Abstract:The sealing capacity of magnetofluidic (MF) rotating seals is limited by the highest magnetization of the sealing ferrofluids (FFs) of about 1000 G (80 kA m-1). A sharp, almost an order of magnitude, increase in the supported pressure drop is possible by using a magnetorheological (MR) suspension as sealing fluid, owing to the much higher saturation magnetization of MR fluids compared to FFs. However, rotating seals with MR fluids have several shortcomings, such as a significant increase of the friction torque due to the growth of shear stress in the strong magnetic field specific to MF seals and leakage of the non-magnetic carrier liquid. At least partly, these issues can be avoided by using ferrofluid based extremely bidisperse MR suspensions of micrometer-sized iron (Fe) particles dispersed in a ferrofluid, as sealing fluid. The composite Fe3O4-Fe magnetic fluid used in this study consisted of hundreds of nanometers up to few microns size structures of interconnected (welded) Fe nanoparticles (FeMNPs) dispersed in a high colloidal stability ferrofluid with 500 G (40 kA m-1) saturation magnetization. The volume fraction of iron NPs varies from 0.5 to 15% in the ferrofluid carrier which significantly increases the magnetization and simultaneously produces important changes of flow properties in magnetic field of the resulting composite fluid, from Newtonian to strongly non-Newtonian behavior. The evaluation of the magnetic and magnetorheological behavior includes the dependence of magnetization, effective viscosity, magnetoviscous effect and dynamic yield stress on the volume fraction of Fe nanoparticles dispersed in the ferrofluid carrier. The seal gap filled with interconnected Fe nanospheres consists in randomly distributed microregions with a high intensity and high gradient magnetic field that captures the ferrofluid and provides a new sealing mechanism. Already a small amount of interconnected Fe nanospheres additive (2.5-5.0% volume fraction) produces four times increase of the rotating seal burst pressure, a much higher increase than what can be obtained from using a conventional magnetic fluid with the same magnetization. The nano-composite sealing magnetic fluid proved to be a cost-effective solution to significantly increase the performance of multi-stage rotating MF seals.

Temperature Rise of Magnetorheological Fluid Sealing Film in a Spiral Grooved Mechanical

The Influence of the Temperature Rise on the Sealing Performance of the Rotating Magnetic Fluid Seal

Coupled Heat Transfer Characteristics in a Spiral Groove Mechanical Seal Lubricated by Magnetic Fluid

Study on the Effect of Magnetorheological Fluids (mrfs) on the Sealing Performance

Comparative study of the sealing mechanism and performance between magnetic fluid and magnetorheological fluid seals

Research on the mechanical properties of magnetorheological fluid under electromagnetic-thermal coupling

Experimental Study on the Hydrodynamic Lubrication Characteristics of Magnetofluid Film in a Spiral Groove Mechanical Seal

Calculation of the Maximum Temperature of Diester-Based Magnetic Fluid Layers in High-Speed Seals

Influence of temperature on the sealing mechanism and sealing performance for magnetic fluid seal with opposite pole teeth in different environments

Sealing performance in a spiral groove mechanical seal lubricated by magnetic fluid

Modification of Magnetorheological Fluid and Its Compatibility with Metal Skeleton: Insights from Multi-Body Dissipative Particle Dynamics Simulations and Experimental Study

Research on the wear characteristics of magnetorheological fluid in sealing interface considering the interaction between surface roughness and magnetic particles

Frictional Heat Transfer Regularity of the Fluid Film in Mechanical Seals

Modeling of the Temperature Effects on Magnetorheological Fluids over a Wide Temperature Range Based on Free Volume Theory

Micro-phenomenon and Viscosity Features of Magnetorheological Fluids at External Field

The Influence of the Thermal Expansion on the Magnetic Fluid Sealing Performance

Experimental study of surface roughness on improving the tribological performance of sealing pairs in magnetorheological damper

High magnetization composite magnetic fluid: structure, magnetorheology and new sealing mechanism in rotating seals

Influence of Viscosity and Magnetoviscous Effect on the Performance of a Magnetic Fluid Seal in a Water Environment

Thermal analysis of a miniature magnetic fluid seal installed in an implantable rotary pump

Theory Analyses and Experimental Study on Starting Torque and Seal Capacity of Field-Control Magnetic Fluid Seal