Abstract:Alkanes and their mixtures (paraffins) have widely been used as phase change materials (PCMs) for low-to-medium temperature thermal energy storage. Among the various alkanes, eicosane, with a nominal melting temperature of 37 degrees C, has emerged in energy-storage-based passive thermal management technologies, for electronics for example. In an effort to increase the thermal conductivity of eicosane, the effect of adding graphene nanoplatelets (GNPs) as thermally conductive nanofillers was investigated experimentally. The composite PCM samples were prepared by dispersing GNPs in liquid eicosane at various loadings (0, 1, 2, 5, and 10 wt.%) without any surfactants. Thermal conductivity of the composite PCM samples in their solid phase was then measured by means of the transient plane source technique at elevated temperatures from 10 to 35 degrees C. Latent heat of fusion and melting point of the samples were also characterized using a differential scanning calorimeter. It was shown that for the highest loading examined (10 wt.%), the relative thermal conductivity enhancement is above 400% at 10 degrees C, indicating that the emerging GNPs have much better performance than the conventional nanofillers attempted in the available literature, such as metal/oxide nanoparticles and carbon nanotubes. Reduced thermal interface resistance, related to the unique two-dimensional planar morphology of GNPs, was interpreted to be responsible for their superior performance. The matrix/filler thermal interface resistance was estimated to range from 6 x 10(-9) to 9 x 10(-9) m(2) K/W. In contrast to the markedly increased thermal conductivity, however, the penalty of decrease in the energy storage capacity, caused by the presence of GNPs, was shown to be less significant.

High-thermal-conductivity phase-change composites prepared by in situ synthesis of graphite Nanoplatelets/Cu networks for effective thermal management

Phase Change Materials of Paraffin in H-Bn Porous Scaffolds with Enhanced Thermal Conductivity and Form Stability

Thermal Energy Storage Performance of Paraffin-Based Composite Phase Change Materials Filled with Hexagonal Boron Nitride Nanosheets

Large-scale preparation of leakage-proof phase change composites with compressed enhanced thermally conductive network for efficient thermal management

High thermal conductivity of porous graphite/paraffin composite phase change material with 3D porous graphite foam

Phase change composites with ultra-high through-plane thermal conductivity achieved by vertically-aligned graphite film and double-shelled microcapsules

Dual‐Encapsulated Highly Conductive and Liquid‐Free Phase Change Composites Enabled by Polyurethane/Graphite Nanoplatelets Hybrid Networks for Efficient Energy Storage and Thermal Management

Increased Thermal Conductivity of Eicosane-Based Composite Phase Change Materials in the Presence of Graphene Nanoplatelets

Polyethylene Glycol/polyvinyl Butyral/graphene Nanoplates As Composite Phase-Change Materials with High Thermal Conductivity

Improved thermal properties of phase change composites reinforced by Cu nanoparticles modified anisotropic carbon rolls

Unidirectional thermal conduction in electrically insulating phase change composites for superior power output of thermoelectric generators

3D printing, leakage-proof, and flexible phase change composites for thermal management application

Enhancement of thermal properties of phase change composites by copper film-coated carbon fiber felt

Enhancing the solar absorption capacity of expanded graphite-paraffin wax composite phase change materials by introducing carbon nanotubes additives

Synchronously improved thermal conductivity and anti-leakage performance for phase change composite by SiC nanowires modified wood carbon

Thermal-Conductivity-Enhancing Copper-Plated Expanded Graphite/Paraffin Composite for Highly Stable Phase-Change Materials

Efficient preparation of polydimethylsiloxane-based phase change composites by forced network assembly with outstanding thermal management capability

Paraffin@SiO2 Microcapsules-Based Phase Change Composites with Enhanced Thermal Conductivity for Passive Battery Cooling

Highly thermal conductive Graphene/Paraffin composite for efficient thermal management of electronics

A graphene nanoflake-based flexible composite phase change material for enhanced heat dissipation in chip cooling

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials