Soft active materials and soft robots surviving extremely high hydrostatic pressure

QU Shao-xing

DOI: https://doi.org/10.6052/1000-0992-21-029

2021-01-01

Abstract:The experiment proves that the soft robot can be driven under extremely high hydrostatic pressure (110 MPa), with actuators made of soft active materials and the electromechanical system constructed via the soft-hard hybrid method.

What problem does this paper attempt to address?

Artificial muscle driven soft hydraulic robot: electromechanical actuation and simplified modeling

Mingqi Zhang,Guori Li,Xuxu Yang,Youhua Xiao,Tao Yang,Tuck-Whye Wong,Tiefeng Li

DOI: https://doi.org/10.1088/1361-665X/aacfe3

IF: 4.1

2018-01-01

Smart Materials and Structures

Abstract:Soft pneumatic actuators possess attributes of large deformation, high driving force and light weight in the application of soft robots and smart devices. However, most reported soft pneumatic actuators are with rigid hydraulic source such as motor driven pump, piston and pressurized reservoir. These rigid and heavy hydraulic sources limit the actuation and compliance of the soft robots. Inspired by the bladders and hydrostatic skeleton of natural creatures, we propose a soft hydraulic robot consisting of dielectric elastomer (DE) and hydrogel, exhibiting an excellent actuating performance. An inflated DE balloon functions as the soft hydraulic source, in which the pressure of the containing water can be tuned by voltage. Hydrogel chambers are connected to the DE balloon as the hydraulic actuator, deforming as a soft robotic gripper. A new analytical approach is proposed to describe the system's behaviors, which couples the electromechanical actuation of DE and the hydraulic deformation of hydrogel chamber. The proposed model is validated by good agreement between the numerical and experimental data. The proposed model could serve as a new tool for modeling and characterizing soft robots with hydraulic actuation. The working principles can guide the design and control of soft robots and smart structures.
REVIEW OF MATERIALS AND STRUCTURES IN SOFT ROBOTICS

Li Tiefeng,Li Guorui,Liang Yiming,Cheng Tingyu,Yang Xuxu,Huang Zhilong

DOI: https://doi.org/10.6052/0459-1879-16-159

2016-01-01

Abstract:Soft robot is a novel category of robotics. Possessing the characteristics of high flexibility, high environmental adaptability, high compatibility and multi-functionality, soft robots are quite promising in research and practical appli-cations. The performances of soft robots are largely enhanced by the unique properties of smart materials, which play a crucial role in the design and application of soft robots. This paper summarizes existing soft robots by their actuat-ing mechanisms and functions into typical categories as worm-like peristaltic moving, caterpillar-like bending actuation, fish-swimming soft robotics. Furthermore, by their actuating mechanisms, soft robots are summarized as air pressure powered, shape memory alloy (SMA), ionic polymer metal composite (IPMC), dielectric elastomer (DE), responsive hydrogel, chemical combustion powered robotics. This paper reviews and discusses the fabricating method, the current challenges and future prospects of soft robots.
Investigation of the State Transition and Moving Boundary in a Pneumatic–Hydraulic Coupled Dielectric Elastomer Actuator

Liyuan Chen,Weijia Chen,Yaoting Xue,Mingqi Zhang,Xiangping Chen,Xunuo Cao,Zhen Zhang,Guorui Li,Tiefeng Li

