 to 10); 31 percent had an EDSS score of 6 or more (including three patients whose deaths were due to multiple sclerosis). The EDSS score at 14 years correlated moderately with lesion volume on MRI at 5 years (r=0.60) and with the increase in lesion volume over the first 5 years (r=0.61). CONCLUSIONS In patients who first present with isolated syndromes suggestive of multiple sclerosis, the increases in the volume of the lesions seen on magnetic resonance imaging of the brain in the first five years correlate with the degree of long-term disability from multiple sclerosis. This relation is only moderate, so the volume of the lesions alone may not be an adequate basis for decisions about the use of disease-modifying treatment.
High-sensitivity Photo-Electrochemical Heterostructure of the Cuprous Oxide-Metal Organic Framework for a Dioctyl Phthalate Molecularly Imprinted Sensor

Peng-Wei Gao,Ying-Zhuo Shen,Cheng Ma,Qin Xu,Xiao-Ya Hu

DOI: https://doi.org/10.1039/d1an01348c

2021-01-01

The Analyst

Abstract:A metal organic framework/Cu2O heterostructure was combined with a MIP for the construction of a sensitive, stable and selective DOP PEC sensor.
Highly sensitive turn-on electrochemical sensing of organophosphorus pesticides by integration of homogeneous reaction and heterogeneous catalytic signal amplification

Jiawei Liu,Xiang Zhong,Xia Gong,Linbo Deng,Guixia Tan,Qi-E Zhang,Zirui Xiao,Qin Yao,Shuwu Liu,Yansha Gao,Linyu Wang,Limin Lu

DOI: https://doi.org/10.1016/j.foodchem.2024.140275

2024-11-15

Abstract:Enzyme-inhibited electrochemical sensor is a promising strategy for detecting organophosphorus pesticides (OPs). However, the poor stability of enzymes and the high oxidation potential of thiocholine signal probe limit their potential applications. To address this issue, an indirect strategy was proposed for highly sensitive and reliable detection of chlorpyrifos by integrating homogeneous reaction and heterogeneous catalysis. In the homogeneous reaction, Hg2+ with low oxidation potential was employed as signal probe for chlorpyrifos detection since its electroactivity can be inhibited by thiocholine, which was the hydrolysate of acetylthiocholine catalyzed by acetylcholinesterase. Additionally, Co,N-doped hollow porous carbon nanocage@carbon nanotubes (Co,N-HPNC@CNT) derived from ZIF-8@ZIF-67 was utilized as high-performance electrode material to amplify the stripping voltammetry signal of Hg2+. Thanks to their synergistic effect, the sensor exhibited outstanding sensing performance, excellent stability and good anti-interference ability. This strategy paves the way for the development of high-performance OP sensors and their application in food safety.
Carbon Nitride-Based Heterojunction Photoelectrodes with Modulable Charge-Transfer Pathways Toward Selective Biosensing.

Wang Li,Mingming Zhang,Dan Han,Hong Yang,Qing Hong,Yanfeng Fang,Zhixin Zhou,Yanfei Shen,Songqin Liu,Chaofeng Huang,Haibin Zhu,Yuanjian Zhang

DOI: https://doi.org/10.1021/acs.analchem.3c03221

IF: 7.4

2023-01-01

Analytical Chemistry

Abstract:Photoelectrochemical (PEC) sensing enables the rapid, accurate, and highly sensitive detection of biologically important chemicals. However, achieving high selectivity without external biological elements remains a challenge because the PEC reactions inherently have poor selectivity. Herein, we report a strategy to address this problem by regulating the charge-transfer pathways using polymeric carbon nitride (pCN)-based heterojunction photoelectrodes. Interestingly, because of redox reactions at different semiconductor/electrolyte interfaces with specific charge-transfer pathways, each analyte demonstrated a unique combination of photocurrent-change polarity. Based on this principle, a pCN-based PEC sensor for the highly selective sensing of ascorbic acid in serum against typical interferences, such as dopamine, glutathione, epinephrine, and citric acid was successfully developed. This study sheds light on a general PEC sensing strategy with high selectivity without biorecognition units by engineering charge-transfer pathways in heterojunctions on photoelectrodes.
A new plant-esterase inhibition based electrochemical sensor with signal amplification by MoS 2 @N-CDs for chlorpyrifos detection

Jiayu Chen,Chun Ji,Xiao Wang,Yunxia Tian,Han Tao

DOI: https://doi.org/10.1039/d4ra00009a

IF: 4.036

2024-01-01

RSC Advances

Abstract:A new enzyme-inhibited electrochemical biosensor was developed for the low-cost and highly sensitive detection of CPF using MoS 2 @N-CDs as the electrocatalyst and KdBE as the biorecognition element of CPF.

chemistry, multidisciplinary
Photo-electrochemical sensor based on MoO 3 /ZnCdS Z-type heterojunction for detecting 4-Nitrophenol and hexavalent chromium

