Abstract:High‐voltage Li‐metal batteries often suffer from severe capacity fading due to the degradation of the cathode at high voltages and parasitic reactions between the electrolyte solution and both electrodes. The combination of a morphology‐engineered Ni‐rich cathode and the formation of a high‐quality surface film ensures long‐term stability by minimizing nonuniformity. Combining Li‐metal anodes (LMAs) with high‐voltage Ni‐rich layered‐oxide cathodes is a promising approach to realizing high‐energy‐density Li secondary batteries. However, these systems experience severe capacity decay due to structural degradation of high‐voltage cathodes and side reactions of electrolyte solutions with both electrodes. Herein, the use of multi‐functional additives in fluoroethylene carbonate‐based electrolyte solutions that enable the operation of successfully rechargeable high‐voltage (4.5 V) Li‐metal batteries (LMBs) with high areal capacity (>4 mAh cm−2) are reported. Customized electrolyte solutions are pivotal in passivating the electrodes, minimizing microcrack formation, and ensuring that current is uniformly distributed within cathode particles. The developed electrolyte solution protects the LMA by forming a very stable and effective solid–electrolyte interphase. Together with the Li[Ni0.78Co0.1Mn0.12]O2 cathode material, which is composed of radially aligned rod‐shaped primary particles, the developed high‐voltage LMB containing 20 mg cm−2 of cathode material delivers a high specific capacity of 230 mAh g−1 at 0.1 C and retains >86% of its initial capacity after 200 cycles at 0.5 C. This study highlights the significance of controlling the interfacial structure via electrolyte solution modification and the use of cathode materials with engineered morphologies that enhance mechanical stability.

Additive Engineering for Robust Interphases to Stabilize High-Ni Layered Structures at Ultra-High Voltage of 4.8 V

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Improving Cycling Stability of Ni‐Rich Cathode for Lithium‐Metal Batteries via Interphases Tunning

Constructing LiF/Li2CO3-rich heterostructured electrode electrolyte interphases by electrolyte additive for 4.5 V well-cycled lithium metal batteries

Amphiphilic Polymer Electrolyte Blocking Lattice Oxygen Evolution from High‐Voltage Nickel‐rich Cathodes for Ultra‐Thermal Stabile Batteries

High-voltage electrolyte design for a Ni-rich layered oxide cathode for lithium-ion batteries

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Enhanced high-voltage robustness of ultra-high nickel cathodes by constructing lithium-ion conductor buffer layer for highly stable lithium-ion batteries

Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Single–crystalline LiNi0.8Co0.1Mn0.1O2 Stabilized by F–doping–induced Superlattice for 4.8 V Lithium–ion Batteries

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

Bifunctional Self-Assembled Molecular Layer Enables Stable Ni-rich Cathodes

Armoring LiNi1/3Co1/3Mn1/3O2 Cathode with Reliable Fluorinated Organic-Inorganic Hybrid Interphase Layer Toward Durable High Rate Battery

Stable Cycling of High-Voltage Lithium-Metal Batteries Enabled by High-Concentration FEC-Based Electrolyte

Stabilizing reaction interface in Ni-rich layered oxides cathode for high-performance lithium-ion batteries at a high cutoff voltage