Draft of PRSTAB paper ELECTRICAL BREAKDOWN OF METALLIC SURFACES
Mahzad BastaniNejad,Abdelmageed Elmustafa,Mohammad Alsharo,Charles M. Ankenbrandt,Pierrick Hanlet,Rolland P. Johnson,Moyses Kuchnir,Michael Neubauer,David Newsham,Richard Sah,Alfred Moretti,Milorad Popovic,Alvin Tollestrup,Katsuya Yonehara,Daniel M. Kaplan,Derun Li,John Byrd,D. V. Rose,C. Thoma,D. R. Welch
2008-01-01
Abstract:An 805 MHz test cell that was originally designed to study the use of RF cavities pressurized with dense hydrogen gas for ionization cooling of muon beams has been used to study the electrical breakdown mechanisms of metallic surfaces. In these studies, the dense hydrogen gas absorbs dark currents and eliminates multipacting, which can complicate the understanding of breakdown in evacuated RF cavities. The measured distributions of the remnants of sparks on the surfaces of the test cell electrodes show that the breakdown probability depends strongly on electrical field in a way that is expected from Fowler-Nordheim field emission. These data and that the maximum sustainable RF gradient increases with the melting temperature of the Cu, Be, Mo, and W electrodes argue for a simple model of electrical breakdown. Namely, any source of field emission on a metallic surface exposed to an electric field will cause a large current to flow through the metal under the source. Ohmic heating will then cause the metal temperature to increase, leading to increased resistance, more heating, and a runaway situation. As its strength is reduced as the metal heats, surface distortions may exacerbate the electron emission. Finally, the metal boils and vaporized metal in the gap effectively shorts the cavity out. Conditioning of the surface occurs as the emission sources (e.g. dust, asperites, inclusions, or regions of low work function) are destroyed by heat or are physically dislodged from the surface.