DFT Study of the Reaction Mechanism of CuO–char in Chemical-Looping Combustion

Deng Zhao,Hui Liu,Di Zhu,Huashan Wang,Pengcheng Lu,Ming Qin

DOI: https://doi.org/10.1039/d1se01160j

IF: 6.813

2021-01-01

Sustainable Energy & Fuels

Abstract:In the CuO–char mechanism of chemical-looping combustion, direct solid–solid reaction is more favorable than oxygen decoupling.

What problem does this paper attempt to address?

Effects of Electric Field on Chemical Looping Combustion: A DFT Study of CO Oxidation on CuO (111) Surface

Zhongze Bai,Xi Zhuo Jiang,Kai H. Luo

DOI: https://doi.org/10.1021/acsomega.4c00743

IF: 4.1

2024-05-21

ACS Omega

Abstract:Chemical looping combustion (CLC) is a promising and novel technology for carbon dioxide (CO(2)) capture with a relatively low energy consumption and cost. CuO, one of the most attractive oxygen carriers (OCs) for carbon dioxide (CO) oxidation, suffers from sintering and agglomeration during the reduction process. Applying an electric field (EF) may promote the CO oxidation process on the CuO surface, which could mitigate sintering and agglomeration by decreasing operating temperatures with...

chemistry, multidisciplinary
Unraveling the Structure–Reactivity Relationship of CuFe2O4 Oxygen Carriers for Chemical Looping Combustion: A DFT Study

Zhipeng Li,Hongjian Tang,Zhenkun Sun,Chao Chen,Lunbo Duan

DOI: https://doi.org/10.1021/acs.energyfuels.3c01101

IF: 4.6541

2023-01-01

Energy & Fuels

Abstract:CuFe2O4 is an emerging high-performanceoxygencarrier for chemical looping combustion (CLC), which is hailed asthe most promising technology to reduce combustion-derived CO2 emission. CuFe2O4 oxygen carriers withminute structural differences could be largely divergent in the reactivityfor the CLC process, which seems not to raise much concern by eitherexperimental or computational studies. Herein, based on density functionaltheory (DFT) calculations, we compare the performance of three well-documentedCuFe(2)O(4) configurations as oxygen carriers inthe CLC process and relate the reactivity difference to their structuralnuances. The reaction mechanisms of representative CLC reactants (i.e.,CH4, H-2, and CO) over different CuFe2O4 configurations are explored in-depth. DFT calculationsindicate that among different CuFe2O4 configurations,the distribution, orientation, and activity of the O/Cu/Fe sites varylargely over the respective CuFe2O4(100) surfaces,thus affecting the adsorption and oxidation of CLC reactants. Fe atoms,especially in configuration 3, are observed to exhibit a higher degreeof exposure and afford lower steric hindrance to interact with CH4 and H-2, thereby facilitating higher adsorptionenergies and lower dissociation energy barriers correspondingly. TheFe-Cu synergistic effect is revealed to promote the dissociationreaction of both CH4 and H-2. CO exhibits directoxidation to CO2 over the O sites, which generally exhibithigher CO binding energies than Cu/Fe sites. Particularly, O sitesin configuration 3 are observed with generally lower oxygen vacancyformation energy as well as steric hindrance, thus affording the oxidationof CO in a more facile way. The structure-performance relationshiprevealed in this work is of positive significance for the design ofhigh-performance spinel CuFe2O4 oxygen carriers.
Kinetic study on in-situ and cooling char combustion in a two-step reaction analyzer