DOI: https://doi.org/10.1115/1.4042136

2019-01-01

Abstract:Compared to robots and devices made of rigid components, soft robots and flexible devices driven by soft active materials possess various advantages including high adaptability under extreme environment and compatibility with a human. Dielectric elastomer (DE) membrane, which is commonly used in building soft actuators, can achieve large actuation by the combined loadings of voltage-induced Maxwell stress and fluidic pressures (pneumatic and hydraulic pressure). This paper proposes a pneumatic–hydraulic coupled electromechanical actuator (PHCEA), which exhibits strong coupling effect of electromechanical actuation (the Maxwell stress on DE membrane), pneumatic and hydraulic pressures. Considering the moving boundary and state transition, a computational model has been developed to investigate the coupling behaviors of the PHCEA. The numerical result by this model is in accordance with the experimental measurements. The combination of experimental data and the theoretical result indicates that the state transition and moving boundary separate the potential region of electrical breakdown and mechanical damage. This model can be utilized as a practical method to characterize the performance and guide the design of soft devices. The experimental setup and computational method of the PHCEA bring new insights into the fabrication and characterization of soft robots, adaptive optics, and flexible bio-medical devices. The PHCEA possesses wide applications in underwater robots, soft muscles, and microfluidics systems. It can serve as the gas bladder of soft swimming robots, the soft actuator of hydraulic–pneumatic coupling systems, and the gas–liquid valve of flexible microfluidics systems.
Electromechanical Control and Stability Analysis of A Soft Swim-Bladder Robot Driven by Dielectric Elastomer

Bangyuan Liu,Feiyu Chen,Sukai Wang,Zhiqiang Fu,Tingyu Cheng,Tiefeng Li

DOI: https://doi.org/10.1115/1.4037147

2017-01-01

Abstract:Compared to the conventional rigid robots, the soft robots driven by soft active materials possess unique advantages with their high adaptability in field exploration and seamless interaction with human. As one type of soft robot, soft aquatic robots play important roles in the application of ocean exploration and engineering. However, the soft robots still face grand challenges, such as high mobility, environmental tolerance, and accurate control. Here, we design a soft robot with a fully integrated onboard system including power and wireless communication. Without any motor, dielectric elastomer (DE) membrane with a balloonlike shape in the soft robot can deform with large actuation, changing the total volume and buoyant force of the robot. With the help of pressure sensor, the robot can move to and stabilize at a designated depth by a closed-loop control. The performance of the robot has been investigated both experimentally and theoretically. Numerical results from the analysis agree well with the results from the experiments. The mechanisms of actuation and control may guide the further design of soft robot and smart devices.
Test for the Deep: Magnetic Loading Characterization of Elastomers under Extreme Hydrostatic Pressures

Yukai Zhao,Chengqian Zhang,Xuxu Yang,Xunuo Cao,Tao Feng,Fanghao Zhou,Xuanqi Wang,Peng Zhao,Tiefeng Li

DOI: https://doi.org/10.1088/2631-7990/ad5bc5

2024-06-27

International Journal of Extreme Manufacturing

Abstract:Soft robot incarnates its unique advantages in deep-sea exploration, but grapples with high hydrostatic pressure's unpredictable impact on its mechanical performances. In our previous work, a self-powered soft robot has shown excellent work performance in the Mariana Trench at a depth of 11,000 meters, yet experienced notable degradation in deforming capability. Here we propose a magnetic loading method of characterizing elastomer's mechanical properties under extremely high hydrostatic pressure up to 120 MPa. This method facilitates remote loading and enables in-situ observation, so that the dimensions and deformation at high hydrostatic pressure are obtained and used for calculations. The results revealed that the Young's modulus of Polydimethylsiloxane (PDMS) monotonously increases with pressure. It has also been found that the relative increase in Young's modulus is determined by its initial value, which is 8% for an initial Young's modulus of 2200 kPa and 38% for 660 kPa. The relation between initial Young's modulus and relevant increase can be fitted by an exponential function. The bulk modulus of PDMS is about 1.4 GPa at 20 °C and is barely affected by hydrostatic pressure. The method can quantify alterations in the mechanical properties of elastomers induced by hydrostatic pressure, and provide guidance for the design of soft robots which serves for extreme pressure environment.

materials science, multidisciplinary,engineering, manufacturing
Effects of Extreme Hydrostatic Pressure on the Molecular Structure and Properties of the Elastomeric Material for Soft Robots

Baocai Zhang,Chengqian Zhang,Chengfeng Pan,Baoquan Zhang,Pengju Pan,Tiefeng Li,Peng Zhao

