Abstract:Crystalline silicon as an anode material for lithium-ion batteries (LIBs) has a theoretical capacity greater than 3600 mAh/g, an order of magnitude larger than the current anode materials of choice, graphite (~370 mAh/g). However, the use of silicon is hampered by several issues that hinder its widespread usage in LIBs. Chief among these is the large volume expansion that accompanies lithiation (>300%), which results in the self-pulverization of silicon during cycling and the degradation in stability and performance that accompanies it. Silicon also suffers from active lithium loss in its first cycle from the formation of Li x Si and the solid-electrolyte interphase (SEI), which irreversibly consumes lithium and decreases gravimetric/volumetric capacity (typically >20% capacity loss after the formation cycle). This capacity loss coupled with mechanical and chemical degradation leads to poor capacity retention and short cycle life. Pre-lithiation of silicon and other potential anode materials ( e.g. SiO x ), a process of inserting additional Li into Si prior to battery operation, is thus desired to compensate for lithium consumption and to maintain the high capacity associated with silicon. Here, we demonstrate a simple and scalable method for the ex situ ( i.e. outside the cell) electrochemical synthesis of pre-lithiated silicon. In this method, a current is driven though an electrochemical stir-tank reactor composed of Si powder in electrolyte suspension and a Li containing anode. When Si particles contact the conductive inner surface of the reaction vessel, lithium ions in the electrolyte are reduced on the surface to form lithium-silicon compounds. The degree of lithiation is controlled by the applied current density, applied voltage, and/or runtime. This talk will describe the chemical and structural characteristics of pre-lithiated silicon synthesized with this technique, basic electrochemical properties of our lithiated material, and the specific advantages presented by the method vs other methods.

Ionothermal Synthesis of Crystalline Nanoporous Silicon and Its Use As Anode Materials in Lithium-Ion Batteries.

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

In Situ Formation of Ionically Conductive Nanointerphase on Si Particles for Stable Battery Anode

Preparation and properties of porous silicon anode coated with nitrogen-doped carbon for lithium-ion battery

Solution synthesis of porous silicon particles as an anode material for lithium ion batteries.

Porosity Controlled Synthesis of Nanoporous Silicon by Chemical Dealloying As Anode for High Energy Lithium-Ion Batteries.

Electrochemical Preparation of Nano-Sized Silicon as a Lithium-Ion Battery Anode Material

Hydrothermal Synthesis of Nano-Silicon from a Silica Sol and Its Use in Lithium Ion Batteries

Monocrystalline Silicon Nanowires and Nanosheets As Anodes of Lithium-Ion Battery: Synthesis in Mass Production and Low Cost

Green, Scalable, and Controllable Fabrication of Nanoporous Silicon from Commercial Alloy Precursors for High-Energy Lithium-Ion Batteries

A Novel Approach to Synthesize Micrometer-Sized Porous Silicon As a High Performance Anode for Lithium-Ion Batteries

Design and Construction of Porous Silicon Materials As Stable Anodes for Lithium-Ion Batteries

Stirring-enabled formation of homogenous sub-50 nm silicon nanoparticles with a modified alumino-reduction of silica as high-performance anode materials

Green and facile fabrication of nanoporous silicon@carbon from commercial alloy with high graphitization degree for high-energy lithium-ion batteries

Monodisperse Porous Silicon Spheres as Anode Materials for Lithium Ion Batteries

Simultaneous Purification and Perforation of Low-Grade Si Sources for Lithium-Ion Battery Anode.

(Digital Presentation) Ex Situ Electrochemical Pre-Lithiation of Silicon for Lithium-Ion Battery Anodes

Monolithic Layered Silicon Composed of a Crystalline-Amorphous Network for Sustainable Lithium-Ion Battery Anodes

Large-scale synthesis of crystalline-amorphous Silicon nanoparticles as anode material for high-performance lithium ion batteries