Abstract:The authors regret that Fig. 5 of this paper was incorrect. As a esult, discussion on Fig. 5 needs to be revised. The corrected Fig. 5 nd discussion are given below. The authors would like to apologize or an inconvenience that may have caused to the readers of the ournal. The last sentence of the 5th paragraph in Section 3.1 should e revised as “It can be observed in Fig. 4(b) and (d) that the attice interplanar spacings of 2.48 A, 3.03 A and 3.73 A corresponds to the (002), (020)/(211) and (011) planes of orthorhombic LiMn0.9Fe0.1PO4, respectively, revealing a preferable crystal growth along bc plane.” The sentence “In morphological viewpoint, plate-like particles (S22) with prominent ac plane and small size in [010] direction is expected to provide a higher capacity than spindle-like particles (S21).” is to be deleted in the 1st paragraph in Section 3.2. The word “ac plane” in Section 4 should be revised as “bc plane”.

Corrigendum: Shape‐Controlled Synthesis of NiCo2O4‐rGO As Bifunctional Electrocatalyst for Zn‐Air Battery

Correction: In situ encapsulation of core–shell-structured Co@Co3O4 into nitrogen-doped carbon polyhedra as a bifunctional catalyst for rechargeable Zn–air batteries

Correction: <i>In situ</i> encapsulation of core–shell-structured Co@Co<sub>3</sub>O<sub>4</sub> into nitrogen-doped carbon polyhedra as a bifunctional catalyst for rechargeable Zn–air batteries

Correction: in Situ Study of the Catalytic Mechanism for the Oxygen Reduction Reaction on a Polypyrrole Modified Carbon Supported Cobalt Hydroxide Cathode in Direct Borohydride Fuel Cells.

Correction: Ruthenium oxide coated ordered mesoporous carbon nanofiber arrays: a highly bifunctional oxygen electrocatalyst for rechargeable Zn–air batteries

Erratum to “critical Influence of Carbon Nitride Self-assembly Coating on the Electrochemical Performance of SnO2-TiO2 Nanocomposite Anode Material for Lithium Ion Battery[Int. J. Electrochem. Sci., 11 (2016) 2461-2472]”

Correction To: Thermodynamic and Experimental Analysis of Ni-Co-Mn Carbonate Precursor Synthesis for Li-rich Cathode Materials

Corrigendum: Highly Ordered Mesoporous NiCo2O4 As a High Performance Anode Material for Li-Ion Batteries

Corrigendum: Topochemical Synthesis of Cobalt Oxide‐Based Porous Nanostructures for High‐Performance Lithium‐Ion Batteries

Correction: Ni nanoparticle-decorated-MnO2 nanodendrites as highly selective and efficient catalysts for CO2 electroreduction

Correction: Controllable Design of Multi-Metallic Aerogels As Efficient Electrocatalysts for Methanol Fuel Cells

Correction: Corrigendum: Ruthenium-cobalt Nanoalloys Encapsulated in Nitrogen-Doped Graphene As Active Electrocatalysts for Producing Hydrogen in Alkaline Media

Correction: Porous RuO 2 -Co 3 O 4 /C nanocubes as high-performance trifunctional electrocatalysts for zinc–air batteries and overall water splitting

Corrigendum: Nitrogen-Doped Carbon Embedded MoS2 Microspheres as Advanced Anodes for Lithium- and Sodium-Ion Batteries.

Correction: Ni nanoparticle-decorated-MnO<sub>2</sub> nanodendrites as highly selective and efficient catalysts for CO<sub>2</sub> electroreduction

Corrigendum: A Nickel‐ and Cerium‐Doped Zeolite Composite: an Affordable Cathode Material for Biohydrogen Production in Microbial Electrolysis Cells

Erratum To: Epitaxial Growth of Hyperbranched Cu/Cu2O/CuO Core–shell Nanowire Heterostructures for Lithium-Ion Batteries

Berichtigung: Atomic‐Level Modulation of Electronic Density at Cobalt Single‐Atom Sites Derived from Metal–Organic Frameworks: Enhanced Oxygen Reduction Performance

Correction: Influence of Zn and Co Co-Doping on Oxygen Evolution Reaction Electrocatalysis at MOF-derived N-doped Carbon Electrodes

Corrigendum to “morphology Regulation of Nano LiMn0.9Fe0.1PO4 by Solvothermal Synthesis for Lithium Ion Batteries” [electrochimica Acta 112 (2013) 144-148]

Erratum: Au/Ni12P5 core/shell nanocrystals from bimetallic heterostructures: in situ synthesis, evolution and supercapacitor properties