DOI: https://doi.org/10.1016/j.matdes.2024.112686

IF: 9.417

2024-01-01

Materials & Design

Abstract:The successful exploration of the Mariana Trench, Earth's deepest trench, by soft robots inspired by deep-sea organisms, showcasing the potential of soft robots for extreme deep-sea exploration. However, deep-sea extreme pressure significantly alters the structure and properties of robot materials, affecting their detectability. In this study, to ensure soft robots maintain excellent performance even in such extreme environments, meticulous attention is devoted to these pressure-induced changes before designing them. The results demonstrate that applying pressure (416.67 MPa) can induce the glass transition in silicone rubber (SR) even at room temperature. Unlike the traditional realization mechanism (cooling material to its glass transition temperature (Tg)), the realization mechanism through pressurizing is reported that adjusting the Tg of target material to approach a specific temperature. Furthermore, the different transition mechanisms under the two realizations are also revealed. Based the dynamic analysis of SR under extremely low temperature and high pressure, the glass transition pressure (Pg) is proposed, and the glass transition strategy by jointly regulating temperature and pressure to construct equivalent extreme pressure environment is also investigated. This study, taking SR as the case study, holds significant importance for the future development of extreme pressure-resistant soft robots for extreme environment exploration.
Machine-learning-accelerated design of functional structural components in deep-sea soft robots

Shunyu Yin,Zheng Jia,Xinge Li,Jiakai Zhu,Yi Xu,Tiefeng Li

DOI: https://doi.org/10.1016/j.eml.2022.101635

IF: 4.728

2022-01-01

Extreme Mechanics Letters

Abstract:To explore the deepest regions of the ocean with high flexibility and environmental adaptability, deep-sea soft robots have been developed recently. One prominent example is the self-powered soft robot that successfully operated in the Mariana Trench at a depth of 11,000 meters. Notably, many functional electronic components such as resistive elements, capacitors, and crystal oscillators may fail under extreme hydrostatic pressure, posing significant challenges for the practical massive deployment of deep-sea soft robots. Consequently, designing miniature pressure vessels on the printed circuit board to protect these vulnerable electronic components is vital for enhancing the reliability of deep-sea soft robots. However, traditional structure design methods - which often rely on theoretical analysis, experimental testing and numerical simulations - are often costly and time-consuming, especially for design problems in high-dimensional design spaces. Herein, we demonstrate a machine learning-accelerated design method for devising miniature pressure vessels for vulnerable electronic components in deep-sea soft robots. Machine learning algorithms including decision trees and neural network models are employed and compared. The resulting design algorithm can predict whether a specific design can survive the deep-sea hydrostatic pressure with high accuracy in similar to 0.35 ms, roughly seven orders of magnitude faster than traditional design methods. (c) 2022 Elsevier Ltd. All rights reserved.
A Bioinspired Shape Memory Alloy Based Soft Robotic System for Deep‐Sea Exploration

Yi Xu,Jiangshan Zhuo,Mingyu Fan,Xinge Li,Xunuo Cao,Dongrui Ruan,Hejinsheng Cao,Fanghao Zhou,Tuck-Whye Wong,Tiefeng Li

DOI: https://doi.org/10.1002/aisy.202300699

IF: 7.298

2024-01-01

Advanced Intelligent Systems

Abstract:Developing robots integrating sensors, actuators, and computational capabilities for deep‐sea exploration is challenging. Nature often offers innovative solutions to complex problems, and in this context, inspiration is drawn from the remarkable abilities of deep‐sea snails, specifically their unique tentacles, often referred to as “eyestalks” due to the presence of an eye at their tip. Herein, “DeepStalk,” a soft robot designed for deep‐sea exploration, is introduced, utilizing three shape memory alloys (SMAs) springs that mimic the three tentacle flexor muscles of deep‐sea snails. Overall, DeepStalk incorporates sensory, actuation, and control modules for operation under high hydrostatic pressure. To achieve precise control of its orientation in 3D space, a simple and reliable vector‐PID controller is developed. Remarkably, the robot successfully maintains its desired bending attitude even at 30 MPa hydrostatic pressure, achieved through the Joule heating of SMA springs. Furthermore, DeepStalk demonstrates the capability to track moving objects underwater, showcasing its potential application in challenging environments at depths of up to 20 MPa. This marks the first attempt for soft robots to integrate sensor, actuator, and control modules capable of complex tasks under high hydrostatic pressure. This innovative research advances integrated soft robotic systems for deep‐sea exploration field.
An Experimental Study of Bellows-Type Fluidic Soft Bending Actuators under External Water Pressure

