Abstract:Refractory rhenium (Re) has a wide application prospect in the field of aerospace. Electrodeposition technology in molten salts could be used to prepare high-quality Re coatings with thicknesses from several microns up to several millimeters efficiently. For understanding the influences of molten salt composition on the microstructure and properties of the electrodeposited Re coatings, the effects of CsCl content on the microstructure and mechanical properties of the electrodeposited Re coatings in NaCl-KCl-CsCl molten salts were studied in this paper. The results showed that the nodulation tendency on the Re coating surface is weakened with increasing CsCl content, resulting in an improved coating apparent quality. The tensile strength of the electrodeposited Re decreased slightly with increasing CsCl, with a minimum value of 748 MPa. The fracture elongations of the aselectrodeposited Re coatings were less than 5%, and increased slightly with increasing CsCl content. The grain growth of the Re coatings, prepared in the melts with a relatively higher CsCl content, becomes insignificant after high-temperature annealing, indicating that the microstructure stability of the Re coating at high temperatures is improved with increasing CsCl content. After annealing at 1000-1600 degrees C in hydrogen atmosphere, the elongations of the Re coatings steadily increased to 15-20%. Based on the coating quality and mechanical properties, the optimal CsCl content in the molten salts was 40-60 wt%. The electroformed Re in these melts, followed by an annealing at 1400-1600 degrees C in hydrogen, has a tensile strength over 700 MPa and an elongation of similar to 20%.

Effects of CsCl Content on Microstructure and Mechanical Properties of Electrodeposited Rhenium Coatings in NaCl-KCl-CsCl Molten Salts

Surface morphology, microstructure and emissivity of rhenium electrodeposited from molten salts

The Form of Electrodeposited Iridium Ions in a Molten Chloride Salt and the Effects of Different Iridium Concentrations

Effects of Re microalloying on glass formation and mechanical properties of Zr–Cu–Al alloys

Electrodeposition of aluminum on rare earth alloy surface in room temperature molten salts

Electrolytic production and characterization of nickel–rhenium alloy coatings

Influence of rhenium on hot corrosion resistance of CoNiCrAlY coating alloys

Effects of microstructure on corrosion behaviors for RE2SiO5 (RE=Gd, Y, Er) environmental barrier coatings against calcium-magnesium-alumino-silicate melts

Influence of Re on the Plastic Hardening Mechanism of Alloyed Copper

Influence of Re addition amount on structure, mechanical, oxidation as well as corrosion behaviors of WC-15Co cemented carbide

Microstructure of Rhenium Doped Ni-Cr Deposits Produced by Laser Cladding

Synthesis of high-crystalline ReS<sub>2</sub> monolayers by sodium-assisted chemical vapor deposition

Condition Dependence of Zr Electrochemical Reactions and Morphological Evolution of Zr Deposits in Molten Salt

Effects of minor rhenium additions on the thermal properties and recrystallization temperature of tungsten alloy

Strengthening effect of rhenium on different substitution positions of tungsten nanofilm at high temperature: DFT and molecular dynamics simulation

Improvement of corrosion resistance of Ni-based alloy by adding 5 wt.% Rhenium

Mechanisms of Rhenium on Wettability and Interactions Between Nickel-Base Superalloy Melt and Al2O3-Based Ceramic Material

Molten salt electrodeposition of aluminum on mild steel: effect of process parameters on surface morphology and corrosion properties

Tailoring of rhenium oxidation state in ReOx thin films during reactive HiPIMS deposition process and following annealing

The preparation and properties of iron base self-fluxing alloy spray-welding coatings with different rare earths and chromium content

Crystallization of Rhenium Salts in a Simulated Low‐Activity Waste Borosilicate Glass