Abstract:In fire events, to utilize catenary effect and accommodate large deformation in beams demands a sufficient deformation capacity and ductility in steel bolted connections, which is not well considered in design practice. Therefore, for performance-based fire safety design, it becomes very essential to accurately predict the fracture behavior of steel bolted connections at elevated temperatures. However, experimentally predicting their fracture behavior is very costly at elevated temperatures and limited by the scale of structural components. Therefore, this paper proposes a numerical analysis approach and investigates the fracture behavior of high-strength bolted steel connections at elevated temperatures based on the validated numerical analysis approach. The temperature-dependent material properties including true stress-strain curves and fracture parameters in a three-stage fracture model (describing the pure tension, pure shear, and combined tension and shear fracture behavior) for high-strength ASTM A325 bolt and A572 Grade 50 steel are firstly calibrated from and validated against their tensile and shear test results. They are further validated against the test results on single-bolted and multi-bolted connections at elevated temperatures, which were not used in the calibration of these material properties. The validated material properties and fracture parameters are finally proposed for fracture prediction of different types of bolted connections under various loading conditions at elevated temperatures. This study shows the potential of reasonable prediction of the fracture behavior for the steel bolted connections at elevated temperatures and under complicated loading conditions using a numerical analysis approach. According to the numerical analysis results, the degradation of shear fracture resistance of A325 bolts at elevated temperatures is more significant than that of A572 Grade 50 steel plate, which may lead to a bolt shear failure mode for these connections with a large end distance at high temperatures (>400 °C). It is also found that the fracture failure mode can significantly influence the degradation of the load and deformation capacities of high-strength steel bolted connections at elevated temperatures. With the bolt shear failure mode, the degradation of load and deformation capacities of steel bolted connections are more significant than that with plate tearing-out failure mode.

The Role of Tendons for Fire Safety Design of Pre‐tensioned Steel Structures

Evaluation of Thermal Effects on Cable Forces of a Long-Span Prestressed Concrete Cable–Stayed Bridge

Research on the cable tension control of spatial steel sturucures consideiung temperature effect

Improved time-hardening creep model for investigation on behaviour of pre-tensioned steel strands subject to localised fire

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Cyclic Behaviours Of Concrete-Filled Steel Tubular Columns With Pre-Load After Exposure To Fire

Effects of Sustained Pre-Load on Residual Strength and Stiffness of Concrete-Filled Steel Tube after Exposure to High Temperatures

Effects of preload and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns

Theoretical analysis and numerical simulation on behaviour properties of large span cable-supported structures under fire conditions

Behaviour of a Two-Pinned Steel Arch at Elevated Temperatures

Behavior of High Strength Structural Steel at Elevated Temperatures

Post-fire mechanical properties of stainless steel cables

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Prestress loss of twisted wire strands and parallel wire strands at elevated temperatures

Design of high strength steel columns at elevated temperatures

Investigation into the Prestress Loss and Thermal Expansion Performance of Steel Cables at High Temperature

Experimental Study on Behavior of Top-and-seat-angle with Double Web-angle (TSDW) Connections under Fire Conditions

Experimental and Numerical Study on High-Temperature Performance of Prestressed CFRP-reinforced Steel Columns

High-temperature mechanical properties and failure modes of UHSS wire for cable-supported bridge

Stress Response Behaviors of Steel Wires at the Anchorage Part of Bridge Cables under Tension and Bending Coupling Loads

Fracture behavior of high-strength bolted steel connections at elevated temperatures