Abstract:Purpose The main purpose of this paper is to investigate the effects of icing on unmanned aerial vehicles (UAVs) at low Reynolds numbers and to highlight the differences to icing on manned aircraft at high Reynolds numbers. This paper follows existing research on low Reynolds number effects on ice accretion. This study extends the focus to how variations of airspeed and chord length affect the ice accretions, and aerodynamic performance degradation is investigated. Design/methodology/approach A parametric study with independent variations of airspeed and chord lengths was conducted on a typical UAV airfoil (RG-15) using icing computational fluid dynamic methods. FENSAP-ICE was used to simulate ice shapes and aerodynamic performance penalties. Validation was performed with two experimental ice shapes obtained from a low-speed icing wind tunnel. Three meteorological conditions were chosen to represent the icing typologies of rime, glaze and mixed ice. A parameter study with different chord lengths and airspeeds was then conducted for rime, glaze and mixed icing conditions. Findings The simulation results showed that the effect of airspeed variation depended on the ice accretion regime. For rime, it led to a minor increase in ice accretion. For mixed and glaze, the impact on ice geometry and penalties was substantially larger. The variation of chord length had a substantial impact on relative ice thicknesses, ice area, ice limits and performance degradation, independent from the icing regime. Research limitations/implications The implications of this manuscript are relevant for highlighting the differences between icing on manned and unmanned aircraft. Unmanned aircraft are typically smaller and fly slower than manned aircraft. Although previous research has documented the influence of this on the ice accretions, this paper investigates the effect on aerodynamic performance degradation. The findings in this work show that UAVs are more sensitive to icing conditions compared to larger and faster manned aircraft. By consequence, icing conditions are more severe for UAVs. Practical implications Atmospheric in-flight icing is a severe risk for fixed-wing UAVs and significantly limits their operational envelope. As UAVs are typically smaller and operate at lower airspeeds compared to manned aircraft, it is important to understand how the differences in airspeed and size affect ice accretion and aerodynamic performance penalties. Originality/value Earlier work has described the effect of Reynolds number variations on the ice accretion characteristics for UAVs. This work is expanding on those findings by investigating the effect of airspeed and chord length on ice accretion shapes separately. In addition, this study also investigates how these parameters affect aerodynamic performance penalties (lift, drag and stall).

Optimization Design of Airfoils under Atmospheric Icing Conditions for UAV

Optimization of Multi-Element Airfoil Settings Considering Ice Accretion Effect

Improving flight performance of UAVs by ice shape modulation

Aerodynamic Prediction of Iced Airfoils Based on Modified Three-Equation Turbulence Model

Impact of atmospheric icing on UAV aerodynamic performance

Data-integrated uncertainty quantification for the performance prediction of iced airfoils

Investigation of airflow thermal ice melting process under various flight conditions

Aerodynamic prediction and roughness implementation toward ice accretion simulation

Unsteady aerodynamic prediction for iced airfoil based on Multi-Task Learning

Large-Sized Multirotor Design: Accurate Modeling with Aerodynamics and Optimization for Rotor Tilt Angle

A Parametric Design Method for Hybrid Airfoils for Icing Wind Tunnel Test

Design optimization of a blunt trailing-edge airfoil for wind turbines under rime ice conditions

The Impact of Icing on the Airfoil on the Lift-Drag Characteristics and Maneuverability Characteristics

UAV icing: the influence of airspeed and chord length on performance degradation

Optimal Design of Anti-icing Blunt Trailing-edge Wind Wheel for H-type Vertical Axis Wind Turbine under Operating Conditions

Numerical simulation of icing effect on aerodynamic characteristics of a wind turbine blade

Computational fluid dynamics analysis of aerodynamic characteristics in long-endurance unmanned aerial vehicles

A Study of Multi-Objective Aerodynamic Optimization Design for Variable Camber Airfoils and High Lift Devices

Modeling of iced rotor dynamics via CFD/CSD coupling

Influence of Air Flow Field Computation on an Ice Accretion Simulation of Airfoils

Numerical Simulation of Iced Wing Using Separating Shear Layer Fixed Turbulence Models