Abstract:Based on the recently constructed n-body potential, both molecular dynamics and Monte Carlo simulations revealed that the Al-Zr amorphous alloy or metallic glass can be obtained within the composition range of 24–66 at. % Zr. The revealed composition range could be considered the intrinsic glass-forming range and it quantitatively indicates the glass-forming ability of the Al-Zr system. The underlying physics of the finding is that, within the composition range, the amorphous alloys are energetically favored to form. In addition, it is proposed that the energy difference between a solid solution and the amorphous phase could serve as the driving force of the crystalline to amorphous transition and the driving force should be sufficiently large for amorphization to take place. The minimum driving forces for fcc Al-based and hcp Zr-based Al-Zr solid solutions to amorphize are calculated to be about −0.05 and −0.03 eV/atom, respectively, whereas the maximum driving force is found to be −0.23 eV/atom at the alloy stoichiometry of Al60Zr40. A thermodynamics parameter γ¯, defined as the ratio of the driving force to the formation energy of the solid solution, is further proposed to indicate the glass-forming ability of an Al-Zr alloy. Thermodynamics calculations show that the glass-forming ability of the Al56Zr44 alloy is the largest, implying that the Al56Zr44 amorphous alloy is more ready to form than other alloys in the Al-Zr system. Besides, Voronoi analysis found that there exists a strong correlation between the coordinate number and structure. Amorphization could result in increase of coordinate numbers and about 1.5% volume-expansion. The volume-expansion induced by amorphization can be attributed to two factors, i.e., the total bond number of the Al-Zr amorphous phase is greater than that of the corresponding solid solution, and the averaged bond length of the Al-Zr amorphous phase is longer than that of the corresponding solid solution. For the Al-Zr alloys, especially for the Al-Zr amorphous phase, there exists a negative chemical micro-inhomogeneity in the alloys, suggesting that metallic bonds prefer to be formed between the atoms of dissimilar species. Finally, it is found that there is a weak correspondence between the bond-angle distributions of Al-Zr amorphous alloys and the solid solutions. It is further suggested that the configuration of Al-Zr amorphous alloys embodies some hybrid imprint of bcc, fcc, and hcp structures. More interestingly, the short-range order is also observed in the bond-angle distributions.

Structure and Glass-Forming Ability of Al-Based Amorphous Alloys

Al-based amorphous alloys: Glass-forming ability, crystallization behavior and effects of minor alloying additions

Advances in Synthesis and Characterization of Aluminum‐Based Amorphous Alloys: A Review

Structural Origin Underlying Poor Glass Forming Ability Of Al Metallic Glass

Structures and Functional Properties of Amorphous Alloys

The Microstructure, Morphology, and Mechanical Properties of Sol-Gel-derived Amorphous Aluminum Oxide Films

Research Progress in High-entropy Metallic Glasses: Comprehensive Properties and Composition Patterns Characteristics

Designing Advanced Amorphous/Nanocrystalline Alloys by Controlling the Energy State

Fe-based amorphous coatings: Structures and properties

Glass-Forming Ability and Thermal Properties of Al70Fe12.5V12.5X5(X = Zr, Nb, Ni) Amorphous Alloys via Minor Alloying Additions

Glass-Forming Ability of Al-Co Alloy under Rapid Annealing

Developing novel amorphous alloys from the perspectives of entropy and shear bands

Research and development of Mg-based amorphous alloy glass and composite materials

Formation and structure of Al-Zr metallic glasses studied by Monte Carlo simulations

Amorphous–nanocrystalline alloys: fabrication, properties, and applications

Specific Features of Structure Transformation and Properties of Amorphous-Nanocrystalline Alloys

Research Progress of High Strength Zr-based Bulk Amorphous Alloys

Amorphous alloys for electrocatalysis: The significant role of the amorphous alloy structure

An ab initio simulation and experimental studies of the glass-forming ability and properties of Al86Ni(14-x)Zrx (x = 1∼7) alloys

Engineering Atomic-to-Nano Scale Structural Homogeneity towards High Corrosion Resistance of Amorphous Magnesium-Based Alloys

Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys