Light Management Strategies for Perovskite/silicon Tandem Solar Cells

Xiaoyu Fang,Yuchao Hu,Mingzhen Liu

DOI: https://doi.org/10.1360/tb-2021-1378

2022-01-01

Chinese Science Bulletin (Chinese Version)

Abstract:Advanced solar cells can efficiently utilize solar energy and convert it into electrical energy. Currently, silicon-based solar cells occupy the guide position of the photovoltaic market. After several years of development, the current highest photoelectric conversion efficiency (PCE) of silicon solar cells can reach 26.7%, which is very close to the Shockley-Queisser limit (similar to 30%), making further improvement difficult. The emergence of tandem solar cells provides a promising strategy to break such limit and realize a PCE theoretically up to 44%, which demonstrates great potential in further expanding the application of solar cells. Silicon-based tandem cells are normally formed by stacking a wide-bandgap top cell on a silicon cell. and the absorption range of the entire device to the solar spectrum can be broadened and the thermal relaxation loss effectively reduced. Perovskite solar cells (PSCs), using metal halide perovskite material as the light absorption layer. has drawn increasing attention recently. because perovskite material shows high absorption coefficient, small exciton binding energy, high carrier mobility and long carrier diffusion length. More importantly, the band gap of perovskite material can be easily controlled by doping of component elements. The efficiency record of PSCs has rapidly increased from 3.8% to 25.7% in the past decade. Meanwhile. they can be fabricated via low temperature methods such as solution-coating method and vacuum vapor deposition method, making it possible to be technologically integrated on silicon substrates. Besides, silicon and perovskite solar cells show matched band gaps, which guarantees a wide total wavelength range of solar irradiation absorption. Therefore, PSCs are perfect candidates of top cells for silicon-based tandem cells. Recently. rapid progress has been made in two-terminal perovskite/silicon tandem solar cells. achieving an astonishing PCE of 29.8% in just several years. To obtain a highly efficient perovskite/silicon tandem solar cell. light management is of great significance to efficiently convert light into current and restrict energy losses. On the one hand, since narrow bandgap subcell (silicon solar cell) and wide bandgap subcell (perovskite solar cell) are connected in series, the overall device current is limited by the sub-cell of the smaller current. Therefore. it is necessary to adjust the bandgap of the sub cells to allocate the light that they absorbed and generate matched photocurrents. On the other hand, incident sunlight suffers from severe absorption loss via light reflex and parasitic absorption, which means the photons cannot be fully utilized to generate photo-generated carriers and realize a decent photocurrent. A large amount of previous work has been done in optimizing light management for improvement of two-terminal perovskite/silicon tandem solar cells. To adjust the bandgap of perovskite solar cells, element ratio was flexibly modulated. Meanwhile, to minimize light absorption loss, appropriate functional layers with reduced parasitic absorption were applied, and light trapping structures were designed. This review first introduces the main causes of light absorption loss. and then overviews the recent progress in light management of two-terminal perovskite/silicon tandem solar cells. We summarize efficient light management strategies for perovskite top cell and silicon bottom cell, respectively. Finally, we provide our perspectives on promising light management methods for tandem solar cells in the future.