Abstract:The implementation of the laser sintering for inkjet-printed nanoparticles and metal organic decomposition (MOD) inks on a flexible polymeric film has been analyzed in detail. A novel approach by implementing, next to a commonly 3.2 mm diameter spot laser optic, a line laser optic with a laser beam area of 2 mm × 80 mm, demonstrates the high potential of selective laser sintering to proceed towards a fast and efficient sintering methodology in printed electronics. In this work, a multiplicity of laser parameters, primary the laser speed and the laser power, have been altered systematically to identify an optimal process window for each ink and to convert the dried and non-conductive patterns into conductive and functional silver structures. For each ink, as well as for the two laser optics, a suitable laser parameter set has been found, where a conductivity without any damage to the substrate or silver layer could be achieved. In doing so, the margin of the laser speed for both optics is ranging in between 50 mm/s and 100 mm/s, which is compatible with common inkjet printing speeds and facilitates an in-line laser sintering approach. Considering the laser power, the typical parameter range for the spot laser lays in between 10 W and 50 W, whereas for the line optics the full laser power of 200 W had to be applied. One of the nanoparticle silver inks exhibits, especially for the line laser optic, a conductivity of up to 2.22 × 107 S‧m−1, corresponding to 36% of bulk silver within a few seconds of sintering duration. Both laser sintering approaches together present a remarkable facility to use the laser either as a digital tool for sintering of defined areas by means of a spot beam or to efficiently sinter larger areas by means of a line beam. With this, the utilization of a laser sintering methodology was successfully validated as a promising approach for converting a variety of inkjet-printed silver patterns on a flexible polymeric substrate into functionalized conductive silver layers for` applications in the field of printed electronics.

Laser direct sintering approach for additive manufacturing in flexible electronic

Laser Sintering by Spot and Linear Optics for Inkjet-Printed Thin-Film Conductive Silver Patterns with the Focus on Ink-Sets and Process Parameters

Conformal laser printing and laser sintering of Ag nanoparticle inks: a digital approach for the additive manufacturing of micro-conductive patterns on patterned ﬂexible substrates

Self-sintering liquid metal ink with LAPONITE? for flexible electronics

Laser-induced Shock Wave Sintering of Silver Nanoparticles on Flexible Substrates

Laser Sintering of Various Film Compositions Used in Flexible Printed Electronics

Inkjet Direct Printing Approach for Flexible Electronic

Direct Writing Highly Conductive Silver Pattern on Flexible Substrate Based on Particle-Free and Ionic Liquid-Assisted Ink

Ultrasonic‐Enabled Nondestructive and Substrate‐Independent Liquid Metal Ink Sintering

Multiscale simulation study of laser sintering of inkjet-printed silver nanoparticle inks

Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics

All-inkjet-printed Flexible Electronics Fabrication on a Polymer Substrate by Low-Temperature High-Resolution Selective Laser Sintering of Metal Nanoparticles

Ultrafast Laser-Induced Thickness-Limited Sintering of Metal Nanoparticle Film for Ultrathin Flexible Microelectronic Devices

A Fast and Cost-Effective Transfer Printing of Liquid Metal Inks for Three-Dimensional Wiring in Flexible Electronics.

Femtosecond and nanosecond laser sintering of silver nanoparticles on a flexible substrate

Fabrication of Flexible Electronics by Laser-Aided Processing of Nanoparticles

Next Generation Non-Vacuum, Maskless, Low Temperature Nanoparticle Ink Laser Digital Direct Metal Patterning for a Large Area Flexible Electronics

Self-Limited Ultraviolet Laser Sintering of Liquid Metal Nanoparticles for Ultrathin, Flexible Electromagnetic Functional Device

Rapid Laser Annealing of Silver Electrodes for Printing Organic Thin-Film Transistors on Plastic Substrates

Ultrafast Laser Additive-Subtractive Manufacturing of Planar Micro-Devices on Flexible Substrate

A Laser Printing Based Approach for Printed Electronics