Enlai Sun,Tao Wang,Shiqiang Zhu

DOI: https://doi.org/10.1088/1361-665x/ab9518

IF: 4.1

2020-01-01

Smart Materials and Structures

Abstract:Soft actuators which are composed of low-modulus material have broad application prospects in marine exploration tasks such as biological sampling due to their inherent compliance and adaptability. However, the influence of underwater pressure on the soft actuators remains to be studied. In this work, an experimental study of bellows-type fluidic soft bending actuators fabricated with 3D printing technology is implemented. Deep sea test environment is simulated by adjustable external water pressure. The response of the soft actuator to the input pressure under different external pressure (from 1 atm to 15 MPa) is presented and discussed. The results show that the external water pressure can cause the actuator to bend more in both static and dynamic conditions. Moreover, the increase of the bending angle is positively related with the environment pressure. In general, the feasibility of the soft actuators and the fluid power system for underwater applications are verified. This work can provide experimental reference for the design and control of soft manipulators in marine operation.
Earthworm‐Inspired Multi‐Material, Adaptive Strain‐Limiting, Hybrid Actuators for Soft Robots

Quan Xiong,Benjamin W. K. Ang,Tao Jin,Jonathan W. Ambrose,Raye C. H. Yeow

DOI: https://doi.org/10.1002/aisy.202200346

IF: 7.298

2023-01-01

Advanced Intelligent Systems

Abstract:This research presents a new class of versatile multi‐material hybrid actuators (MASH actuators), powered by pneumatics and electrostatic adhesion (EA)‐based adaptive strain‐limiting layers. Soft pneumatic actuators with strain‐limiting layers as the mainstream actuation for soft robotics have been developed for decades. However, due to their permanent strain‐limiting layers, those actuators possess fewer motion patterns. Inspired by the longitudinal muscles of the earthworm, a concept of an adaptive strain‐limiting layer with the ability to vary its length, stiffness, and position is presented. By integrating two flexible EA brakes into a soft pneumatic actuator as adaptive strain‐limiting layers, the actuator can achieve multiple motion patterns including extension, contraction, and bilateral bending, with permutations among these motions. The EA‐based strain‐limiting layer can increase the original actuator length by up to 86%, and the baseline actuator stiffness by up to 605%. To demonstrate its potential in locomotion and manipulation, an earthworm‐inspired crawling robot possessing great terrain adaptability and a versatile soft robotic gripper based on this hybrid actuator concept are developed.
Reconfigurable Transparent Variable‐Stiffness Soft Robot for Underwater Operations

Qin Fang,Jingyu Zhang,Pingyu Xiang,Nenggan Zheng,Yue Wang,Rong Xiong,Zhefeng Gong,Haojian Lu

DOI: https://doi.org/10.1002/aisy.202300688

2024-01-01

Abstract:In the realm of underwater exploration and operations, soft robots exhibit considerable application potential due to their capacity for agile and complex deformations as well as their inherent compliance. These characteristics grant them excellent environmental adaptability and reduce damage to delicate samples and organisms. Nonetheless, existing underwater soft robots are primarily designed to mimic the movements of marine organisms or for specific functions, and little attention is paid to the camouflage ability. To address these challenges, in this study, a reconfigurable transparent soft robot with variable stiffness for underwater operations is presented. The design and fabrication methodology of the robot module is presented, followed by the kinematic analysis and stiffness characterization. Leveraging the proposed robot module, a soft manipulator and a soft gripper are designed for underwater operations. The soft manipulator excels in underwater pipeline detection and obstacle avoidance, while the soft gripper showcases considerable load‐bearing capacity (about 71 times its weight), making it suitable for tasks such as retrieving aquatic biological samples or garbage fishing. The proposed reconfigurable soft robot demonstrates robust camouflage capabilities, high environmental adaptability, and notable versatility, suggesting potential solutions to existing challenges in the field of underwater exploration.
Multi-chamber Pneumatic Actuator for Peristaltic Soft Robot

