Abstract:To achieve compact structure, light weight, and high thermal efficiency for the coal-fired boiler, the supercritical CO2 power cycle has been considered as one of the promising alternatives in the coal-fired power conversion system. One of the major problems concerning fossil fuel powered plants is the safety of the water wall in boiler design. In this work, the heat transfer characteristics of the supercritical CO2 tube in the combustion chamber were determined through the low Reynolds number k-ε model, the gas real model and the P-1 radiation model. The study covered the supercritical CO2 tube and the fins, and the annulus flue gas passage was also included. The wall temperature and the heat transfer coefficient were compared against those obtained from the experiments. Based on the examinations of the calculated flow and turbulence fields, the distributions of the velocity and the temperature inside the supercritical CO2 tube in the combustion chamber were resolved numerically. Moreover, the effects of the heat transfer coefficient on the heat transfer characteristics were also discussed. And it was numerically focused on the influence of the inclined angle on the flow and the heat transfer of the supercritical CO2 tube. The results show that the heat transfer coefficient keeps namely constant as the increasing inclined angle. It would help to better understand the heat transfer mechanism of unique characteristics of supercritical CO2 above the pseudo-critical temperature, which may provide the corresponding theoretical basis on the optimization design of the coal-fired boiler.

Coupled Simulation and Deep-Learning Prediction of Combustion and Heat Transfer Processes in Supercritical CO2 CFB Boiler

Simulation on Coal-Fired Supercritical CO2 Circulating Fluidized Bed Boiler: Coupled Combustion with Heat Transfer

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

Simulation of Gas-Solid Combustion Characteristics in a 1000 MW CFB Boiler for Supercritical CO2 Cycle

Simulations of Coal Combustion in a Pressurized Supercritical CO2 Circulating Fluidized Bed

Coupled Modeling of Combustion and Heat Transfer Process of a Supercritical CO2 Boiler

Coupled Modeling of Combustion and Hydrodynamics for a Coal-Fired Supercritical Boiler

Gas-Solid Hydrodynamics and Combustion Characteristics in a 600 MW Annular CFB Boiler for Supercritical CO<sub>2</sub> Cycles

A Comprehensive CFD Combustion Model for Supercritical CFB Boilers

Study on Oxy-Fuel Combustion Behaviors in a S-CO2 CFB by 3D CFD Simulation

Coupled simulation of the combustion and fluid heating of a 300 MW supercritical CO2 boiler

Co-firing characteristic prediction of solid waste and coal for supercritical CO2 power cycle based on CFD simulation and machine learning algorithm

Design and Performance Analysis of Coal-Fired Fluidized Bed for Supercritical CO2 Power Cycle

Numerical Investigation of Heat Transfer Characteristics of Supercritical CO2 Tube in Combustion Chamber of Coal-Fired Boiler

Study on Scale-Up Characteristics in Supercritical CO2 Circulating Fluidized Bed Boiler by 3D CFD Simulation

Experimental Test, Numerical Analysis and Thermal Calculation Modeling of Hundreds Kwth-Class Supercritical CO2 Fossil-Fired Boiler System

Combustion Characteristic Prediction of a Supercritical CO2 Circulating Fluidized Bed Boiler Based on Adaptive GWO-SVM

Numerical analysis and modified thermodynamic calculation methods for the furnace in the 1000 MW supercritical CO2 coal-fired boiler

Validation and Application of CPFD Model in Simulating Gas-Solid Flow and Combustion of a Supercritical CFB Boiler with Improved Inlet Boundary Conditions

Numerical Simulation on Hydrodynamics and Combustion in a Circulating Fluidized Bed under O<Subscript>2</Subscript>/CO<Subscript>2</Subscript> and Air Atmospheres

Two-Dimensional Computational Fluid Dynamics Simulation of Coal Combustion in A Circulating Fluidized Bed Combustor