Abstract:In order to enhance the utilization of alkaline carbide slag (CS) and steel slag (SS) in solid waste-based cementitious materials (SWBCM). In this study, slag (GGBS) was utilized as the primary material, phosphogypsum (PG) as the sulfat activator, and carbide slag (CS) and steel slag (SS) as the alkali activators to prepare carbide slag-steel slag-slag-phosphogypsum composite cementitious material (CS-SS-GGBS-PG). The impact of partial SS (mass fraction) substitution by CS on the flowability, mechanical properties, softening coefficient, pore solution pH value, hydration heat, and microstructure of CS-SS-GGBS-PG was studied. The hydration products, microstructure, and pore structure of CS-SS-GGBS-PG were studied via XRD, FTIR, TG-DTG, SEM, and MIP. The results show that CS replacement with SS decreases the flowability of CS-SS-GGBS-PG compared to the specimen without CS doping (A0). The addition of CS provides an abundance of Ca 2+ and OH − to facilitate the hydration reaction in the system, prompting CS-SS-GGBS-PG to form more C-(A)-S-H gels and ettringite (AFt) in the early stages. This significantly enhances the 3 and 7 days strength of CS-SS-GGBS-PG. Compared to A0, the sample group with 5% CS substitution for SS showed a respective increase of 400% and 1,150% in flexural strength at 3 and 7 days, and an increase of 800% and 1,633% in compressive strength. However, if CS is substituted for SS in excess, the system’s late hydration process will be inhibited, increasing the volume of harmful pores in the specimen’s microstructure and lowering its degree of compactness. This leads to a decrease of 28 days of strength and a deterioration of the water resistance of CS-SS-GGBS-PG. It is advised that the blending ratio of SS to CS be 3:1 in order to maintain equilibrium between the early strength enhancement of CS-SS-GGBS-PG and the stability of strength and water resistance in the latter stage. This study has a positive impact on improving the utilization of CS and SS in SWBCM, reducing the dependence of SWBCM on traditional high-angstrom chemical alkali activators, and promoting the development of SWBCM.

Stabilization of Dredged Sediment Using Activated Binary Cement Incorporating Nanoparticles

High-efficiency Stabilization of Dredged Sediment Using Nano-Modified and Chemical-Activated Binary Cement

Utilization of lime/carbide slag-activated ground granulated blast-furnace slag for dredged sludge stabilization

Strength evolutions of varying water content-dredged sludge stabilized with alkali-activated ground granulated blast-furnace slag

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Research on Alkali-Activated Slag Stabilization of Dredged Silt Based on a Response Surface Method

Investigation on the strength, durability and swelling of cement- solidified dredged sludge admixed fly ash and nano-SiO2

Effect of Calcium Carbide Residue on Strength Development along with Mechanisms of Cement-Stabilized Dredged Sludge

Strength properties of dredged soil at high water content treated with soda residue, carbide slag, and ground granulated blast furnace slag

Effect of nano-modification and fiber-reinforcement on mechanical behavior of cement-stabilized dredged sediment

Stabilization of dredged clays with ternary alkali-activated materials: Towards sustainable solid wastes recycling

Alkali-Activated Ground-Granulated Blast Furnace Slag for Stabilization of Marine Soft Clay

Investigation on Performance Improvement of Dredged Sediment with High Water Content Stabilized with Alkali-Activated Materials

Effectiveness of Waste Steel Slag Powder on the Strength Development and Associated Micro-Mechanisms of Cement-Stabilized Dredged Sludge

Preparation and Characterization of Low-Carbon Cementitious Materials Based on Soda-Residue-Activated Ground Granulated Blast-Furnace Slag: A Case Study on Cemented Paste Backfills

Effect of carbide slag and steel slag as alkali activators on the key properties of carbide slag-steel slag-slag-phosphogypsum composite cementitious materials

Carbide slag–activated ground granulated blastfurnace slag for soft clay stabilization

Strength Properties of Cement-Stabilized Dredged Sludge Incorporating Nano-SiO2 and Straw Fiber

Dredged marine sediments stabilized/solidified with cement and GGBS: Factors affecting mechanical behaviour and leachability

Efficient stabilization of dredged sludge with high water content using an improved bio-carbonation of reactive magnesia cement method

Strength development of dredged sludge with different sodium hydroxide contents