Fang Yuan,Luo Guangqian,Li Jin,Li Kaidi,Chen Chao,Zhao Hong,Duan Ran,Yao Hong

DOI: https://doi.org/10.1016/j.proci.2016.07.045

IF: 6.535

2017-01-01

Proceedings of the Combustion Institute

Abstract:Cooling char, which is prepared in an inert atmosphere and then reacted with oxygen after cooling, has been widely used in the kinetic study of char combustion. However, there is no cooling process in commercial combustion systems and thus the impacts of the cooling process on char reactivity remain unclear. To illustrate this question, a two-step reaction analyzer was developed to study the combustion kinetics of in-situ char, which was produced at a constant high temperature in an inert atmosphere and then directly reacted with oxygen at different temperatures. Two types of Chinese coal, Shenhua sub-bituminous coal and Yangquan anthracite, were selected as samples. The results showed that the reaction rate of in-situ char was about 1.1–1.25 times of that of rapid cooling char, suggesting that the cooling process has a significant effect on char reactivity. Then the combustion rate and structure of chars cooled at different cooling rates were investigated to determine the reason for char deactivation during the cooling process. The cooling char reactivity decreased with the decreasing cooling rate, but the specific surface area did not decreased considerably. This result revealed that char deactivation during the cooling process was independent of specific surface area. As the cooling rate decreased, the oxygen chemisorption capacity (active surface area) of cooling char decreased for Shenhua coal, indicating that the observed char deactivation during the cooling process might be caused by the decrease of active surface area. In addition, Yangquan anthracite, as a high rank coal, was less sensitive to the cooling process due to its higher carbon crystallites and provision of fewer active sites for oxidation.
Experimental and theoretical insights into the reaction mechanism of spinel CuMn2O4 with CO in chemical-looping combustion

Ruixue Fang,Feng Liu,Jing Liu,Yu Li

DOI: https://doi.org/10.1016/j.apsusc.2021.150065

IF: 6.7

2021-09-01

Applied Surface Science

Abstract:Chemical-looping combustion has been regarded as a promising technology to realize low-cost CO2 separation. CuMn2O4 homogeneously combining Cu and Mn into spinel matrix is a potential oxygen carrier owing to the synergistically improved performance. The involved reaction mechanism of spinel CuMn2O4 with CO was systematically studied by experiments and theoretical calculations. Thermo-gravimetric analysis results suggested that CuMn2O4 can be reduced into Cu and MnO. The reactivity of CuMn2O4 is superior than that of Mn2O3 due to the existence of Cu. To further understand the improved reactivity of CuMn2O4, the interaction between CO and spinel CuMn2O4 was studied by density functional theory calculations. The results indicated that CO prefers to chemisorb at Mn site. The oxidation of CO on CuMn2O4 surface is found to be a three-step reaction including CO adsorption, CO diffusion and CO2 desorption. CO oxidation on CuMn2O4 surface is an exothermic reaction mainly limited by the CO diffusion step. The activation energy for oxidizing CO upon Mn-terminated surface is 64.59 kJ/mol. However, the rate-limiting-step possesses a lower activation energy (58.83 kJ/mol) over Cu-terminated surface due to the high reactivity of Cu. The calculated results can well explain the improved reactivity of spinel CuMn2O4 observed in the experiments.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Mechanistic study of the effect of oxygen vacancy and sulfur poisoning on the reaction of copper ferrite spinel with CO during chemical-looping combustion

Yu Li,Jing Liu,Feng Liu,Yingju Yang,Ruixue Fang

DOI: https://doi.org/10.1016/j.fuel.2021.120931

IF: 7.4

2021-09-01

Fuel

Abstract:The surface structure has a great influence on the chemistry property and performance of oxygen carrier used for chemical-looping combustion. Based on density functional theory and periodic structure model, the effect of oxygen vacancy and sulfur poisoning on the reaction of copper ferrite spinel with CO during chemical-looping combustion was systematically studied. The results show that Cu–O2 bridging site shows better activity towards CO adsorption on the O-defective and sulfur-poisoned copper ferrite surfaces. The adsorption energies of CO follow the order of Eads (perfect surface) > Eads (sulfur-poisoned surface) > Eads (O-defective surface). The energy barriers of CO oxidation over different surfaces are in the order of O-defective surface (Ea = 22.68 kJ/mol) > sulfur-poisoned surface (Ea = 14.19 kJ/mol) > perfect surface (Ea = 4.85 kJ/mol). The oxygen vacancy and sulfur poisoning not only weaken the reactivity towards CO adsorption, but also have a disadvantageous impact on the CO oxidation process. For the sulfur-poisoned surface, the COS formation is kinetically unfavorable as compared to CO oxidation due to the higher energy barrier (27.13 kJ/mol).

energy & fuels,engineering, chemical
Microscopic insights into the reaction mechanism of Fe-based oxygen carrier with CH 4 in chemical-looping combustion

Meirong Dong,Junchang Xiong,Hongchuan Liu,Zehua Huang,Huaming Hou,Youcai Liang,Jidong Lu

