6.2: <i>Invited Paper:</i> Wearable and Printable Sensors for Human Healthcare Monitoring

Junliang Yang,Pei He,Xiaowen Xu

DOI: https://doi.org/10.1002/sdtp.14366

2021-01-01

SID Symposium Digest of Technical Papers

Abstract:Wearable sensors exhibit outstanding advantages in terms of sensitivity and stability by detecting the dynamics changes in physical signals for human healthcare monitoring. The fabrication of wearable sensors can be integrated into wearable formats such as textile, patches, and wristbands to provide continuous and real-time physiological monitoring via measurements of body motion, skin temperature, heat rate, pulse, and electroencephalography (ECG). [1] Here, we proposed two kinds of sensors for wearable healthcare monitoring. [2-4] Firstly, we developed a highly stretchable and printable polymer composite by adding small amount of silver nanowires in stretchable conductive polymer materials, which shows excellent stretchability up to 500%. The stretchable strain sensor based on the polymer/AgNWs composite can respond to strain signals in real time, even for 1% strain response, and shows excellent stability over 1000 loading/unloading cycles. Moreover, the strain sensor can be attached to human skin and clothed to monitor joints, throat and pulse of the human body. The human body ECG signal was detected successfully with the polymer/AgNWs electrode, which is comparable to the signal obtained by the commercial electrode. Secondly, we developed a wearable electrode for ECG monitoring by screen printing graphene ink on textile. The graphene textile electrode was successfully used to record ECG signals, which showed comparable performance with conventional pre-gelled Ag/AgCl electrode. In addition, the ECG signals obtained from the graphene textile electrodes show good stability after multiple washing cycles and 2000 bending cycles. These effectively achieves on monitoring of human movement and health are expected to be practical in wearable sensors and electronic skin.