Abstract:Overcoming the strength-plasticity trade-off in GPa-grade dual-phase steel while simultaneously enhancing both properties poses a significant challenge. In this study, we propose an innovative strategy to break this inherent dilemma by designing an alternately arranged ferrite and martensite lamellar microstructure with appreciable deformation coordination in dual-phase steel. Compared to traditional dual-phase steel (DP steel) with a block microstructure and the same phase components, the newly developed heterogeneous lamellar dual-phase steel (L-DP steel) prepared by a cyclic intercritical quenching process demonstrates a remarkable 90 % increase in uniform elongation (from 9.1 +/- 0.4 % in DP steel to 17.3 +/- 0.3 % in L-DP steel). The ultimate tensile strength increases slightly from 1002 +/- 10 MPa (DP steel) to 1034 +/- 11 MPa (L-DP steel). The lamellar martensite and lamellar ferrite with a certain hardness difference lead to high back stress during plastic deformation, thereby ensuring the ultra-high tensile strength of the L-DP steel. The improved ductility of the L-DP steel is primarily attributed to the appreciable coordinated deformation ability of the lamellar microstructure and the considerable plastic deformation ability of lamellar martensite. These two outstanding capabilities allow this unique microstructure to elongate continuously along the tensile direction, facilitating persistent work hardening without premature cracking. Furthermore, the heterogeneous hardening triggered by the mutual constraints of the lamellar microstructure during the plastic deformation also contributes additional work hardening to enhance the ductility. The design of lamellar microstructure under a cyclic intercritical quenching process presents an efficient and feasible pathway for producing GPa-grade dual-phase steel with considerable ductility.

Strength-ductility Synergy in a 1.4 GPa Austenitic Steel with a Heterogeneous Lamellar Microstructure

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Achieving Unexpected Strength and Ductility Synergies in Heterogeneous Metastable Lamellar Steels

Enhancing Strength and Plasticity Synergy in Transformation-Induced Plasticity-Aided Lean Duplex Stainless Steel Based on the Ultrafine-Grained Austenite

Design of Tri-Phase Lamellar Architectures for Enhanced Ductility in Ultra-Strong Steel

Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure

Achieving Excellent Strength–Ductility Synergy by Tailoring the Grain Size Distribution in a Metastable Austenitic Stainless Steel

Overcoming the strength-ductility trade-off in metastable dual-phase heterogeneous structures using variable temperature rolling and annealing

Novel 1.5 GPa-strength with 50%-ductility by transformation-induced plasticity of non-recrystallized austenite in duplex steels

Ensuring the strength and ductility synergy in an austenitic stainless steel: single- or multi-phase hetero-structures design

Dual Nanoprecipitation and Nanoscale Chemical Heterogeneity in a Secondary Hardening Steel for Ultrahigh Strength and Large Uniform Elongation

Strength‐Ductility Synergy in an Austenitic Stainless Steel Processed by Warm Rolling and Subsequent Cryogenic Treatment

A cryogenic ultra-strong and ductile steel induced by stable nanoscale dual-phase structure

Tailoring hetero-grained austenite via a cyclic thermomechanical process for achieving ultrahigh strength-ductility in medium-Mn steel

Achieving Superior Ductility at High Strain Rate in a 1.5 GPa Ultrahigh-Strength Steel without Obvious Transformation-Induced Plasticity Effect

Synergistic strengthening effect achieved good ductility in ultrahigh strength Fe-22Mn-8Al-0.8C austenitic lightweight steels

Achieving High Strength and High Ductility of Dual-Phase Steel Via Alternating Lamellar Microstructure

Tailoring Heterogeneous Microstructure in a High-Strength Low-Alloy Steel for Enhanced Strength-Toughness Balance

Simultaneous enhancement of strength and ductility by combining heterogeneous microstructure and nanoprecipitates

Achieving unprecedented yield strength of 2.2 GPa with high ductility in formed parts using strain-aging

Dislocation Strengthening Without Ductility Trade-Off in Metastable Austenitic Steels