Abstract:The special wettability of superhydrophobic metal surface endows it with considerable application potential in various fields, but the vulnerability of its surface structure is the biggest obstacle to its extensive application. Herein, a robust superhydrophobic structure on steel surface was prepared using electrospark deposition and electrochemical etching. Electrospark deposition greatly improved the wear resistance of the steel surface, and electrochemical etching further prepared the hierarchical micro-nano-superhydrophobic structure. Besides, the morphology, element distribution, chemical composition, roughness and wettability of the superhydrophobic surface were characterized by SEM, EDS, XPS, FTIR, roughness meter and contact angle meter, respectively. The results showed that the superhydrophobic surface had high roughness and that the structure was beneficial to air storage. Electrospark deposition successfully introduced elements to form alloys on the surface of steel and improved the surface wear resistance. After modification with myristic acid, the prepared rough surface was equipped with excellent superhydrophobicity, and the contact angle of water reached 159° ± 2°. The robustness of the superhydrophobic surface was carefully investigated by carrying out different tests over items including linear friction, sand impact, tape peeling, knife tip scratch, knife edge scratch and hammering. It had been verified that the surface of superhydrophobic steel prepared by electrochemical etching was fragile, and the use of electrospark deposition before electrochemical etching contributed to the higher-level robustness of the superhydrophobic surface structure. In addition, the contact angle of the superhydrophobic surface remained unchanged at a temperature of 250 °C for 24 h, and it showed excellent self-cleaning performance in both chalk and dirty water tests.

Preparation Technology of Water Based Detergent for Q235 Carbon Steel

Prevention of Q235 Steel Corrosion using Waterborne Rust Inhibitor

A wear-resistant superhydrophobic surface on Q235 steel prepared by electrospark deposition and electrochemical etching

Preparation of Robust CuO/TiO2 Superamphiphobic Steel Surface through Chemical Deposition and Sol–Gel Methods†

Synergistic corrosion inhibition effects of quaternary ammonium salt cationic surfactants and thiourea on Q235 steel in sulfuric acid: Experimental and theoretical research

Corrosion Inhibition Of Q235 Steel By Octyl Dimethyl Benzyl Quaternary Ammonium Salt Ionic Liquid

Inhibition effect of green Betaine type surfactants on Q235 steel in 1 mol·L−1 hydrochloric acid: The experimental and theoretical research

Study on Corrosion Inhibition Performance and Mechanism of Quinoline Quaternary Ammonium Salt and L-methionine on Pre-corrosion Q235 Steel

Experimental Study on Alkaline Bath for Carbon Steel Tempering

Preparation and Performance of a Self-Brittle Corrosive Bifunctional Detergent for Corrosive Deep Decontamination of Stainless Steel Surface Based on Controlled Polymerization by the RAFT One-Pot Method

Enhanced Corrosion Inhibition of Q235 Steel by N,S Co-Doped Carbon Dots: A Sustainable Approach for Industrial Pickling Corrosion Inhibitors

Preparation of Sol-Gel Derived Anticorrosive Coating on Q235 Carbon Steel Substrate with Long-Term Corrosion Prevention Durability

The synergistic inhibition effects of oleic imidazoline quaternary ammonium salt and sulfonate on Q235 steel corrosion in HCl media

Studies on the New Treatment Method of Steel Pickling Liquid Waste

An Eco-Friendly Quaternary Ammonium Salt as a Corrosion Inhibitor for Carbon Steel in 5 M HCl Solution: Theoretical and Experimental Investigation

Synthesis of Gemini-type imidazoline quaternary ammonium salt using by-product fatty acid as corrosion inhibitor for Q235 steel

Preparation of Superhydrophobic Coating on X80 Steel and Its Corrosion Resistance in Oilfield Produced Water

Corrosion Inhibition of Q235 Steel by Ionic Liquid Based on the 2-(Dimethylamino) ethyl Methacrylate

A New Imidazole Derivative for Corrosion Inhibition of Q235 Carbon Steel in an Acid Environment

Da/Tio2 Composite Superhydrophobic Coatings with Enhanced Wear Resistance and Oil/Water Separation

Preparation and Corrosion Inhibition of N,N, N-Triethylammonium O,O'-Dicyclohexyldithiophosphate