DOI: https://doi.org/10.1016/j.apsusc.2024.161011

IF: 6.7

2024-08-22

Applied Surface Science

Abstract:Fe-based oxygen carriers are regarded as a promising class of oxygen carriers in the field of chemical loop combustion. However, the elucidation of the detailed microscopic reaction mechanism of oxygen carriers remains a significant challenge. In this work, we combine in situ spectroscopy, density-functional theory (DFT) calculations, and micro-kinetic modelling to reveal the microscopic reaction mechanism of CH 4 combustion on α-Fe 2 O 3 . The macroscopic reaction characterization of hematite with CH 4 was carried out on a fixed bed and gas chromatography (GC) was utilized to detect the combustion products (CO 2 , H 2 O and H 2 ). Subsequently, in situ spectroscopy and DFT were combined to reveal the detailed pathways for the CH4 oxidation process. The results indicated that the reaction intermediates evolve from methoxy (CH 3 O*) to the bridged bidentate formate (b-HCOO*) to the monodentate formate (m-HCOO*), which ultimately leads to the formation of CO 2 through a combination of H transfer and lattice oxygen oxidation. A micro-kinetic model combined with the oxygen transport mechanism was developed, and revealed that CH 3 O* and CH 3 O* → CH 2 OO* are the key intermediates and radical reactions, respectively, for CO 2 production. The elucidation of the reaction mechanism may prove beneficial for the future development of novel Fe-based oxygen carriers.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Interaction mechanism between CO and H2S over CuFe2O4 oxygen carrier during chemical-looping combustion: A DFT study

Yu Li,Jing Liu,Feng Liu,Yingju Yang,Ruixue Fang

DOI: https://doi.org/10.1016/j.fuel.2022.124720

IF: 7.4

2022-09-15

Fuel

Abstract:During the chemical-looping combustion process, CO as an important part of syngas and H2S as a common sulfur compound inevitably coexist in the fuel. Based on the density functional theory and periodic structure model, the interaction mechanism between CO and H2S over the O-defective CuFe2O4 surface was comprehensively investigated. The results show that the adsorption energies of adsorbates on the O-defective surface are in the order of S* (−205.42 kJ/mol) > HS* (−191.37 kJ/mol) > CO (−44.88 kJ/mol) > H2S* (−28.97 kJ/mol). CO adsorption over the O-defective surface is dominant as compared to H2S adsorption. The adsorption energies of CO in the presence of H2S, HS* and S* are − 73.21, −255.98 and − 105.35 kJ/mol, respectively. The adsorption strength of CO over the O-defective surface was enhanced in the presence of HS* or S*. The presence of CO* will greatly limit the H2S dehydrogenation process, especially for the second dehydrogenation step. The energy barriers of CO oxidation with the participation of H2S*, HS* and S* are 69.66, 51.42 and 14.19 kJ/mol, respectively. COS may be produced form the reaction between CO and S* with an energy barrier of 27.13 kJ/mol, following the Eley–Rideal reaction mechanism. CuFe2O4 oxygen carrier exhibits good anti-sulfur ability because the reaction of CuFe2O4 with CO and H2S kinetically prefers the CO oxidation pathway rather than the COS formation pathway.

energy & fuels,engineering, chemical
Computational design and experimental validation of transition-metal doped CuFe2O4 as oxygen carriers in chemical-looping combustion

Yu Li,Jing Liu,Feng Liu,Yingju Yang

DOI: https://doi.org/10.1016/j.fuel.2022.125584

IF: 7.4

2022-12-15

Fuel

Abstract:Owing to low cost and minimal energy penalty, chemical-looping combustion (CLC) is regarded as a promising combustion technology for fossil fuel utilization and CO2 capture. As oxygen carrier plays a key role in delivering oxygen and heat, the development of oxygen carrier with high performance is fundamental for the application of CLC. Here, a tradeoff between formation energy and transportation barrier of oxygen vacancy was found for the rational design of spinel CuFe2O4-based oxygen carriers by using a new descriptor (Φ, coupling electronegativity and atomic radius). The reactivity of CuFe2O4 is found to be strongly relevant to the proposed descriptor Φ. Compared with the undoped CuFe2O4, the formation energy and transportation barrier of oxygen vacancies in doped CuFe2O4 are reduced, which implies that oxygen migrates more easily in doped CuFe2O4. Cr and Co dopants with great potential are screened out, and they can reduce the energy barrier of CO oxidation over CuFe2O4 from 47.91 kJ/mol to 20.19 kJ/mol and 21.54 kJ/mol, respectively. Thermogravimetric analysis (TGA) experiments show that Cr dopant can improve the low-temperature reactivity of CuFe2O4, while Co dopant can facilitate the transition of CuFe2O4 to Fe3O4 and Cu (1.5CuFe2O4 + 2CO → 1.5Cu + Fe3O4 + 2CO2).

