Abstract:Beam -to -column joints in seismic moment frames would directly influence the behaviours of the connected members. When reinforced joint configurations were adopted to shift plastic hinges away from the field welds, columns in seismic steel frames would suffer larger inner forces and should be specially checked to control yielding mechanics. However, there were only few investigations on reinforced joints with typically -designed columns in multi -story frames, which limited the comprehensive evaluation of seismic beam -to -column joints especially for the reinforced joint configurations. In this investigation, the seismic behaviours of the cover -plate joint and the flange -plate joint, which are collectively referred to as plate -reinforced joints, were evaluated experimentally. Tests of four double -sided plate -reinforced joint specimens, taken from prototype seismic steel frames that were typically designed and checked by the Chinese code, were conducted under anti -symmetrical cyclic loads on the beam ends with axial forces in the columns. The test results were analysed to consider the seismic performances of the connections and members in the plate -reinforced joints, summarizing the char- acteristics of the failure modes, the resistance and the ductility. Specially, the seismic behaviour of the middle column with axial force, as well as the panel zone, was analysed. According to the test results, the flange -plate joints were more sensitive to the quality of the field complete -joint -penetration welds between the reinforcing plates and the column flanges than the cover -plate joints. The middle columns in typically -designed seismic frames by the Chinese code may not guarantee satisfactory seismic performances in the joint regions, and the panel zone that was designed based on the Chinese code might not allow the beam section to reach the plastic moment although it could effectively contribute to the joint deformability. Based on this study, practical re- commendations for seismic design of connections and members in plate -reinforced joints were proposed.

Experimental and Numerical Study on Seismic Behaviour of Aluminium Alloy Frames

Experimental study on seismic behavior of assembled steel beam-PC column composite frames

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Numerical Studies on Full-Scale Steel Columns under Complex Seismic Loading

Self-centering Eccentrically Braced Frames Using Shape Memory Alloy Bolts and Post-Tensioned Tendons

Seismic Behavior of Pc Column and Steel Beam Composite Moment Frame with Posttensioned Connection

Analytical Study On Buckling Restrained Braced Composite Frames

Structural performance of novel aluminium alloy gusset joints for connecting four I-section beam members

Engineering applications and research progress of low-rise aluminum alloy frames

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Seismic Behavior of Steel Reinforced Ultra-High Strength Concrete Composite Frame: Experimental and Numerical Study

Study of the Mechanical Properties of Beam-Column Joints in a New Type of Aluminum Alloy Portal Frame

Finite Element Analysis On The Seismic Behavior Of High Strength Steel Frames

Experimental Study on Seismic Behavior of Beijing Goldfield Center Irregular RC Frame Models

Experimental study on seismic behavior of prefabricated RC frame joints with T-shaped columns

Mechanical performance and design of aluminium alloy beam string structures

Experimental Study on Seismic Behavior of High Strength Steel Frames: Local Response

STUDIES ON THE ASEISMIC PERFORMANCE OF HIGH RISE STEEL STRUCTURES WITH NEW BEAM-COLUMN JOINTS DISSIPATING SEISMIC ENERGY

Analysis of Seismic Behaviour of Welded Steel Connections and Frames with Differently Constructed Connections

Experimental Study on Seismic Behaviour of Cover-Plate Joints in High Strength Steel Frames

Experimental Study on Typically Designed Double -Sided Plate -Reinforced Joints with Middle Columns