Abstract:Supercritical fluid heat transfer has great significance for the thermal-hydraulic design and safety performance of the SCWR (Super-Critical Water-cooled Reactor). Experimental studies on heat transfer at prototypical conditions of SCWRs would suffer a huge cost on safety and economy, which strongly limits the research of supercritical water heat transfer. One solution is to adopt model fluid technique which has been applied in thermal and fluids engineering widely. Therefore, finding the equivalent relationship between the experimental data in model fluid and those in prototype fluid becomes a key issue. It means a fluid-to-fluid scaling method is necessary for converting experimental data obtained by using model fluid into the prototype fluid. In the present study, from the perspective of thermo-physical properties similarity and conservation equations similarity, considering the comprehensive influence of the experimental conditions and fluid types, a theoretical study on fluid-to-fluid scaling is performed and most importantly, a new scaling method is proposed. The new scaling method adopts a modification on thermo-physical properties. Several dimensionless numbers are obtained according to the dimensionless momentum and energy governing equations. A new dimensionless number En is derived to present the comprehensive influence of experimental conditions and fluid types. According to the theoretical analysis, an entire set of scaling laws applied for supercritical fluid heat transfer in circular tubes was obtained. Based on the heat transfer data of supercritical R134a, the new scaling method was validated, indicating the feasibility and accuracy of the proposed new scaling method. (C) 2018 Elsevier Ltd. All rights reserved.

Thermophysical Properties and Supercritical Heat Transfer Characteristics of R515A

Numerical Investigations on Supercritical Heat Transfer Characteristics of Environmental Friendly Refrigerants

Reference temperature correction and dimensionless number analysis for heat transfer of supercritical CO2 in horizontal tubes

Numerical study on flow and heat transfer characteristics of R1233zd(E) cooled in horizontal circular tubes under supercritical pressure

A Numerical Study of Supercritical Forced Convective Heat Transfer of N-Heptane Inside A Horizontal Miniature Tube

Numerical Studies of Supercritical Turbulent Convective Heat Transfer of Cryogenic-Propellant Methane

Numerical study of supercritical-pressure fluid flows and heat transfer of methane in ribbed cooling tubes

Research on Convection Heat Transfer Character of Super Critical Carbon Dioxide Flows Inside Horizontal Tube

Heat Transfer Investigation of Supercritical R134a for Trans-Critical Organic Rankine Cycle System

Experimental Study of the Heat Transfer of Supercritical R1234yf As a Substitute for R134a in a Horizontal Micro-Fin Tube

Heat Transfer Characteristics of Different Fluids in Vertical Tube under Supercritical Pressure

Experimental Study of the Heat Transfer Characteristics of Supercritical Pressure R134a in a Horizontal Tube

A Numerical Prediction on Heat Transfer Characteristics from a Circular Tube in Supercritical Fluid Crossflow

Experimental study of in-tube cooling heat transfer and pressure drop characteristics of R134a at supercritical pressures

Effects of Circumferential Heat Conduction on Heat Transfer Characteristics of Supercritical R134a in Horizontal Tubes

Predictions of Heat Transfer Coefficients and Pressure Drops to Supercritical Pressure Hcfc22 Flowing in A Small Tube

A New Method on Fluid-to-fluid Scaling for Heat Transfer in Tubes at Supercritical Pressures

Heat Transfer of R134a in a Horizontal Internally Ribbed Tube and in a Smooth Tube under Super Critical Pressure

Thermodynamic and thermophysical effects enabling high-forced convection heat transfer coefficients in supercritical fluids

Research on the R513A condensation heat transfer characteristics in horizontal microfin tubes

A New Heat Transfer Correlation for Supercritical Fluids