Abstract:Sintered foils are currently being considered as a promising material for anode foils in capacitors due to their high specific capacitance and anti-buckling performance, which meet the requirements for capacitor winding. In this article, sintered foils with added starch were produced using a protective atmosphere sintering process. The effect of starch addition in the range of 0–50 vol% on the specific capacitance and anti-buckling performance of the sintered foils was evaluated. Scanning electron microscope (SEM) analysis confirmed the formation of the pores in the sintered foils due to the addition of starch. These pores play a crucial role in improving the specific capacitance and enhancing the anti-buckling performance of the sintered foils. However, excessive amounts of starch can have a negative impact on the specific capacitance of the sintered foils which initially decreased, then increased, and finally decreased with increasing starch content. On the other hand, the anti-buckling performance increased with increasing starch content. At 30 vol% starch addition, a high specific capacitance of 0.886 μ F/cm 2 and an anti-buckling performance of more than 120 times were obtained, meeting the requirements for anode foils in aluminum electrolytic capacitors. The specific capacitance of the sintered foils was predicted using the close-packed packing model, which can help establish a powder metallurgy method for preparing anode foil materials with high specific capacitance and anti-buckling performance for aluminum electrolytic capacitors.

Research Progress of Valve Metal Compound in High Specific Capacitance Aluminum Electrolytic Capacitors

Progress in the Studies of Anode Foils for High Voltage Electrolytic Capacitor

Progress in preparing anode aluminum foils of high specific capacitance for electrolytic capacitors

Surface Modification of Al Foils for Aluminum Electrolytic Capacitor

Research on the Anodic Aluminum Oxide As Anodic Foil of Aluminum Electrolytic Capacitor

Technologic Research and Development of Aluminum Foil for High Voltage Electrolytic Capacitor Anode

Aluminum Electrolytic Capacitor Technology：Current Status and Future Tendency

Present Research Status and Technology Development of Aluminum Foil for Electrolytic Capacitor

Progress in the Key Technologies for the Fabrication of High Specific Capacitance of Aluminum Electrolytic Capacitors

Research Development of Preparation Technology of High Voltage Anode Aluminum Foil

Surface Microstructure of Aluminum Foils for Low Voltage Anode Capacitor with High Specific Capacity

Microstructure Evolution and Performance Enhancement of Sintered Aluminum Foils for Aluminum Electrolytic Capacitors

Preparation of Al2O3/TiO2 Composite Film with High Specific Capacitance by Surface Self-assembly Method

Preparation of High Dielectric Constant Composite Oxide Films for Aluminum Electrolytic Capacitors

Anodizing model and CV simulation for etched aluminium foil for high voltage

On the etching mechanism of surface area enlarging of aluminum foils used as high-voltage electrolytic capacitors anodes

Preparation and characterization of anode foil for aluminum electrolytic capacitors by powder additive manufacturing

Fabrication and Characterization of the Hierarchical AAO Film and AAO-MnO2 Composite As the Anode Foil of Aluminum Electrolytic Capacitor

Comparative Research on Etched Aluminum Foils Fabricated by Different Techniques for Aluminum Electrolytic Capacitor

Comparison of Properties with Aluminum Foil for High Voltage Electrolytic Capacitor Both Domestic and Abroad

Electrophoresis Deposition of TiO2 Nanoparticles on Etched Aluminum Foil for Enhanced Specific Capacitance