energy & fuels,engineering, chemical
Understanding of the oxygen uncoupling characteristics of Cu Fe composite oxygen carriers for chemical-looping gasification

Kun Wang,Fuqing Wang,Qingbo Yu,Martin van Sint Annaland,Ziyu Wang,Jiaze Xi,Yunwei Zhang,Meng Xue,Shijie Du

DOI: https://doi.org/10.1016/j.fuproc.2021.106844

IF: 8.129

2021-07-01

Fuel Processing Technology

Abstract:A CuFe oxygen carrier (OC) with oxygen uncoupling capability is proposed to be applied in chemical-looping gasification with oxygen uncoupling (CLGOU) technology to increase the gasification rate. Density functional theory analysis shows that a chemical reaction occurs after Cu4O4 cluster adsorption onto α - Fe2O3 (001) surface. Extension of bond length and transfer of charge indicate the composite oxide has been activated. An optimal molar ratio of 2:1 of CuO to Fe2O3 is determined for the preparation the OC and the oxygen transport capacity is determined at 3.65 wt% with a starting oxygen uncoupling temperature is 749.5 °C. The composite OC exhibits good low-temperature oxygen uncoupling characteristics. This OC exhibits stable behaviour and satisfactory oxygen recyclability over 15 consecutive redox cycles at 900 °C / 700 °C oxygen uncoupling and absorbing temperatures. The high stability is corresponding to the calculation result (high adsorption energy of CuO onto Fe2O3). And oxygen uncoupling rates are much higher than the lower limit (0.4 wt%/min) for cracking. The chemical phases and surface micromorphology all retain stable after cycles. Using combined Coats-Redfern and Malek method, the oxygen uncoupling kinetic model of CuFe OC is determined as a shrinking core model (m = 3).

energy & fuels,engineering, chemical,chemistry, applied
Chemical-Looping Combustion with Iron-Based Oxygen Carries

XIAO Rui,ZHANG Shuai,ZHENG Wen-guang,SONG Qi-lei,YANG Yi-chao

2011-01-01

Abstract:Experimental study was carried out for chemical-looping combustion of simulated gas with iron-based oxygen carriers in a fluidized bed.Experimental results show that high CO2 concentration can be obtained at initial reactions.The conversion of CO decreases first and increases thereafter with reduction/oxidization cyclic numbers,while the H2 conversion remains 100% during the whole process of experiments.The yield of CO2 gradually increases and finally remains constant with cyclic numbers.The reactivity of oxygen carriers is high during reduc-tion/oxidization cyclic reactions.With the increase of cyclic numbers,their reactivity increased and finally reaches maximum.The oxidization process is very important for the performance of oxygen carriers,and is thus essential for oxygen carriers to keep high reactivity.
Theoretical study of reduction mechanism of Fe2O3 by H2 during chemical looping combustion

Feng Liu,Jing Liu,Yu Li,Ruixue Fang

DOI: https://doi.org/10.1016/j.cjche.2021.02.006

IF: 3.8

2021-09-01

Chinese Journal of Chemical Engineering

Abstract:An atomic-level insight into the H2 adsorption and oxidation on the Fe2O3 surface during chemical-looping combustion was provided on the basis of density functional theory calculations in this study. The results indicated that H2 molecule most likely chemisorbs on the Fe2O3 surface in a dissociative mode. The decomposed H atoms then could adsorb on the Fe and O atoms or on the two neighboring O atoms of the surface. In particular, the H2 molecule adsorbed on an O top site could directly form H2O precursor on the O3-terminated surface. Further, the newly formed HO bond was activated, and the H atom could migrate from one O site to another, consequently forming the H2O precursor. In the H2 oxidation process, the decomposition of H2 molecule was the rate-determining step for the O3-terminated surface with an activation energy of 1.53 eV. However, the formation of H2O was the rate-determining step for the Fe-terminated surface with an activation energy of 1.64 eV. The Fe-terminated surface is less energetically favorable for H2 oxidation than that the O3-terminated surface owing to the steric hindrance of Fe atom. These results provide a fundamental understanding about the reaction mechanism of Fe2O3 with H2, which is helpful for the rational design of Fe-based oxygen carrier and the usage of green energy resource such as H2.