Ye Li,Jing Zhang,Shuangyan Shang,Feng Wang,He Mei,Huimin Wu

DOI: https://doi.org/10.1016/j.jallcom.2023.171511

IF: 6.2

2023-07-28

Journal of Alloys and Compounds

Abstract:In this study, firstly, Zn x Cd 1ãx S (xô =ô 0.7, 0.5, 0.3) was synthesized. The results from testing show the photocurrent response of Zn 0.3 Cd 0.7 S is better than the other two materials. In order to improve PEC performance, different molar amount of MoO 3 was introduced to synthesize composites MoO 3 /Zn 0.3 Cd 0.7 S-Y (Y=0.10Ð0.20Ð0.25Ð0.30Ð0.40). It is found that the properties of the composites are better than MoO 3 and Zn 0.3 Cd 0.7 S. Furthermore, the results from UVãvisible diffuse reflectance spectroscopy (UVãvis DRS) and photoluminescence (PL) indicate MoO 3 /Zn 0.3 Cd 0.7 S-0.3 has the widest visible light absorption range and the most powerful photogenerated carrier separation capability in all samples. On the basis of analysis, a PEC sensor based on MoO 3 /Zn 0.3 Cd 0.7 S-0.3 was constructed to detect 4-Nitrophenol (4-NP) and hexvalent chromium (Cr (VI)). The linear range of 4-NP sensor is 0.05ã100ô ö¥M, LOD is 0.028ô ö¥M (S/Nô =ô 3). For Cr (VI), these values are 0.1ã240ô ö¥M and 0.019ô ö¥M, respectively. Simultaneously, the sensor has positive stability, reproducibility and selectivity, and can be utilized in actual samples. Hence, the PEC sensor based on MoO 3 /Zn 0.3 Cd 0.7 S-0.3 will have a promising application to detect 4-NP and Cr (VI).

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
In-situ growth of CuI/Porphyrin-based graphdiyne (PDY) p-n heterojunction for high-performance cathodic photoelectrochemical sensing

Yibo Niu,Yu Wang,Linli He,Yujie Wang,Huizhen Ma,Nan Li,Danli Xie,Jianshan Ye,Ying Ma

DOI: https://doi.org/10.1016/j.mtchem.2023.101811

IF: 7.613

2023-11-27

Materials Today Chemistry

Abstract:Cathodic photoelectrochemical (PEC) bioanalysis has been attracting great interest due to its excellent anti-interference capability. As a p-type wide energy band gap semiconductor, CuI is regarded as an ideal material for the construction of photocathodes, while its poor stability and narrow light absorption range limit its application as a photoelectrode in PEC sensing. Herein, we report a simple in-situ growth strategy to synthesize CuI/Porphyrin-based graphdiyne (PDY) p-n heterojunction as a photocathode. CuI crystals were firstly deposited on the ITO glass surface via the electrochemical deposition , and CuI could catalyze the in-situ Glaser coupling reaction of 5,10,15,20-tetra(4-ethynylphenyl) porphyrin (TEPP), allowing the growth of PDY film on the CuI crystal surface and forming the p-n heterojunction photocathode. The as-prepared PDY film plays a crucial role in the significant enhancement of PEC performance because of its intense light absorption, and the formation of CuI/PDY p-n heterojunction can efficiently promote the transportation of photogenerated carriers between CuI and PDY thanks to the excellent electrical conductivity and high carrier mobility of highly π-conjugated PDY. After the growth of PDY, the photocurrent response of PDY/CuI/ITO is almost seven folds higher compared to that of CuI/ITO. Owing to the selective Cu–S bond interaction between l -cysteine (L-Cys) and Cu + , a PEC sensor for the L-Cys determination is developed with a broad linear range from 0.05 to 1.2 μM and a limit of detection (LOD) of 0.03 μM.

chemistry, multidisciplinary,materials science

A highly efficient photoelectrochemical sensor for detection of chlorpyrifos based on 2D/2D β-Bi<sub>2</sub>O<sub>3</sub>/g-C<sub>3</sub>N<sub>4</sub> heterojunctions

Synergistic Effect of Hybrid CdSe Nanobelt/PbI2 Flake Heterojunction Toward Drastic Performance Flexible Photodetectors.

Photoelectrochemical sensor based on Bi2S3 @g-C3N4 heterojunction for the detection of chlorpyrifos

Photonuclear and atomic cross sections of 27Al between 3 and 38 MeV.

A Highly Sensitive and Visible-Light-driven Photoelectrochemical Sensor for Chlorpyrifos Detection Using Hollow Co9S8@CdS Heterostructures

Structural properties of phase-change InSbTe thin films grown at a low temperature by metalorganic chemical vapor deposition.

Steady state CFD modeling of an IT pod and its cooling system

Bifunctional Strategy toward Constructing Perovskite/Upconversion Lab-on-Paper Photoelectrochemical Device for Sensitive Detection of Malathion

One-Step Electropolymerization of Polythiophene Derivative Film for Photoelectrochemical Detection of Chlorpyrifos

Rationally constructed ZnCdS-HDCs@In2S3-HNRs double-hollow heterojunction with promoted light capture capability for photoelectrochemical biosensing

[Supracristal interventricular defects associated with pulmonary infundibular stenosis: a new syndrome].

Semiconducting Organic-Inorganic Nanodots Heterojunctions: Platforms for General Photoelectrochemical Bioanalysis Application

Highly stable and sensitive photoelectrochemical photodetectors based on a ZnO nanorod/monolayer MoS 2 nanosheets heterostructure

A Wavelength-Resolved Ratiometric Photoelectrochemical Technique: Design and Sensing Applications

A longitudinal study of abnormalities on MRI and disability from multiple sclerosis.

High-sensitivity Photo-Electrochemical Heterostructure of the Cuprous Oxide-Metal Organic Framework for a Dioctyl Phthalate Molecularly Imprinted Sensor

Highly sensitive turn-on electrochemical sensing of organophosphorus pesticides by integration of homogeneous reaction and heterogeneous catalytic signal amplification

Carbon Nitride-Based Heterojunction Photoelectrodes with Modulable Charge-Transfer Pathways Toward Selective Biosensing.

A new plant-esterase inhibition based electrochemical sensor with signal amplification by MoS 2 @N-CDs for chlorpyrifos detection

Photo-electrochemical sensor based on MoO 3 /ZnCdS Z-type heterojunction for detecting 4-Nitrophenol and hexavalent chromium

In-situ growth of CuI/Porphyrin-based graphdiyne (PDY) p-n heterojunction for high-performance cathodic photoelectrochemical sensing