Abstract:Understanding evolution of microstructure and surface morphology is essential for studying the strength of building material in acidic enviorment. In this study, the microstructure of limestone samples immersed in acidic solutions of varying pH values was evaluated by nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM), while the joint surface morphology evolution process was determined by three-dimensional (3D) scanning experiments. Further, direct shear tests on the immersed jointed samples were conducted for shear properties analysis. It is found that the pore size distribution gradually changes from nanopore to micropore with the decrease in pH value, while the single pore area and perimeter increased and the fractal dimension decreased. Therefore, the increased pore distribution, enlarging in area, and change in the shape of the pores altered the microstructure and caused the increase in porosity. Also, with the decrease in pH value, the decrease rate of 3D relative fluctuation height, angle, and 3D area ratio increase. The 3D average fluctuation angle decreases the most, whereas the 3D area ratio decreases the least. In an acidic environment, the 3D surface morphology is significantly influenced by the 3D average fluctuation angle, which eventually changes joint roughness. Under the condition of acidic underground water, the microstructure of the joint wall and surface morphology of the joint degraded, thereby affecting the joint shear behavior. Therefore, the degradation of joint roughness coefficient and joint wall compressive strength should be considered for evaluating the joint mechanical properties in an acidic environment.

A Study of Deterioration Problems on Jinshi Steles at the Confucian Temple in Beijing

Deterioration of Yungang Grottoes: Diagnosis and research

Deterioration characteristics of the bond between reinforcement and concrete subjected to freezing-thawing cycles and steel corrosion

An exploratory study of the deterioration mechanism of ancient wall-paintings based on thermal and moisture expansion property analysis

The Protective Effect Of Grease Stains Caused By Hands Touching Stone Relics

Deterioration of Historic Carved Stone at Mount Tai by Simulated Acid Rain

Study on the Mechanism of the Black Crust Formation on the Ancient Marble Sculptures and the Effect of Pollution in Beijing Area

A Study of Immovable Cultural Relics' Preservation Environment

Weathering Characteristics of White Marble Relics Around the Hall of Supreme Harmony (Taihe Dian) in the Forbidden City

REVIEW AND PROSPECT ON STUDY ON DETERIORATION OF THE HARD HISTORIC HERITAGES

Investigation of Deterioration for Large Outdoor Iron Statues Relics: A Case Research of Chairman MAO Iron Statue in Qinghai, China

Assessment of Damage from Organic Protective Coating Treatments to Historic Stone Buildings and Sculptures

Characterization and Origin of Weathering Crusts on Kylin Carved-Stone, Kylin Countryside, Nanjing – A Case Study

Study on the Performance of the Repair Material of Fine Clay Layer for Avalokitesvara Statue of Dule Temple

THE EFFECTS OF SIMULATED ACID RAIN ON THE DETERIORATION OF CARVED STONE

Effects of air pollution on weathering of Qilin carved stone,Qilin Town,Nanjing

Experimental Investigation on Microstructure and Surface Morphology Deterioration of Limestone Exposed on Acidic Environment

Environmental Factor Accelerate the Deterioration of Tuff Stone Heritage: A Case Study of a Stone House in Southeast China

Testing and Evaluation Technique for the Effectiveness of Chemical Cleaning Contamination on Immovable Historic Stone

Diversity and Composition of Culturable Microorganisms and Their Biodeterioration Potentials in the Sandstone of Beishiku Temple, China

Exfoliation of stone cultural relics under the microclimate in the Yongling Mausoleum of the Former Shu Dynasty