Abstract:Saturated soil shear strength is a primary factor that reflects the driving resistance of agricultural machinery in paddy soils. The determination of soil shear strength indicators, such as cohesion and internal frictional angle, is crucial to improve the walking efficiency of agricultural machinery in paddy soils. However, the measurement of these indicators is often costly and time-consuming. Soil moisture content, density, and clay content are crucial factors that affect the cohesion and internal friction angle, while very limited studies have been performed to assess the interactive effects of the three factors on soil shear characteristics, especially on paddy soils. In this study, eight soil samples were taken from eight paddy fields in Southeastern China, and the central composition rotatable design was used to classify the soil samples into five levels based on different clay content (X1), moisture content (X2), and density (X3). The direct shear tests were carried out indoors on the remolded paddy soil using a self-made shear characteristic measuring device. Then, both individual and interactive effects of X1, X2, and X3 on soil cohesion and internal friction angles on paddy soils were systematically investigated and analyzed using the regression analysis method in the data processing software Design-Expert. Our results indicated that the effects of the three environmental factors on soil cohesion were in the order of X1 > X2 > X3, while the order was X2 > X3 > X1 for the impact on internal friction angle. The interactive effects were in the order of X1X2 > X1X3 > X2X3 for cohesion and X1X2 > X2X3 > X1X3 for internal friction angle. Two prediction models were successfully established to quantify the soil cohesion and internal friction angle as affected by soil physical properties, and the coefficient of determination (R2) was 0.91 and 0.89 for the two equations, respectively. The model validations using new soil samples suggested that the models were capable of predicting the shear characteristic parameters under different physical parameters effectively, with errors between predicted and measured soil shear strength indicators within 15% and relative root mean square error less than 11%.

Determination and Application of Microscopic Index Rca in Evaluating the Mechanical Properties of Soils

A New Index for Evaluating Liquefaction Resistance of Soil under Combined Cyclic Shear Stresses

A Rapid Field Measurement Method for the Determination of Joint Roughness Coefficient of Large Rock Joint Surfaces

A Calculation Theory of Earth Pressure Considering Soil Contact Area

Influences of fines content on cyclic resistance ratio of fines-sand-gravel mixtures

A Study on 3D Micro-Topographical Measurement of FRCMC Grinding Surface

Experimental Study on Clay Pore Microstructure Based on SEM and IPP

Study on the progressive fracturing in soil and rock mixture under uniaxial compression conditions by CT scanning

Quantitative Appraisal on the Microstructural Characteristics of Compacted Clayey Soils

Estimation of Soil Shear Strength Indicators Using Soil Physical Properties of Paddy Soils in the Plastic State

Experimental and Numerical Studies on the Direct Shear Behavior of Sand–RCA (Recycled Concrete Aggregates) Mixtures with Different Contents of RCA

Triaxial Tests of Soil–rock Mixtures with Different Rock Block Distributions

A quantitative description method for the mechanical behavior of soil-rock mixture as affected by water content

A new numerical method for constructing the three-dimensional microstructure of S-RM using digital image processing technology

Assessment of Compaction Quality Based on Two Index Parameters from Roller-Integrated Compaction Measurements

Quantification Of Microstructure Of Fine Grained Soil

Numerical Analysis of Soil-Rock Mixture’s Meso-Mechanics Based on Biaxial Test

A crushing index for granular soils based on comminution energy consumption theory

Correlation Analysis between Microscopic Pore Parameters and Macroscopic Mechanical Properties of Rock-like Materials from the Perspective of Water-Cement Ratio and Sand-Cement Ratio

Review of test methods for the micro-pore characteristics of soils

Micro Mechanics Study of Granular Soil Based on the Confined Compression Tests