Sheng Gao,Yue Wang,Rong Xiong,Zhefeng Gong,Nenggan Zheng,Haojian Lu

DOI: https://doi.org/10.1109/rcar52367.2021.9517382

2021-01-01

Abstract:Soft robots have the characteristics of high flexibility and strong environmental adaptability compared with traditional robots, and the peristaltic soft robot is a critical class for this field because of the peristaltic creature's superior softness, various movement, and can through complex space. However, this soft robot has the problem of single motion or limited deformation ability at present. In this paper, a pneumatic corrugated structure driver with a multi-chamber was designed to squirmy soft robots, it can elongation, contraction and turning. We designed the actuator's structure and fabrication of the model. Simultaneously, a set of controller systems is built to control its deformation, we complete the action of forwarding and turning with the actuator on experiments.
Dynamical Characteristics of a Hydraulic Soft Actuator with Three Degrees of Freedom

Qing Xie,Tao Wang,Shiqiang Zhu

DOI: https://doi.org/10.1115/fpmc2021-68734

2021-01-01

Abstract:In recent years, increasing attention and expanding research have been devoted to the study and application of soft actuators. Inherent compliance equips soft actuators with such advantages as incomparable flexibility, good environmental adaptability, safe interaction with the environment, etc. However, the highly nonlinear also bring challenges to modeling of dynamics. This study aims to explore the dynamical characteristics of an underwater hydraulic soft actuator. The actuator has three fiber-reinforced elastomer chambers distributed symmetrically inside. By controlling the pressure in the chambers through a hydraulic power system, the actuator can achieve spatial motion with three degrees of freedom. To describe the relationship between the input pressure combination and the actuator movement, a dynamic model considering the nonlinearity of viscoelastic material is developed based on Lagrangian method and constant curvature hypothesis. A series of experiments are carried out, including single-chamber actuation and multi-chamber actuation. The test results verify the effectiveness and precision of the model. Finally, the effects of the geometrical features on dynamic response are investigated through model-based simulation, which can provide guidance to parameter optimization. The proposed dynamic model can also contribute to behavior analysis, performance prediction, and motion control of the hydraulic soft actuator.
Silicone-layered waterproof electrohydraulic soft actuators for bio-inspired underwater robots

Takumi Shibuya,Shuya Watanabe,Jun Shintake

DOI: https://doi.org/10.3389/frobt.2024.1298624

2024-06-14

Abstract:Electrohydraulic soft actuators are a promising soft actuation technology for constructing bio-inspired underwater robots owing to the features of this technology such as large deformations and forces, fast responses, and high electromechanical efficiencies. However, this actuation technology requires high voltages, thereby limiting the use of these actuators in water and hindering the development of underwater robots. This paper describes a method for creating bio-inspired underwater robots using silicone-layered electrohydraulic soft actuators. The silicone layer functions as an insulator, enabling the application of high voltages underwater. Moreover, bending and linear actuation can be achieved by applying the silicone layers on one or both sides of the actuator. As a proof of concept, bending and linear actuators with planar dimensions of 20 mm × 40 mm (length × width) are fabricated and characterized. Underwater actuation is observed in both types of actuators. The bending actuators exhibit a bending angle and blocked force of 39.0° and 9.6 mN, respectively, at an applied voltage of 10 kV. Further, the linear actuators show a contraction strain and blocked force of 6.6% and 956.1 mN, respectively, at an applied voltage of 10 kV. These actuators are tested at a depth near the surface of water. This ensured that they can operate at least at that depth. The actuators are subsequently used to implement various soft robotic devices such as a ray robot, a fish robot, a water-surface sliding robot, and a gripper. All of the robots exhibit movements as expected; up to 31.2 mm/s (0.91 body length/s) of locomotion speed is achieved by the swimming robots and a retrieve and place task is performed by the gripper. The results obtained in this study indicate the successful implementation of the actuator concept and its high potential for constructing bio-inspired underwater robots and soft robotics applications.
Spring-reinforced pneumatic actuator and soft robotic applications