engineering, chemical
Research and Development of Coal-fueled Chemical Looping Combustion

LI Zhenshan,BAO Jinhua,SUN Hongming,XU Lei,CAI Ningsheng

DOI: https://doi.org/10.13334/j.0258-8013.pcsee.2014.29.015

2014-01-01

Abstract:Coal-fueled chemical looping combustion was studied from three aspects. In the aspect of oxygen carriers, the gas-solid reaction of carriers was studied. Multi-crystal Fe with smooth surface was used as the reactant to eliminate the effect of pore structure. The morphology of solid products was observed under a scanning electron microscope. The problem of directly observing the product morphology was solved. A rate equation theory was developed to describe the macroscopic kinetics based on the nucleation and growth of solid product from molecular level. A model of interaction force between active components and inert supports was developed. The method of improving the reactivity of natural limonite by introducing foreign ions was proposed. In the aspect of interaction between coal and oxygen carriers, the effect of volatiles and ash on oxygen carriers was addressed. The match of char gasification rate and reduction rate can be achieved through catalytic gasification. Fragmentation, attrition, and segregation of coal particles caused the incomplete gas conversion in the fuel reactor. In the reactor aspect, a three fluidized beds reactor with dual circulating loops was built. A steady operation of 140h in hot mode was accomplished. The concepts of downer reactor, low temperature CLC, and direct CLC were proposed for converting the un-reacted gases.
Influence of doping Al on the reactivity performance of Cu–Fe spinel-type oxygen carrier during chemical-looping combustion

Yu Li,Jing Liu,Feng Liu,Yingju Yang

DOI: https://doi.org/10.1016/j.joei.2022.07.014

IF: 6.47

2022-12-01

Journal of the Energy Institute

Abstract:The development of oxygen carriers with good reactivity and anti-sulfur ability is imperative in the chemical-looping combustion (CLC). In this work, the reaction characteristics of Al-doped Cu–Fe spinel (Al–CuFe2O4) were investigated based on experiments and density functional theory calculations. The results showed that the reduction stage of Al–CuFe2O4 reaches the maximal reaction rate at 452 °C. The corresponding weight loss is about 9.71%, higher than that of CuFe2O4 (8.78%). It demonstrates that Al–CuFe2O4 shows better reaction activity than CuFe2O4 at lower temperature. Doping Al can increase the reactivity of Cu–Fe spinel-type oxygen carrier towards CO adsorption and reduce the O vacancy formation energies. Moreover, the adsorption behaviors indicate that H2S can hardly adsorb on the Al–CuFe2O4 surface in molecular form, and the adsorption energies of HS∗ and S∗ decrease while the energy barriers of H2S dissociation increase. Doping Al weakens the interaction between sulfur species and Cu–Fe spinel-type oxygen carrier, thus Al–CuFe2O4 also exhibits good anti-sulfur ability.

energy & fuels
Competition between reduction reaction and carbon deposition for CaSO4 oxygen carrier in chemical-looping combustion: A first-principle study and reaction equilibrium analysis

