Abstract:The use of poly(vinylidene fluoride) (PVDF) microfiltration (MF) membranes to purify oily water has received much attention. However, it is challenging to obtain high-performance PVDF microfiltration membranes due to severe surface fouling and rapid decline of permeability. This study explored a new approach to fabricate high-performance PVDF/silica (SiO2) composite membrane via the use of a polymer solution featuring lower critical solution temperature (LCST) characteristics and the non-solvent thermally induced phase separation method (NTIPS). Coupling with morphological observations, the membrane formation kinetics were analyzed in depth to understand the synergistic effect between the LCST solution properties and fabrication conditions in NTIPS. Utilizing such a synergistic effect, the transition from finger-like macrovoid pores to bi-continuous highly connected pores could be flexibly tuned by increasing the PVDF concentration and the weight ratio of SiO2/PVDF in the dope solution and by raising the coagulation temperature to above the LCST of the solution. The filtration experiments with surfactant-stabilized oil-water emulsion showed that the permeation flux of the PVDF/SiO2 composite membranes was higher than 318 L·m−2·h−1·bar−1 and the rejection above 99.2%. It was also shown that the PVDF/SiO2 composite membranes, especially those fabricated above the LCST, demonstrated better hydrophilicity, which resulted in significant enhancement in the anti-fouling properties for oil/water emulsion separation. Compared to the benchmark pure PVDF membrane in oily water purification, the optimal composite membrane T70 was demonstrated via the 3-cycle filtration experiments with a significantly improved flux recovery ratio (Frr) and minimal reduced irreversible fouling (Rir). Overall, with the developed method in this work, facile procedure to tune the membrane morphology and pore structure was demonstrated, resulting in high performance composite membranes suitable for oil/water emulsion separation.

Fabrication of in‐situ polymerized <scp>UiO</scp>‐66/<scp>PVDF</scp> supramolecular membranes with high anti‐fouling performance

Fabrication of in-situ polymerized UiO-66/PVDF supramolecular membranes with high anti-fouling performance

A Facile Method to Control Pore Structure of PVDF/SiO2 Composite Membranes for Efficient Oil/Water Purification

Fabrication of a novel hollow fiber composite membrane with a double-layer structure for enhanced water treatment

Highly hydrophilic polyvinylidene fluoride (PVDF) ultrafiltration membranes via postfabrication grafting of surface-tailored silica nanoparticles.

Significantly enhanced antifouling and separation capabilities of PVDF membrane by synergy of semi-interpenetrating polymer and TiO<sub>2</sub> gel nanoparticles

Simple and Effective Preparation of Zwitterionic Anti‐Fouling Poly(vinylidene fluoride) Ultrafiltration Membrane by In Situ Cross‐Linking Polymerization Technology

Synthesis of Well-Defined PVDF-Based Amphiphilic Block Copolymer via Iodine Transfer Polymerization for Antifouling Membrane Application

Surface modification of PVDF membrane via deposition-grafting of UiO-66-NH 2 and their application in oily water separations

Fabrication of Hierarchical Poly (vinylidene Fluoride) Micro/nano-Composite Membrane with Anti-Fouling Property for Membrane Distillation

Organic-inorganic composite ultrafiltration membrane with anti-fouling and catalytic properties by in-situ co-casting for water treatment

Fabrication of the Novel Uio-66-Go/Pvdf Composite Membrane

Breaking the Trade-off between Selectivity and Permeability of nanocomposite membrane modified by UIO66@PDA through nonsolvent thermally induced phase separation method

A facile and scalable fabrication procedure for PVDF-PDA/PEI/SiO2 hollow fiber composite ultrafiltration membranes: Integration of co-deposition and cross-linking

Fabrication of omniphobic PVDF composite membrane with dual-scale hierarchical structure via chemical bonding for robust membrane distillation

Fabrication and Characterization of PVDF Membranes Via an in Situ Free Radical Polymerization Method

In-situ Grown Inorganic Layer Coated PVDF/PSF Composite Hollow Fiber Membranes with Enhanced Separation Performance

Preparation of Re-Entrant and Anti-Fouling PVDF Composite Membrane with Omniphobicity for Membrane Distillation

Rapid and Robust Modification of PVDF Ultrafiltration Membranes with Enhanced Permselectivity, Antifouling and Antibacterial Performance

Construction of a composite microporous polyethylene membrane with enhanced fouling resistance for water treatment

Reinforcing hydration layer on membrane surface via nano-capturing and hydrothermal crosslinking for fouling reduction