Abstract:Chlorpyrifos (CPF) is one of the most widely used pesticides in the world, and its improper use will cause serious pollution to ecological safety and water environment. There is an urgent need for an efficient, environmental-friendly, and cost-effective removal technology. ZVI@Al mix (mixed zero-valent iron and aluminum) is a potential technology for degrading CPF by combining it with ZVI (zero-valent iron), ZVAl (zero-valent aluminum) and ZVI@Al sup (supported zero-valent iron and aluminum). This technology can efficiently degrade CPF, achieving a removal rate of 93.47% and a complete mineralization rate of 62.15% at the concentration of 10 mg/L, pH of 7.0, temperature of 25°C, and ZVI@Al mix dosage of 0.30 g/L, and can effectively alleviate the interference of anions and HA in actual wastewater. The elemental evolution and solution composition of ZVI@Al mix indicates that the material has an activation effect on O 2 in solution. The existence of •OH and O 2 -• in the reaction and the degradation of CPF were confirmed by quenching experiments and electron spin resonance. In addition, Al provides electronic output for ZVI, which prolongs the life of ZVI and guarantees the sustainable degradation ability of ZVI@Al mix . The detection of pollutant degradation intermediates initially proposed two degradation pathways, the cleavage of C-O-P bonds, and the substitution of S and methyl groups. DFT calculation proves that pathway I is more favorable in the reaction process, and the toxicity assessment also shows that the product toxicity of pathway I is slightly lower than that of pathway II. Finally, ZVI@Al mix has strong reusability, the removal rate of CPF in the fourth reuse process can still reach 80.91%, and the material recovery in the fifth time can still reach 80.46%. This study proposed a mechanism to degrade CPF using cheap bimetallic particles and confirmed its feasibility through practice and theory. These findings not only provide an efficient, green, and economical pollution control technology for the removal of organophosphorus pesticides in the wastewater but also provide new ideas for the application of ZVI-based bimetallic materials in the field of environmental governance.

Degradation of 4-Chlorophenol Through Activating Oxidants Byzero-Valent Al/Fe-saturated Attapulgite Composites

The Co-Activation of Persulfate with Tannic Acid and Sodium Hydroxide for the Degradation of p-Chlorophenol

Enhanced Reactivity of Zero-Valent Aluminum/o2 by Using Fe-bearing Clays in 4-Chlorophenol Oxidation.

Removal of 4-Chlorophenol from Polluted Water by Aluminum-Iron Alloys.

Synergistically enhanced activation of persulfate for efficient oxidation of organic contaminants using a microscale zero-valent aluminum/Fe-bearing clay composite

Enhanced reactivity of zero-valent aluminum with ball milling for phenol oxidative degradation

Iron(II) sulfate crystals assisted mechanochemical modification of microscale zero-valent aluminum (mZVAl) for oxidative degradation of phenol in water

Selective Conversion of Organic Pollutant P-Chlorophenol to Formic Acid Using Zeolite Fenton Catalyst

Ferrous oxalate covered ZVI through ball-milling for enhanced catalytic oxidation of organic contaminants with persulfate

Surface-bound Radical Control Rapid Organic Contaminant Degradation Through Peroxymonosulfate Activation by Reduced Fe-bearing Smectite Clays.

Sustainable and efficient degradation of chlorpyrifos by the synergy mixed Fe-Al (ZVI@Al mix ) bimetallic particles: performance and mechanism

Carbon-modified/embedded zero-valent aluminum microparticles will control electron release for efficient adsorption and degradation of aqueous pollutants

Enhanced degradation of 4-Cholophenol by activation of peroxymonosulfate with Fe-MOF@Mn 2 O 3 : Performance and mechanism

Fast degradation of atrazine by nZVI-Cu 0 /PMS: Re-evaluation and quantification of reactive species, generation pathways, and application feasibility

Efficient atrazine degradation via photoactivated SR-AOP over S-BUC-21(Fe): The formation and contribution of different reactive oxygen species

Designing hierarchically porous zero-valent iron via 3D printing to degrade organic pollutants by activating peroxymonosulfate using high-valent iron-oxo species

Efficient catalytic degradation of bisphenol A coordinated with peroxymonosulfate via anchoring monodispersed zero-valent iron on natural kaolinite

Tailored anthraquinone-based covalent organic frameworks boosted atrazine degradation through peroxymonosulfate activation driven by visible light

Oxalic acid enhanced removal of heavy metal and pesticide by peroxymonosulphate activation with a green biochar iron composite: Reactivity and mechanism

Facilitated catalytic ozonation of atrazine over highly stabilized Zn-Al layered double oxides composites: efficacy and mechanism

Amorphous Zirconium Oxide Activates Peroxymonosulfate for Selective Degradation of Organic Compounds: Performance, Mechanisms and Structure-Activity Relationship