Fengxiao Hou,Jing Jin,Dunyu Liu,Xuesen Kou,Haoran Yang,Yongzhen Wang

DOI: https://doi.org/10.1016/j.surfin.2021.101314

IF: 6.2

2021-08-01

Surfaces and Interfaces

Abstract:To understand the reaction mechanism of chemical looping combustion with calcium-based oxygen carrier, the competition mechanisms between reduction reaction and carbon deposition for CaSO4 oxygen carrier were calculated by density functional theory and simulated by chemical reaction equilibrium analysis. In this paper, the reaction paths of reduction reaction and carbon deposition at different CaSO4(010) surface outer oxygen content (100%, 75%, 50%, 25%) were studied, and the reversibility of the reaction was fully considered. Furthermore, based on the kinetic analysis of the transition state theory, the kinetic parameters of the elementary reaction were obtained. Moreover, the reaction equilibrium simulation revealed the competition of reactions under different conditions. The results show that the energy barriers of forward and reverse reactions decrease with the oxygen content decreasing on the CaSO4 (010) outer layer surface in the reduction reaction. Besides, the forward energy barriers at each stage are lower than the reverse energy. In the carbon deposition reaction, the energy barriers of the forward reaction are higher than the reverse reaction, and the energy barriers of the reverse reaction gradually increase with oxygen content decreasing. The kinetic analysis results show the rate-limiting steps of forward and reverse reaction in reduction reaction are 75% and 25% oxygen content stage. According to the reaction equilibrium, the conversion rate of CO oxidation to CO2 decreases with temperature increasing, and the conversion rate of carbon deposition increases. The rate of CO oxidation to CO2 increase and the occurrence of carbon deposition reaction decrease with oxygen carrier ratio increasing. Thus, when the oxygen carrier is insufficient or most of CaSO4 is reduced, the carbon deposition reaction occurs easily.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Experimental and theoretical insights into the mechanism of spinel CoFe2O4 reduction in CO chemical looping combustion

Feng Liu,Fan Wu,Jing Liu,Yu Li,Yingju Yang

DOI: https://doi.org/10.1016/j.fuel.2021.120473

IF: 7.4

2021-06-01

Fuel

Abstract:The reaction mechanism of CoFe2O4 with CO during chemical looping combustion (CLC) was studied via thermogravimetric analysis (TGA) experiments and density functional theory (DFT) calculations. The CO temperature-programmed reduction revealed that the reduction of CoFe2O4 is a one-step reaction process. CoFe2O4 can be directly reduced into the Co-Fe alloy. The existence of Co evidently improves the reactivity of CoFe2O4 as compared to Fe2O3. Two types of reaction kinetics are involved in the isothermal reduction of CoFe2O4. DFT calculations were performed to study the adsorption and oxidation of CO on two terminated surfaces (surface A and surface B) of CoFe2O4 (110). The results indicated that CO preferentially chemisorbs at Co/Fe–O bridge sites on surface A and at Co/Fe atop sites on surface B. CO oxidation on surface A was more thermodynamically and kinetically favorable than that on surface B. Furthermore, the oxygen vacancy formation on surface B needs more energy consumption than that on surface A. The different reactivity between surface A and surface B may be responsible for the two reaction rate peaks observed in isothermal experiments. The synergistic effect of Co and Fe atoms on the reactivity of CoFe2O4 can be mainly ascribed to the oxygen atoms in different Co/Fe coordination environments. These results can provide fundamental insights for further improving the performance of spinel CoFe2O4 oxygen carrier.

energy & fuels,engineering, chemical
Study on the structural evolution and heat transfer performance of Cu supported on regular morphology CeO 2 in CO catalytic combustion and chemical looping combustion

Junqin Huang,Huan Liu,Chenhang Zhang,Feng Bin,Xiaolin Wei,Running Kang,Shaohua Wu

DOI: https://doi.org/10.1016/j.jclepro.2023.138038

IF: 11.1

2023-07-21

Journal of Cleaner Production

Abstract:Chemical looping combustion (CLC) and catalytic combustion (CC), which are potential technologies to promote CO→CO 2 efficient conversion and energy conservation for the steelmaking off-gas, are investigated in reaction activity, structure evolution catalysts/oxygen carriers (OCs) and energy recovery using Cu/CeO 2 materials. Activity results suggest that the rod-shaped samples with well-defined (100) crystal faces exhibit higher activity than the sphere-shaped samples with (111) crystal faces, obtaining the optimized copper content of 3 wt%. IR spectra confirmed the proposed reaction pathway that the CO adsorbed on copper sites (Cu + –CO) at the Cu–Ce interface reacts with adjacent surface lattice oxygen. The gaseous oxygen continuously migrates to the external surface of materials, thus resulting in strongly exothermic CO self-sustained combustion during CC. Such a violent reaction does not cause obvious evolution of chemical composition, crystalline phase and structure. Since the active lattice oxygen is gradually consumed but not replenished by external gaseous O 2 in time, CO combustion is not self-sustained during CLC. Therefore, the reduction cycle is no longer confined to the surface of the material but penetrates deep into its body, which accelerates Cu + enrichment at the surface and leads to irreversible sintering and agglomeration of the material.

