Abstract:In a solar power tower system, the concentrating and collecting subsystem, including the heliostat field and the receiver, contains some of the most costly and technically challenging components. Many types of solar receivers make up the solar power tower system. Among them, the cavity molten salt receiver has been widely applied due to its lower heat loss. The accurate simulation of the coupled heat transfer process in the cavity receiver and the prediction of receiver performance are of great importance for the receiver design and safe operation. The solar flux distribution on cavity interior surfaces is extremely non-uniform, which has great effect on the receiver thermal performance. Taking the non-uniform solar flux distribution into consideration, the photon-thermal conversion process is simulated integrally in this paper. A hybrid simulation approach, which couples Monte Carlo ray tracing and Gebhart methods, is applied to investigate the complete solar radiation transfer process in the solar power tower system with a cavity receiver and obtain the non-uniform solar flux distribution. On this basis, the coupled photon-thermal conversion process in the molten salt cavity receiver is simulated. The effects of the fluid flow layout on the receiver performance under the non-uniform solar flux distribution are particularly revealed. Also, the variation of the receiver performance with time is analyzed in detail. The results show that the solar flux distribution on the interior surfaces of the cavity receiver is extremely non-uniform, under which the molten salt flow layout has great effects on the receiver performance. In the case of flow layout that the cold molten salt flows into the receiver in the high-flux area, the temperatures of both the absorber wall and the molten salt increase rapidly along the flow path. The temperature of the whole absorber wall is relatively high, which leads to greater heat loss and less amount of hot molten salt, and even seriously, “heat transfer deterioration” near the outlet of the receiver. When the cold molten salt flows into the receiver in the low-flux area, the temperature of both the absorber wall and the molten salt increase slowly along the flow path. The temperatures of the whole absorber wall is relatively low, which results in less heat loss and larger amount of hot molten salt. Although the shape of the solar flux distribution on the interior surfaces varied greatly with time, the evolutions of the molten salt (absorber wall) temperature at different time display similar variation tendency along the flow path. Moreover, the reflective loss varies with time greatly, while the heat loss varies with time slightly.

A comparison between lumped parameter method and computational fluid dynamics method for steady and transient optical-thermal characteristics of the molten salt receiver in solar power tower

A Practical Method to Evaluate the Thermal Efficiency of Solar Molten Salt Receivers

Integrated Numerical Study on the Coupled Photon-Thermal Conversion Process in the Central Solar Molten Salt Cavity Receiver

Modeling and dynamic simulation of receiver in a solar tower power station

Numerical Study on the Transient Thermal Performance of a Lab-Scale Molten Salt Receiver

Numerical Investigation on the Thermal Performance of Molten Salt Cavity Receivers with Different Structures

Parametric Study on Integrated Thermal and Mechanical Performance of Molten Salt Receiver for Solar Tower Power Plant

Study on the Coupled Photon-Thermal-stress Integration Method, Characteristics with Time and Failure Criterion in the Solar Molten Salt Cavity Receiver

Coupled optical-thermal-stress characteristics of a multi-tube external molten salt receiver for the next generation concentrating solar power

Coupled Optical and Thermal Performance of a Fin-Like Molten Salt Receiver for the Next-Generation Solar Power Tower

Numerical Simulation of a Lab-Scale Molten-Salt External Solar Receiver and Its Experimental Validation

Experimental and Numerical Evaluation of a Lab-Scale External Solar Receiver

Transient Response Performances and Control Strategy of Porous Volumetric Solar Receivers with Different Heat Transfer Fluids

Coupled optical and thermal simulation of the thermal performance of a 50 MWe external cylindrical solar receiver

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Conceptual Design of Porous Volumetric Solar Receiver Using Molten Salt As Heat Transfer Fluid

COUPLED HEAT TRANSFER ANALYSES OF MOLTEN SALT WITH VARIATION OF THERMOPHYSICAL PROPERTIES

Improving the Heat Transfer Performance of the Tower Molten Salt Solar Receiver with the Novel Folded Flow Tubes

Numerical and experimental study on thermal performance and thermal stress of molten salt receiver during preheating

Investigation and Optimization on Spectrally Selective Absorption for Enhanced Thermal Performance in Porous Volumetric Solar Receivers

Numerical Study on Thermal Performance and Thermal Stress of Molten Salt Receiver Tube Based on Induction Heating