Abstract:A novel Rayleigh Doppler lidar technology based on a quadruple dual-pass Fabry–Perot interferometer (FPI) that can accurately measure wind field, temperature and aerosol backscatter ratio from the troposphere to lower stratosphere is proposed. This study aims to analyse the detection principle of wind speed, temperature and aerosol backscatter ratio in detail and obtain their measurement error formulas. The structure of this type of lidar is studied and designed. The FPI consists of two edge channels FPI-1 and FPI-2, aerosol channel FPI-M and locking channel FPI-L. FPI-1, FPI-2 and FPI-M use a dual-pass optical path, whereas FPI-L uses a single-pass optical path. The parameters of FPI are optimised as follows: the free spectral spacing (FSR) is 12 GHz, the FWHM of FPI-1 and FPI-2 are both 2.2 GHz, the peak-to-peak interval of FPI-1 and FPI-2 is 5.8 GHz, the FWHM of FPI-M and FPI-L are both 1.2 GHz, the peak-to-peak interval of FPI-M and FPI-1 is 2.9 GHz and the peak-to-peak interval of FPI-L and FPI-1 is 2.3 GHz. Under simulated atmospheric conditions, for a daytime sky background brightness of 0.3 Wsr −1 m −2 nm −1 at 355 nm, using a laser with a pulse energy of 350 mJ and a repetition frequency of 50 Hz and a telescope with a 0.45-m aperture, with a vertical range resolution of 30 m at 0–10 km, 100 m at 10–20 km and 500 m at 20–35km, temporal resolution of 30 min, zenith angle of 0° for temperature and aerosol backscatter ratio detection and temporal resolution of 3 min and zenith angle of 30° for radial wind speed detection, the detection performance of the designed Rayleigh Doppler lidar is determined. The simulation results show that the measurement errors of aerosol backscatter ratio, temperature and radial wind speed of the lidar system in the daytime and night-time are less than 4.36 × 10 −3 and 3.32 × 10 −3 (excluding cirrus cloud area), 4.0 K and 3.0 K and 3.8 m/s and 1.9 m/s, respectively, from an altitude of 0.06 to 35km.

Simulation and Optimization of Fe Resonance Fluorescence Lidar Performance for Temperature-Wind Measurement.

A Spectroscopic Transmittance Analytical Modeling for Field-Widened Michelson Interferometer Employed by High Spectral Resolution Lidars

Simulation of wind-temperature-density measurement in near space by spaceborne Fe resonance fluorescence Doppler lidar

Field-widened Michelson Interferometer for Spectral Discrimination in High-Spectral-resolution Lidar: Theoretical Framework.

Design and Simulation of 532nm Rayleigh-Mie Doppler Wind Lidar System

Design and performance simulation of 532 nm Rayleigh–Mie Doppler lidar system for 5–50 km wind measurement

Optimization of scanning Fabry–Perot interferometer in the high spectral resolution lidar for stratospheric temperature detection

Design of a Three-Frequency Rayleigh Lidar for Simultaneous Temperature and Wind Measurements

Quad-Fabry-Perot etalon based Rayleigh Doppler lidar for 0.2-60km altitude wind, temperature and aerosol accurate measurement

Development of a Raman Temperature LiDAR with Low Energy and Small Aperture by Parameter Optimization

Simulation of a Pulsed Metastable Helium Lidar

A Rotary Platform Mounted Doppler Lidar for Wind Measurements in Upper Troposphere and Stratosphere

Numerical Simulation of 1.55 um Coherent Lidar for Wind Measurement

Simulation of ground-based Fabry-Perot interferometer for the measurement of upper atmospheric winds

Mobile Rayleigh Doppler lidar for wind and temperature measurements in the stratosphere and lower mesosphere

Design of a Data Acquisition, Correction and Retrieval of Na Doppler Lidar for Diurnal Measurement of Temperature and Wind in the Mesosphere and Lower Thermosphere Region

Feasibility Study of Water Vapor and Temperature Retrieval Using A Combined Vibrational Rotational Raman and Mie Scattering Multi-Wavelength Lidar

Methods for optical adjustment in lidar systems

Development and Experimental Testing of a Rotary Direct Wind Lidar System Based on Fabry.Perot Interferometer Technology-=SUP=-*-=/SUP=-

Development of 60 Km Mobile Rayleigh Wind Lidar

Rayleigh Doppler Lidar Technology Based on a Quadruple Dual-pass Fabry–Perot Interferometer