environmental sciences,green & sustainable science & technology,engineering, environmental
Unraveling the role of absorbed O/OH on methane total oxidation on Cu surface

Juntian Niu,Jiadong Zhang,Jingchao Zhang,Haiyu Liu,Baoguo Fan,Riguang Zhang,Yan Jin

DOI: https://doi.org/10.1016/j.cplett.2023.140444

IF: 2.719

2023-03-23

Chemical Physics Letters

Abstract:The study of transition metal catalysts to catalyze CH 4 * combustion has become particularly important. To reveal the catalytic combustion mechanism of CH 4 * on the non-noble metal catalyst Cu, density functional theory (DFT) was used to calculate the catalytic combustion of methane on Cu cluster. The calculation results show that the optimal path of CH 4 activation is CH 4 *+O*→ CH 3 *+O*→ CH 2 *+O*→ CH*+O*→ C*+OH*, and O plays a key role in CO 2 * formation. The optimal paths are CH 4 *+O*→ CH 3 *+O*→ CH 2 *+O*→ CH*+O*→ [C*+OH*→ CHO*→ CO*+H*]/[C*+O*→ CO*]→ CO 2 *. These results could provide deep insights into methane total oxidation mechanisms at an atomic level.

chemistry, physical,physics, atomic, molecular & chemical
Transformation and Migrant Mechanism of Sulfur and Nitrogen during Chemical Looping Combustion with CuFe2O4

Haichuan Li,Ziheng Han,Chenye Hu,Jingjing Ma,Qingjie Guo

DOI: https://doi.org/10.3390/atmos13050786

IF: 3.11

2022-05-13

Atmosphere

Abstract:Chemical looping combustion (CLC) is a key technology for capturing CO2. Different types of oxygen carrier (OC) particles are used in coal CLC. The migration and transformation behaviors of sulfur and nitrogen are basically the same when CaFe2O4 and Fe2O3/Al2O3 are used as OC. CLC can be divided into two reaction stages: coal pyrolysis and char gasification; SO2 and NO show bimodal release characteristics, both of which show a basic trend of rising first and then falling down. The contents of H2S and NO2 increased rapidly at the beginning of the reaction and then decreased slowly at the stage of char gasification. H2S is released rapidly during coal pyrolysis and discharged from the reactor with flue gas, and then part of H2S is converted to SO2 during the char gasification stage by OC particles. NO can be oxidized by OC particles and form NO2. The increase in the reaction temperature and oxygen-to-carbon ratio (O/C) contributes to the release of sulfur and nitrogen and higher reaction temperature and O/C can inhibit the formation of metal sulfide. O2 released by CuFe2O4 significantly increases the contents of SO2, H2S, NO and NO2 in flue gas. This work is helpful for improving control strategies for pollutants.

environmental sciences,meteorology & atmospheric sciences
Evolution mechanism of functional groups during coal chemical looping combustion

Cao Kuang,Shuzhong Wang,Xiangbo Zou,Jingli Sun,Jun zhao,Ji Ye,Shiwei Qin,Gongda Chen

DOI: https://doi.org/10.1088/1742-6596/2430/1/012010

2023-02-01

Journal of Physics: Conference Series

Abstract:Abstract Chemical looping combustion (CLC) plays a vital role in coal combustion which released pure CO 2 in the exhaust gas with low energy consumption. Researchers have developed over 1000 oxygen carriers (OCs) to enhance the properties of OCs. This study focus on the microstructural changes of coal during CLC process which could provide the performance improvement direction for OCs. Results showed that the phenolic -OH group can easily be removed by CuO while the free -OH group and the self-associating -OH group are hard to be consumed by the lattice oxygen in CuO at 800 °C, showing good stability in CLC process. Aliphatic hydrocarbons could be consumed in the gas phase rapidly. The functional group of C=O maintains high reactivity with CuO which explains why the addition of CO 2 promotes the reaction rate in coal CLC. But C=C group was nonpolar bond and hard to be consumed while the -CH 2 and -CH 3 group and C-O-C group showed good reactivity with CuO. Higher reaction temperature affords higher reactivity of coal CLC process. But the -OH group changed slowly at higher temperature which could because that higher temperature makes the organic big molecular of the coal char decomposed and produce more -OH group.
Investigation of CuO–Fe 2 O 3 Oxygen Carriers with Different Supports in Chemical Looping Combustion

