Abstract:Chlorpyrifos (CPF) is one of the most widely used pesticides in the world, and its improper use will cause serious pollution to ecological safety and water environment. There is an urgent need for an efficient, environmental-friendly, and cost-effective removal technology. ZVI@Al mix (mixed zero-valent iron and aluminum) is a potential technology for degrading CPF by combining it with ZVI (zero-valent iron), ZVAl (zero-valent aluminum) and ZVI@Al sup (supported zero-valent iron and aluminum). This technology can efficiently degrade CPF, achieving a removal rate of 93.47% and a complete mineralization rate of 62.15% at the concentration of 10 mg/L, pH of 7.0, temperature of 25°C, and ZVI@Al mix dosage of 0.30 g/L, and can effectively alleviate the interference of anions and HA in actual wastewater. The elemental evolution and solution composition of ZVI@Al mix indicates that the material has an activation effect on O 2 in solution. The existence of •OH and O 2 -• in the reaction and the degradation of CPF were confirmed by quenching experiments and electron spin resonance. In addition, Al provides electronic output for ZVI, which prolongs the life of ZVI and guarantees the sustainable degradation ability of ZVI@Al mix . The detection of pollutant degradation intermediates initially proposed two degradation pathways, the cleavage of C-O-P bonds, and the substitution of S and methyl groups. DFT calculation proves that pathway I is more favorable in the reaction process, and the toxicity assessment also shows that the product toxicity of pathway I is slightly lower than that of pathway II. Finally, ZVI@Al mix has strong reusability, the removal rate of CPF in the fourth reuse process can still reach 80.91%, and the material recovery in the fifth time can still reach 80.46%. This study proposed a mechanism to degrade CPF using cheap bimetallic particles and confirmed its feasibility through practice and theory. These findings not only provide an efficient, green, and economical pollution control technology for the removal of organophosphorus pesticides in the wastewater but also provide new ideas for the application of ZVI-based bimetallic materials in the field of environmental governance.

Carbon-modified/embedded zero-valent aluminum microparticles will control electron release for efficient adsorption and degradation of aqueous pollutants

Graphite-modified Zero-Valent Aluminum Prepared by Mechanical Ball Milling for Selective Removal of Hydrophobic Carbon Tetrachloride

Surface modified zero-valent aluminum for Cr(VI) removal at neutral pH

Enhanced reactivity of zero-valent aluminum with ball milling for phenol oxidative degradation

Iron(II) sulfate crystals assisted mechanochemical modification of microscale zero-valent aluminum (mZVAl) for oxidative degradation of phenol in water

A novel ball-milled aluminum-carbon composite for enhanced adsorption and degradation of hexabromocyclododecane

Degradation of 4-Chlorophenol Through Activating Oxidants Byzero-Valent Al/Fe-saturated Attapulgite Composites

Synergistically enhanced activation of persulfate for efficient oxidation of organic contaminants using a microscale zero-valent aluminum/Fe-bearing clay composite

Application potential of zero-valent aluminum in nitrophenols wastewater decontamination: Enhanced reactivity, electron selectivity and anti-passivation capability

Removal of 4-Chlorophenol from Polluted Water by Aluminum-Iron Alloys.

Research Progress of Removal of Pollutants from Wastewater by Zero-valent Aluminum

Improved Electron Efficiency of Zero-Valent Iron towards Cr(VI) Reduction after Sequestering in Al2O3 Microspheres

Enhanced Reactivity of Zero-Valent Aluminum/o2 by Using Fe-bearing Clays in 4-Chlorophenol Oxidation.

Spinel ferrite-enhanced Cr(VI) removal performance of micro-scale zero-valent aluminum: Synergistic effects of oxide film destruction and lattice spacing expansion

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Citrate ligand-enhanced microscale zero-valent aluminum corrosion for carbon tetrachloride degradation with high electron utilization efficiency

Recycling of waste aluminum scraps to fabricate sulfidated zero-valent iron-aluminum particles for enhanced chromate removal

Uniformly Coating ZnAl Layered Double Oxide Nanosheets with Ultra-Thin Carbon by Ligand and Phase Transformation for Enhanced Adsorption of Anionic Pollutants.

Designing hierarchically porous zero-valent iron via 3D printing to degrade organic pollutants by activating peroxymonosulfate using high-valent iron-oxo species

Sustainable and efficient degradation of chlorpyrifos by the synergy mixed Fe-Al (ZVI@Al mix ) bimetallic particles: performance and mechanism

Oxalic acid enhanced removal of heavy metal and pesticide by peroxymonosulphate activation with a green biochar iron composite: Reactivity and mechanism