Abstract:High average power, all-fiber integrated, broadband supercontinuum (SC) sources are demonstrated. Architecture for SC generation using amplified picosecond/nanosecond laser diode (LD) pulses followed by modulation instability (MI) induced pulse breakup is presented and used to demonstrate SC sources from the mid-IR to the visible wavelengths. In addition to the simplicity in implementation, this architecture allows scaling up of the SC average power by increasing the pulse repetition rate and the corresponding pump power, while keeping the peak power, and, hence, the spectral extent approximately constant. Using this process, we demonstrate >10W in a mid-IR SC extending from ∼0.8 to 4μm, >5W in a near IR SC extending from ∼0.8 to 2.8μm, and >0.7W in a visible SC extending from ∼0.45 to 1.2μm. SC modulation capability is also demonstrated in a mid-IR SC laser with ∼3.9W in an SC extending from ∼0.8 to 4.3μm. The entire system and SC output in this case is modulated by a 500Hz square wave at 50% duty cycle without any external chopping or modulation. We also explore the use of thulium doped fiber amplifier (TDFA) stages for mid-IR SC generation. In addition to the higher pump to signal conversion efficiency demonstrated in TDFAs compared to erbium/ytterbium doped fiber amplifier (EYFA), the shifting of the SC pump from ∼1.5 to ∼2μm is pursued with an attempt to generate a longer extending SC into the mid-IR. We demonstrate ∼2.5 times higher optical conversion efficiency from pump to SC generation in wavelengths beyond 3.8μm in the TDFA versus the EYFA based SC systems. The TDFA SC spectrum extends from ∼1.9 to 4.5μm with ∼2.6W at 50% modulation with a 250 Hz square wave. A variety of applications in defense, health care and metrology are also demonstrated using the SC laser systems presented in this paper.

All Fiber Structured Supercontinuum Source Based on Graded-Index Multimode Fiber

High Power All-Fiber Supercontinuum System Based on Graded-Index Multimode Fibers

Supercontinuum generation based on nanofiber

Flat and broadband supercontinuum generation by four-wave mixing in a highly nonlinear tapered microstructured fiber.

30 W all-fiber supercontinuum generation via graded-index multimode fiber pumped by picoseconds laser pulse

10Ghz-Spaced over 1100 Channel Flat Supercontinuum Source Generated in a Microstructure Fiber

Supercontinuum Generation in Graded Index Multimode Fiber Pumped by Superluminescent Pulse Amplification

All-fiber smooth supercontinuum generation in highly nonlinear dispersion-shifted fiber

Ultraflat, Monolithic, Highly Stable Supercontinuum Source Based on Fluorotellurite Fiber

40 W of supercontinuum generated by a self-pulsed pump-sharing oscillator-amplifier

All-fiber flat 1.93.5 m supercontinuum source based on germaniacore fiber

714 W all-fiber supercontinuum generation from an ytterbium-doped fiber amplifier

High power high repetition rate supercontinuum generation in graded-index multimode fibers

Experimental and Numerical Study of Supercontinuum Generation in Photonic Crystal Fiber

Two octave supercontinuum generation in a non-silica graded-index multimode fiber

Flat Supercontinuum Generation at 1550 Nm in a Dispersion-Flattened Microstructure Fibre Using Picosecond Pulse

Ultraflat Supercontinuum Generation in a Dispersion‐flattened Microstructure Fiber

Spatiotemporal Characterization of Supercontinuum Extending from the Visible to the Mid-Infrared in Multimode Graded-Index Optical Fiber

Ultra-flat NIR-to-MIR Supercontinuum Source with All-Silica Fibers Based on Rectangular NLP Pumping

Supercontinuum generation in a graded-index multimode tellurite fiber

Modulation instability initiated high power all-fiber supercontinuum lasers and their applications