Boyu Zhang,Xiangming Gu,Jiayuan Liu,Jingyi Kang,Chengquan Hu,Hongen Liao

DOI: https://doi.org/10.1088/1361-665x/ad74bf

IF: 4.1

2024-08-31

Smart Materials and Structures

Abstract:Compared to rigid-structure robots, soft robots possess higher degrees of freedom and stronger environmental adaptability, which has aroused increasing attention in the robotic field. Among them, soft pneumatic robots have excellent performances in various practical applications. However, the nonlinearity and instability of pressure response of soft actuators caused by lateral expansion come to a great challenge. To address this problem, we proposed to embed a spring constraint layer around each single air chamber. Following the design concept, we obtained single-cavity and multi-DoF pneumatic actuators and evaluated their elongation and bending characteristics. Experimental results demonstrated that our proposed actuators have more linear pressure response as well as higher consistency. Eventually, through robotic applications, including soft robotic hand, gripper, and manipulator for minimally invasive surgery (MIS), our proposed actuators could facilitate flexible manipulation and elaborate performance.

materials science, multidisciplinary,instruments & instrumentation
Self-powered soft robot in the Mariana Trench

Guorui Li,Xiangping Chen,Fanghao Zhou,Yiming Liang,Youhua Xiao,Xunuo Cao,Zhen Zhang,Mingqi Zhang,Baosheng Wu,Shunyu Yin,Yi Xu,Hongbo Fan,Zheng Chen,Wei Song,Wenjing Yang,Binbin Pan,Jiaoyi Hou,Weifeng Zou,Shunping He,Xuxu Yang,Guoyong Mao,Zheng Jia,Haofei Zhou,Tiefeng Li,Shaoxing Qu,Zhongbin Xu,Zhilong Huang,Yingwu Luo,Tao Xie,Jason Gu,Shiqiang Zhu,Wei Yang

DOI: https://doi.org/10.1038/s41586-020-03153-z

IF: 64.8

2021-03-03

Nature

Abstract:The deep sea remains the largest unknown territory on Earth because it is so difficult to explore<a href="#ref-CR1">1</a>,<a href="#ref-CR2">2</a>,<a href="#ref-CR3">3</a>,<a href="/articles/s41586-020-03153-z#ref-CR4">4</a>. Owing to the extremely high pressure in the deep sea, rigid vessels<a href="#ref-CR5">5</a>,<a href="#ref-CR6">6</a>,<a href="/articles/s41586-020-03153-z#ref-CR7">7</a> and pressure-compensation systems<a href="#ref-CR8">8</a>,<a href="#ref-CR9">9</a>,<a href="/articles/s41586-020-03153-z#ref-CR10">10</a> are typically required to protect mechatronic systems. However, deep-sea creatures that lack bulky or heavy pressure-tolerant systems can thrive at extreme depths<a href="#ref-CR11">11</a>,<a href="#ref-CR12">12</a>,<a href="#ref-CR13">13</a>,<a href="#ref-CR14">14</a>,<a href="#ref-CR15">15</a>,<a href="#ref-CR16">16</a>,<a href="/articles/s41586-020-03153-z#ref-CR17">17</a>. Here, inspired by the structure of a deep-sea snailfish<a href="/articles/s41586-020-03153-z#ref-CR15">15</a>, we develop an untethered soft robot for deep-sea exploration, with onboard power, control and actuation protected from pressure by integrating electronics in a silicone matrix. This self-powered robot eliminates the requirement for any rigid vessel. To reduce shear stress at the interfaces between electronic components, we decentralize the electronics by increasing the distance between components or separating them from the printed circuit board. Careful design of the dielectric elastomer material used for the robot's flapping fins allowed the robot to be actuated successfully in a field test in the Mariana Trench down to a depth of 10,900 metres and to swim freely in the South China Sea at a depth of 3,224 metres. We validate the pressure resilience of the electronic components and soft actuators through systematic experiments and theoretical analyses. Our work highlights the potential of designing soft, lightweight devices for use in extreme conditions.

