Abstract:Lithium-ion batteries (LIBs) have been widely applied in portable electronic devices and electric vehicles and energy storage industries. However, with the rapid development of our society, it is more and more difficult to meet the increasing demand of people for commercial LIBs because their energy densities are generally lower than 250 W.h/kg. Thus, it is urgent to further develop higher-capacity electrode materials to efficiently increase the energy densities of LIBs. Silicon is a very attractive anode material for LIBs with superhigh theoretical capacity (4200 mA.h/g), suitable working potential and abundant earth reserve. Although the pure Si material suffers from poor cycling performance due to very large volume change during repeated lithiation/delithiation, recent researches have shown that the homogeneous carbon composite for nano-silicon could improve the cycling performance effectively. But the preparation methods of nano-silicon and carbon composite are still very complicated, limiting the large-scale preparation and application. A highly efficient one-step method to synthesize the homogeneous composite between nano-silicon and carbon sheet (nano-Si/C) was developed through mechanically milling SiCl4, Mg2Si and commercial carbon sheets. During the milling process, nano-Si is produced from the bottom-up reduction of SiCl4. The in situ formed nano-Si can directly grow on the carbon sheet, further leading to homogeneous composite between nano-Si and carbon sheet. This method possesses a very high reaction efficiency as reactants convert into nano-Si and MgCl2 completely without the gene-ration of any impurities. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) display that the nano-Si supported on carbon sheet is around 30-80 nm in diameter. As the anode material for LIBs, the nano-Si/C sample shows a very high reversible capacity (2450 mA.h/g at 0.2 A/g), good rate performance (1040 mA.h/g at 4.8 A/g) and excellent long cycling stability (retaining 1400 mA.h/g even after 600 cycles at 2 A/g). The cyclic voltammograms of nano-Si/C at different sweep rates demonstrate the electrochemical kinetics is controlled by both lithium diffusion process and pseudocapacitance effect. The outstan-ding electrochemical performance is mainly attributed to the uniform composite nanostructures between small-sized nano-Si and carbon sheet, which can maintain the structural integrity and stable electrochemical properties after lithiation/delithiation cycles, as suggested by the electrochemical impedance spectroscopy and SEM images tested after cycles. Combining cheap reactants, simple preparation step and homogeneous composite structure, this method is very promising for low-cost and large-scale preparation of high-performance Si and carbon composite anode with good application prospect.

Controllable and Large-Scale Preparation of High-Purity Nano-Silicon and Its Electrochemical Performance

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

Regulation of Si Nanodomain Size and Its Effect on Electrochemical Performance in Prelithiated SiO Anode

Ionothermal Synthesis of Crystalline Nanoporous Silicon and Its Use As Anode Materials in Lithium-Ion Batteries.

A Highly Efficient One-step Preparation Method of Nano-silicon and Carbon Composite for High-performance Lithium Ion Batteries

Electrochemical Preparation of Nano-Sized Silicon as a Lithium-Ion Battery Anode Material

Porosity Controlled Synthesis of Nanoporous Silicon by Chemical Dealloying As Anode for High Energy Lithium-Ion Batteries.

Multi-stage Stabilization and High-Strength Nano-Porous Si@C for Simple Fabrication of Lithium-Ion Batteries

Low-cost and Scalable Preparation of Nano-Si from Photovoltaic Waste Silicon for High-Performance Li-ion Battery Anode

A submicron Si@C core-shell intertwined with carbon nanowires and graphene nanosheet as a high-performance anode material for lithium ion battery

Spontaneous nanominiaturization of silicon microparticles with structural stability as flexible anodes for lithium ion batteries

Synthesis of High-Quality Mesoporous Silicon Particles for Enhanced Lithium Storage Performance

To Achieve Controlled Specific Capacities of Silicon-Based Anodes for High-Performance Lithium-Ion Batteries

SiO x @Si-graphite microspheres for high-stable anode of Lithium-ion batteries

Multipath Conduction and Large Capacity Silicon-Based Anodes for High Stabilizing Lithium-Ion Batteries

Preparation and properties of porous silicon anode coated with nitrogen-doped carbon for lithium-ion battery

Engineering Nano-Sized Silicon Anodes with Conductive Networks Toward a High Average Coulombic Efficiency of 90.2% Via Plasma-Assisted Milling

A Novel Sol-Gel Process to Encapsulate Micron Silicon with a Uniformly Ni-doped Graphite Carbon Layer by Coupling for Use in Lithium Ion Batteries

Simultaneous Purification and Perforation of Low-Grade Si Sources for Lithium-Ion Battery Anode.

Electrochemical In-Situ Lithiated Li2SiO3 Layer Promote High Performance Silicon Anode for Lithium-ion Batteries