Shouxi Jiang,Laihong Shen,Jingchun Yan,Xin Niu,Bin Hu

DOI: https://doi.org/10.1021/acs.energyfuels.0c03694

2021-01-21

Abstract:In this study, Cu–Fe bimetallic oxygen carriers (OCs) were prepared by the impregnation method based on SiO2, Al2O3, or hematite supports and the characteristics of manufactured OCs were investigated in a fluidized-bed reactor. The X-ray diffraction studies showed that Cu in OCs existed in the form of CuFe2O4. During cyclic operations, using CO gas as a fuel, Cu–Fe OCs with hematite (CuFe–He) or Al2O3 (CuFe–Al) as a support performed better and the reactivity of the CuFe–He OC increased with the cyclic reaction number, but deactivation occurred when SiO2 was used as a support (CuFe–Si). For the CuFe–Si OC, energy-dispersive spectrometer analysis results showed that both Cu and Fe distributed uniformly, and no obvious sintering was observed on the surface of OC particles from the scanning electron microscopy results. This deactivation was due to the irreversible interaction between the iron-based OC and SiO2. The CuFe–He OC was better than the CuFe–Al OC in accelerating fuel conversion due to its high oxygen capacity during chemical looping combustion of coal. Therefore, hematite was an excellent support candidate for manufacturing Cu–Fe OCs based on the impregnation method. The ratio of oxygen in OC to C in coal (O/C) had a significant impact on the coal conversion rate, and the O/C value should be above 7 for obtaining the desired coal conversion efficiency. Besides, increasing the reaction temperature promoted coal conversion effectively in chemical looping combustion of coal, especially with the CuFe–He OC, and a reaction temperature of above 850 °C was better.This article has not yet been cited by other publications.

energy & fuels,engineering, chemical

DFT Study of the Reaction Mechanism of CuO–char in Chemical-Looping Combustion

Effects of Electric Field on Chemical Looping Combustion: A DFT Study of CO Oxidation on CuO (111) Surface

Unraveling the Structure–Reactivity Relationship of CuFe2O4 Oxygen Carriers for Chemical Looping Combustion: A DFT Study

Kinetic study on in-situ and cooling char combustion in a two-step reaction analyzer

Experimental and theoretical insights into the reaction mechanism of spinel CuMn2O4 with CO in chemical-looping combustion

Mechanistic study of the effect of oxygen vacancy and sulfur poisoning on the reaction of copper ferrite spinel with CO during chemical-looping combustion

Microscopic insights into the reaction mechanism of Fe-based oxygen carrier with CH 4 in chemical-looping combustion

Interaction mechanism between CO and H2S over CuFe2O4 oxygen carrier during chemical-looping combustion: A DFT study

Computational design and experimental validation of transition-metal doped CuFe2O4 as oxygen carriers in chemical-looping combustion

Understanding of the oxygen uncoupling characteristics of Cu Fe composite oxygen carriers for chemical-looping gasification

Chemical-Looping Combustion with Iron-Based Oxygen Carries

Theoretical study of reduction mechanism of Fe2O3 by H2 during chemical looping combustion

Research and Development of Coal-fueled Chemical Looping Combustion

Influence of doping Al on the reactivity performance of Cu–Fe spinel-type oxygen carrier during chemical-looping combustion

Competition between reduction reaction and carbon deposition for CaSO4 oxygen carrier in chemical-looping combustion: A first-principle study and reaction equilibrium analysis

Experimental and theoretical insights into the mechanism of spinel CoFe2O4 reduction in CO chemical looping combustion

Study on the structural evolution and heat transfer performance of Cu supported on regular morphology CeO 2 in CO catalytic combustion and chemical looping combustion

Unraveling the role of absorbed O/OH on methane total oxidation on Cu surface

Transformation and Migrant Mechanism of Sulfur and Nitrogen during Chemical Looping Combustion with CuFe2O4

Evolution mechanism of functional groups during coal chemical looping combustion

Investigation of CuO–Fe 2 O 3 Oxygen Carriers with Different Supports in Chemical Looping Combustion