multidisciplinary sciences
Pneumatic System Capable of Supplying Programmable Pressure States for Soft Robots

Boyu Zhang,Jiaqi Chen,Xin Ma,Yi Wu,Xinran Zhang,Hongen Liao

DOI: https://doi.org/10.1089/soro.2021.0016

IF: 7.784

2021-12-16

Soft Robotics

Abstract:Pneumatic soft robots are of great interest in varieties of potential applications due to their unique capabilities compared with rigid structures. As a part of the soft robotic system, the pneumatic system plays a very important role as all motion performance is ultimately related to the pressure control in air chambers. With the increasing flexibility and complexity of robotic tasks, diverse pneumatic robots driven by positive, negative, or even hybrid pressure are developed, and this comes with higher requirements of pneumatic system and air pressure control precision. In this study, we aim to propose a simplified pneumatic design capable of generating programmable pressure states ranging from negative to positive pressure in each air branch. Based on the design concept and system configuration, special inflation and deflation strategies and closed-loop feedback control strategy are proposed to achieve precise pressure control. Then, a prototype of the pneumatic system with six independent air supply branches is designed and fabricated. Experimental results show that the pneumatic system can achieve a wide range of pressure from -59 to 112 kPa. The speed of inflation and deflation is controllable. Finally, we demonstrate three robotic applications and design the related algorithms to verify the feasibility and practicability of the pneumatic system. Our proposed pneumatic design can satisfy the pressure control requirements of a variety of soft robots driven by both positive and negative pressure. It can be used as a universal pneumatic platform, which is inspiring for actuation and control in the soft robotic field.

robotics
Design, control, and experiments of a fluidic soft robotic eel

Yihong Chen,Tao Wang,Chaofei Wu,Xiao Wang

DOI: https://doi.org/10.1088/1361-665X/abf5ef

IF: 4.1

2021-01-01

Smart Materials and Structures

Abstract:This work develops a fluidic soft robotic eel which combines the adaptability of soft material and the flexibility of eel-shaped body together. The soft eel-like robot consists of multiple soft actuation segments each of which is capable of bidirectional bending by two embedded symmetrical fluidic chambers. Propulsion will be produced when proper control rules are applied to the bending angles of the actuation segments. Robot design, prototype fabrication and system integration are described step by step. A motion controller based on central pattern generator (CPG) is designed for the soft eel-like robot by using identified parameters. Substantial experiments are implemented to evaluate the performance of the prototype. It is shown that the soft eel-like robot can flexibly perform linear motion and turning motion. Moreover, the soft eel-like robot keeps good continuity even when the parameters of the CPG-based controller changes. In general, the experimental results verify the effectiveness of the design and control methods for the soft eel-like robot, which provides a potential candidate to underwater exploration with limited space.
An Underwater Robotic Manipulator with Soft Bladders and Compact Depth-Independent Actuation

Zhong Shen,Hua Zhong,Erchao Xu,Runzhi Zhang,Ki Chun Yip,Lawrence Long Chan,Leo Lai Chan,Jia Pan,Wenping Wang,Zheng Wang

