Abstract:Great challenge exists in prediction of a laminate strength, due to too many tough issues involved. The constitutive relation of each lamina in the laminate is described by Bridging Model. Both matrix plasticity and interface debonding induced slippages have been taken into account. Significant differences do sometimes exist between predicted laminate strengths with and without matrix plasticity. Whereas stress calculation and failure detection for the fiber is relatively easy, the homogenized matrix stresses obtained micromechanically must be converted into true quantities prior to a failure assessment. The conversion for the bi-axial transverse stresses is re-established in this paper. A matrix tensile failure subjected to a 2D (two-dimensional) stress state is detected by a recently developed physics based failure criterion, while that under a 3D stress state is estimated using Tsai-Wu's criterion. Matrix compressive failures under both 2D and 3D stress states are assessed using physics based slippage failure criterion in which the normal stress influencing coefficient for the different stress state should be different. A matrix failure induced lamina failure can correspond to an ultimate failure only when an additionally critical strain condition is fulfilled. These conditions are established in the paper. All of the test cases in the first and second world wide failure exercises (WWFEs) have been analyzed using the original input data provided by the exercise organizers. All of the predictions agree well or reasonably with the available experiments. All the analyzing formulae involved are analytical and in closed-form, without any iteration for a solution.

Prediction of Stiffness Degradation Based on Machine Learning: Axial Elastic Modulus of [0m /90n ]s Composite Laminates

Prediction of Matrix-Cracking-induced Stiffness Degradation of Cross-Ply Laminates Based on Data-Driven Method

Prediction Model of Residual Load-Bearing Capacity of Composite Laminates Using Deep Learning

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

The Strength Prediction of Composite Laminates Based on a Quasi-3D Finite Element Models

A Nonlinear Fatigue Damage Model for Life Prediction of Composite Laminates

Prediction of Allowable Compression Load for Notched Composite Laminates Combining FEA Simulation and Machine Learning

Quantification of the out-of-plane loading fatigue response of bistable CFRP laminates using a machine learning approach

Experimental and Numerical Investigation Integrated with Machine Learning (ML) for the Prediction Strategy of DP590/CFRP Composite Laminates

Mechanical Properties Prediction of Composite Laminate with FEA and Machine Learning Coupled Method

A Common Model for Stiffness Degradation of Composites at Material and Product Levels

Finite Element Analysis and Fatigue Life Predication of Lamination

A mechanics-informed machine learning approach for modeling the elastoplastic behavior of fiber-reinforced composites

Fatigue life prediction of composite laminates incorporating 3D stress analysis

A Deep Learning Method for Damage Prognostics of Fiber-Reinforced Composite Laminates Using Acoustic Emission

Strength and stiffness degradation modeling and fatigue life prediction of composite materials based on a unified fatigue damage model

A Micro–macro Damage Mechanics-based Model for Fatigue Damage and Life Prediction of Fiber-reinforced Composite Laminates

Crack Density Estimation Method for Composite Laminates Based on Discrete Form Stiffness Degradation Models

Fatigue Life Prediction of Composite Laminates Based on Progressive Damage Analysis

On Strength Prediction of Laminated Composites

Micromechanical life prediction for composite laminates