Abstract:Industrial robots have been extensively used in industry, however, geometric errors mainly caused by connecting rod parameter error and non-geometric errors caused by deflection and friction, etc., limit its application in high-accuracy machining. Aiming at addressing these two types of errors, parametric methods for error compensation based on the kinematic model and non-parametric methods of directly establishing the mapping relationship between the actual and target poses of the robot end-effector are investigated and proposed. Currently both types of methods are mainly offline and will be no longer applicable when the pose of the end-effector in the workspace changes dramatically or the working performance of the robot degrades. Thus, to compensate the positioning error of an industrial robot during long-term operation, this research proposes an adaptive hierarchical compensation method based on fixed-length memory window incremental learning and incremental model reconstruction. Firstly, the correlation between positioning errors and robot poses is studied, a calibration sample library is created, and thus the actively evaluating mechanism of the pose mapping model is established to overcome the problem of the robot' workspace having a differential distribution of error levels. Then, an incremental learning algorithm with fixed-length memory window and an incremental model reconstruction algorithm are designed to optimize the pose mapping model in terms of its parameters and architecture and overcome the problem that the performance degradation of the robot exacerbates the positioning error and affects the applicability of the pose mapping model, ensuring that the pose mapping model runs stably above the target accuracy level. Finally, the proposed method is applied to the long-term compensation case of a Stäubli industrial robot and a UR robot, and compared to state-of-art methods. Verification results show the proposed method reduces the position error of the Stäubli robot from 0.85mm to 0.13mm and orientation error from 0.68° to 0.07°, as well as reduces the position error of the UR robot from 2.11mm to 0.17mm, demonstrating that the proposed method works in real world scenarios and outperforms similar methods.

Prediction and Compensation Method of Robot Positioning Error Based on Spatio-temporal Graph Convolution Neural Network

An ANN-Based Precision Compensation Method for Industrial Manipulators Via Optimization of Point Selection

A Method for Predicting Relative Position Errors in Dual-Robot Systems Via Knowledge Transfer from Geometric and Nongeometric Calibration

A Robot Calibration Method Based on Joint Angle Division and an Artificial Neural Network

Robot Positioning Error Compensation Method Based on Deep Neural Network

Multi-Agent Trajectory Prediction Based on Graph Neural Network

A Prediction and Compensation Method of Robot Tracking Error Considering Pose-Dependent Load Decomposition

Intelligent Hierarchical Compensation Method for Industrial Robot Positioning Error Based on Compound Branch Neural Network Automatic Creation

Positioning Error Compensation on Two-Dimensional Manifold for Robotic Machining

Positioning error compensation of an industrial robot using neural networks and experimental study

Robotic Positional Error Calibration Based on a Hybrid Data-driven Prediction Framework

An Online Prediction and Compensation Method for Robot Position Errors Embedded with Error-Motion Correlation

Adaptive Online Compensation for Industrial Robot Positioning Error

Positioning Error Compensation Method for Industrial Robots Based on Stacked Ensemble Learning

Adaptive hierarchical positioning error compensation for long-term service of industrial robots based on incremental learning with fixed-length memory window and incremental model reconstruction

A Model-Data Compound Driven Method for Compensating Robot Tracking Error

An Investigation of Error Compensation for a 6-Dof Industrial Robot Based on Neural Network and Stiffness Modelling

Quantification of Uncertainty in Robot Pose Errors and Calibration of Reliable Compensation Values

Improvement of Heavy Load Robot Positioning Accuracy by Combining a Model-Based Identification for Geometric Parameters and an Optimized Neural Network for the Compensation of Nongeometric Errors

A Positional Error Compensation Method for Industrial Robots Combining Error Similarity and Radial Basis Function Neural Network

Research on BP Neural Network Prediction of Position Error Considering the Variation of Industrial Robot Center of Mass.