DOI: https://doi.org/10.1089/soro.2019.0087

IF: 7.784

2020-10-01

Soft Robotics

Abstract:An underwater manipulator is essential for underwater robotic sampling and other service operations. Conventional rigid body underwater manipulators generally required substantial size and weight, leading to hindered general applications. Pioneering soft robotic underwater manipulators have defied this by offering dexterous and lightweight arms and grippers, but still requiring substantial actuation and control components to withstand the water pressure and achieving the desired dynamic performance. In this work, we propose a novel approach to underwater manipulator design and control, exploiting the unique characteristics of soft robots, with a hybrid structure (rigid frame+soft actuator) for improved rigidity and force output, a uniform actuator design allowing one compact hydraulic actuation system to drive all actuators, and a novel fully customizable soft bladder design that improves performances in multiple areas: (1) force output of the actuator is decoupled from the working depth, enabling wide working ranges; (2) all actuators are connected to the main hydraulic line without actuator-specific control loop, resulting in a very compact actuation system especially for high-dexterity cases; (3) dynamic responses were improved significantly compared with the counter system without bladder. A prototype soft manipulator with 4-DOFs, dual bladders, and 15 N payload was developed; the entire system (including actuation, control, and batteries) could be mounted onto a consumer-grade remotely operated vehicle, with depth-independent performances validated by various laboratory and field test results across various climatic and hydrographic conditions. Analytical models and validations of the proposed soft bladder design were also presented as a guideline for other applications.

robotics
Elastic Inflatable Actuators for Soft Robotic Applications

Benjamin Gorissen,Dominiek Reynaerts,Satoshi Konishi,Kazuhiro Yoshida,Joon-Wan Kim,Michael De Volder

DOI: https://doi.org/10.1002/adma.201604977

Abstract:The 20th century's robotic systems have been made from stiff materials, and much of the developments have pursued ever more accurate and dynamic robots, which thrive in industrial automation, and will probably continue to do so for decades to come. However, the 21st century's robotic legacy may very well become that of soft robots. This emerging domain is characterized by continuous soft structures that simultaneously fulfill the role of robotic link and actuator, where prime focus is on design and fabrication of robotic hardware instead of software control. These robots are anticipated to take a prominent role in delicate tasks where classic robots fail, such as in minimally invasive surgery, active prosthetics, and automation tasks involving delicate irregular objects. Central to the development of these robots is the fabrication of soft actuators. This article reviews a particularly attractive type of soft actuators that are driven by pressurized fluids. These actuators have recently gained traction on the one hand due to the technology push from better simulation tools and new manufacturing technologies, and on the other hand by a market pull from applications. This paper provides an overview of the different advanced soft actuator configurations, their design, fabrication, and applications.

Soft active materials and soft robots surviving extremely high hydrostatic pressure

Artificial muscle driven soft hydraulic robot: electromechanical actuation and simplified modeling

REVIEW OF MATERIALS AND STRUCTURES IN SOFT ROBOTICS

Investigation of the State Transition and Moving Boundary in a Pneumatic–Hydraulic Coupled Dielectric Elastomer Actuator

Electromechanical Control and Stability Analysis of A Soft Swim-Bladder Robot Driven by Dielectric Elastomer

Test for the Deep: Magnetic Loading Characterization of Elastomers under Extreme Hydrostatic Pressures

Effects of Extreme Hydrostatic Pressure on the Molecular Structure and Properties of the Elastomeric Material for Soft Robots

Machine-learning-accelerated design of functional structural components in deep-sea soft robots

A Bioinspired Shape Memory Alloy Based Soft Robotic System for Deep‐Sea Exploration

An Experimental Study of Bellows-Type Fluidic Soft Bending Actuators under External Water Pressure

Earthworm‐Inspired Multi‐Material, Adaptive Strain‐Limiting, Hybrid Actuators for Soft Robots

Reconfigurable Transparent Variable‐Stiffness Soft Robot for Underwater Operations

Multi-chamber Pneumatic Actuator for Peristaltic Soft Robot

Dynamical Characteristics of a Hydraulic Soft Actuator with Three Degrees of Freedom

Silicone-layered waterproof electrohydraulic soft actuators for bio-inspired underwater robots

Spring-reinforced pneumatic actuator and soft robotic applications

Self-powered soft robot in the Mariana Trench

Pneumatic System Capable of Supplying Programmable Pressure States for Soft Robots

Design, control, and experiments of a fluidic soft robotic eel

An Underwater Robotic Manipulator with Soft Bladders and Compact Depth-Independent Actuation

Elastic Inflatable Actuators for Soft Robotic Applications