Abstract:The normal vector of migration direction in the solid-liquid interface of dendrites was used to describe the phase-field governing equation. By using the three angles formed by the normal vector for the migration direction of the dendritic growth interface and the coordinate axes of the simulation region, the authors expressed the interfacial anisotropy equation, and built a phase-field model for the competitive growth of multiple grains. Taking a Al-2%mole-Cu binary alloy as an example, the competitive growth of multiple grains during isothermal solidification was simulated by applying parallel computing techniques. In addition, the phase field simulation results were verified by the experimental method. The simulation results show that the competitive growth of equiaxed dendrite is divided into two types: the first occurs during the process of competitive growth, the tips of primary dendrite on different grains taking part in the competition stop growing in their optimal growth direction; the second also occurs during competitive growth, the tips of primary dendrite which participate in the competition on different grains never stop growing in their optimal growth direction. The dendritic morphologies of the first competition growth type are divided into two types. Primary dendrites of grains taking part in the competition stop growing in their optimal growth direction and the competition plane enlarges when neither one wins the competition. However, when one wins the competition, the primary dendrites of grains with superiority go through the blocking grains and continue to grow in their optimal growth direction. The primary dendrites of inferior grains stop growing in their optimal growth direction and then instead grow in those areas without obstacles. The dendritic morphology of the second competition-growth type is shown to be the deformation of primary dendrites, which are mainly represented as the deflection and bending observed from different views. Compared with the metallographic picture, the simulation results can show the morphology of the competitive growth in all directions, so this simulation method can better characterize the competitive growth process.

Effect of Concentration-Gradient on Characteristic Parameters of Α-Al Dendrites in Al-Cu Alloy

Effect of Material Parameters on Dendritic Patterns of Ni-Cu Binary Alloy Using Phase-Field Simulation

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Phase-field Numerical Simulation of Three-Dimensional Competitive Growth of Dendrites in a Binary Alloy

Effect of cooling rates on dendrite spacings of directionally solidified DZ125 alloy under high thermal gradient

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Experimental and simulation of primary dendrite spacing in directional solidification of Al-7Si-0.36Mg alloy

Phase Field Simulation of Dendrite Growth in Binary Ni–Cu Alloy under the Applied Temperature Gradient

Simulation of the Dendrite Morphology and Microsegregation in Solidification of Al–Cu–Mg Aluminum Alloys

Equiaxed dendritic growth in nearly isothermal conditions: A study combining in situ and real-time experiment with large-scale phase-field simulation

Influence of directional solidification variables on the microstructure and crystal orientation of AM3 under high thermal gradient

In Situ Observation of Multi-Grain Competitive Growth in Al-20wt.%Cu and Establishment of Converging-Case Dendrite Elimination Model

Diffusion-convection Effects on Constrained Dendritic Growth in Dilute Alloys

The Effect of Low Cooling Rates on Dendrite Morphology During Directional Solidification in Mg–Gd Alloys: in Situ X-ray Radiographic Observation

Effect of Growth Rate on Characteristic Lengths of Microstructure in Directionally Solidified Ti-46al-2cr-2nb-0.2b Alloy

Research of Dendrite/Cellular Interfacial Transitional Velocity in Directionally Solidified Al-4%Cu Alloy

Primary Cellular/Dendritic Spacing Selection of Al-4.95% Zn Alloy under Near-Rapid Directional Solidification Condition

Modeling Dendrite Coarsening and Remelting during Directional Solidification of Al-06wt.%Cu Alloy

Coupling in Situ Synchrotron X-ray Radiography and Phase-Field Simulation to Study the Effect of Low Cooling Rates on Dendrite Morphology During Directional Solidification in Mg–Gd Alloys

Simulation of Primary Dendrite Competitive Growth and Solute Concentration Distribution in Directional Solidification DZ125 Superalloy

Numerical simulation of cellular/dendrite transition and its growth during directional solidification of Ti44Al alloy