Abstract:This study aims to demonstrate the general carbocatalytic conversion behaviors and reaction mechanisms of representative biomass-derived primary pyrolytic products towards product upgradation. Specifically, 4-Ethylguaiacol (4-EGC) and 5-hydroxymethylfurfural (5-HMF) were selected as lignin- and cellulose/hemicellulose-derived model compound, respectively, to elucidate the origin of products under different temperatures and biochar-reactant mixing ratios. Three reaction routes were distinguished, including side-chain elimination, ring opening and recombination, with each route exhibiting unique characteristics in terms of initiation temperature and selectivity. For 4-EGC, elimination of side-chains began at 500 °C, accompanied by alkyl transfer reactions to generate multi-alkyl-substituted phenols, while ring-opening started at 700 °C, and aromatics could be simultaneously produced. Biochar did not change the initiation temperature of each route but significantly influenced the product distribution. Comparing the biochar-reactant mixing ratio of 0 and 10:1, at 600 °C the selectivity towards phenols increased from 20.52 % to 54.98 %, and at 800 °C the selectivity towards aromatics increased from 14.28 % to 53.01 %. For 5-HMF, the elimination of side chains already began at 400 °C, and the ring-opening started at around 600 °C, but recombination products (phenols and aromatics) would not notably emerge until 700 °C. Biochar could both lower the initiation temperature of each reaction route and change the conversion efficiency for 5-HMF owing to the lower stability of furan ring. However, the impact of biochar on selectivity towards aromatics was less pronounced compared to 4-EGC. Even at 800 °C, the relative content of aromatics only reached 28.88 % with a biochar-reactant mixing ratio of 10:1 for 5-HMF. Comparative investigations on biochar structure before and after co-pyrolysis reactions further revealed that, at 600 °C, biochar maintained its structural integrity, but at 800 °C, it underwent significant changes, including amorphous carbon deposition covering the surface. Raman spectra analysis supported these findings, showing that biochar becomes more amorphous after reactions at 600 °C, while at 800 °C, larger aromatic ring systems form on the biochar, reducing defect sites.

The Fuel Properties and Adsorption Capacities of Torrefied Camellia Shell Obtained Via Different Steam-Torrefaction Reactors

Torrefaction performance of camellia shell under pyrolysis gas atmosphere

Properties, kinetics and pyrolysis products distribution of oxidative torrefied camellia shell in different oxygen concentration

The Carbon Stability and Energy Characteristics of Tea Waste-Derived Biochar: Effects of Pyrolytic Temperature and Co-Pyrolysis with Nanoscale Zero-Valent Iron

Performance of biochar as a catalyst for tar steam reforming: Effect of the porous structure

Experimental study of torrefaction of camellia seed shell for solid fuel production in the context of a carbon neutrality roadmap

Effect of wet torrefaction on the physicochemical characteristics and gasification behavior of biochar

Thermogravimetric, thermochemical, and infrared spectral characterization of feedstocks and biochar derived at different pyrolysis temperatures

Effect of steam on coke deposition during the tar reforming from corn straw pyrolysis over biochar

Co-pyrolysis characteristics of camellia oleifera shell and coal in a TGA and a fixed-bed reactor

Evaluation of the catalytic performance of different activated biochar catalysts for removal of tar from biomass pyrolysis

Characterization of Energy Carriers Obtained from the Pyrolysis of White Ash, Switchgrass and Corn Stover — Biochar, Syngas and Bio-Oil

Co-production of Biochar, Bio-oil, and Syngas from Tamarix Chinensis Biomass under Three Different Pyrolysis Temperatures

Analytical Py-GC/MS study on conversion behaviors and reaction mechanism of biochar-mediated catalytic upgradation of primary pyrolytic products from lignocellulosic biomass

In-depth Comparison of the Physicochemical Characteristics of Bio-Char Derived from Biomass Pseudo Components: Hemicellulose, Cellulose, and Lignin

Effect of Torrefaction on the Physiochemical Characteristics and Pyrolysis of the Corn Stalk

Kinetic and thermodynamic analysis of biomass catalytic pyrolysis with nascent biochar in a two-stage reactor

Optimization of Vertical Fixed-Bed Pyrolysis for Enhanced Biochar Production from Diverse Agricultural Residues

In-situ Steam Reforming of Biomass Tar over Sawdust Biochar in Mild Catalytic Temperature

Effects of wet torrefaction on physicochemical properties of dark tea residue and pyrolysis products

Optimization of Operating Parameters for Tar Reforming/hydrogen Upgrading in Corn Straw Pyrolysis Polygeneration