Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

Direct Synthesis of Isoparaffin-rich Gasolinefrom Syngas

High-Quality Gasoline Directly from Syngas by Dual Metal Oxide-Zeolite (OX-ZEO) Catalysis

Enhanced Formation of Multi-Branched Isoparaffins in Syngas Conversion by ZnCrOx-MCM-22 Composites

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Direct Production of Hydrocarbons by Fischer-Tropsch Synthesis Using Newly Designed Catalysts

Modulated hydrocarbon distribution of gasoline deriving from butene conversion in the presence of syngas

Fischer-Tropsch Synthesis of C4-C5 Isoparaffins Via Cox Mn1-x O Nanocomposites with Suppressed CO2

Direct Conversion of Syngas to Gasoline Ranged Olefins over Na Impellent Fe@NaZSM-5 Catalyst

Fischer-Tropsch Synthesis of C4-C5 Isoparaffins via CoxMn1- xO Nanocomposites with Suppressed CO2

Gasoline-range Hydrocarbon Synthesis over Co/SiO2/HZSM-5 Catalyst with CO2-containing Syngas

Oxide-Zeolite-Based Composite Catalyst Concept That Enables Syngas Chemistry beyond Fischer-Tropsch Synthesis

Design of novel hierarchical cage active particles and zeolite for direct conversion of syngas to gasoline fuel

Direct conversion of CO2 into liquid fuels with high selectivity over a bifunctional catalyst

Direct synthesis of iso-paraffin fuel from palm oil on mixed heterogeneous acid and base catalysts

H-type Zeolite Coated Iron-Based Multiple-Functional Catalyst for Direct Synthesis of Middle Isoparaffins from Syngas

New Insights for High-Throughput CO2 Hydrogenation to High-Quality Fuel

Synthesis of Lower Olefins Directly from Syngas over Indium-Based Oxide Bifunctional Catalysts

Identification of Active Sites over MCM-49 for Direct Syngas Conversion to Gasoline

Upgrading gasoline production through optimizing zeolite properties in the direct hydrogenation of CO 2 /CO

Core–Shell Metal Zeolite Composite Catalysts for In Situ Processing of Fischer–Tropsch Hydrocarbons to Gasoline Type Fuels

Biogasoline production from linoleic acid via catalytic cracking over nickel and copper-doped ZSM-5 catalysts