Abstract:Introduction: Nanofibers are one of the role-playing innovations of nanotechnology. Their high surface-to-volume ratio allows them to be actively functionalized with a wide range of materials for a variety of applications. The functionalization of nanofibers with different metal nanoparticles (NPs) has been studied widely to fabricate antibacterial substrates to battle antibiotic-resistant bacteria. However, metal NPs show cytotoxicity to living cells, thereby restricting their application in biomedicine. Objectives: To minimize the cytotoxicity of NPs, biomacromolecule lignin was employed as both a reducing and capping agent to green synthesize silver (Ag) and copper (Cu) NPs on the surface of highly activated polyacryloamidoxime nanofibers. The activation of polyacrylonitrile (PAN) nanofibers via amidoximation was employed for enhanced loading of NPs to achieve superior antibacterial activity. Methodology: At first, electrospun PAN nanofibers (PANNM) were activated to produce polyacryloamidoxime nanofibers (AO-PANNM) by immersing PANNM in a solution of Hydroxylamine hydrochloride (HH) and Na2CO3 under controlled conditions. Later, Ag and Cu ions were loaded by immersing AO-PANNM in different molar concentrations of AgNO3 and CuSO4 solutions in a stepwise manner. The reduction of Ag and Cu ions into NPs to fabricate bimetal-coated PANNM (BM-PANNM) was carried out via alkali lignin at 37 °C for 3 h in a shaking incubator with ultrasonication every 1 h. Results: AO-APNNM and BM-PANNM hold their nano-morphology except for some changes in fiber orientation. XRD analysis demonstrated the formation of Ag and CuNPs as evident from their respective spectral band. Maximum 8.46 ± 0.14 wt% and 0.98 ± 0.04 wt% Ag and Cu species were loaded on AO-PANNM, respectively as revealed by ICP spectrometric analysis. The hydrophobic PANNM turned into super hydrophilic, having WCA of 14 ± 3.32° after amidoximation which further reduced to 0° for BM-PANNM. However, the swelling ratio of PANNM reduced from 13.19 ± 0.18 g/g to 3.72 ± 0.20 g/g for AO-PANNM. Even at the third cycle test against S. aureus strains, 0.1Ag/Cu-PANNM, 0.3Ag/Cu-PANNM, and 0.5Ag/Cu-PANNM displayed bacterial reduction of 71.3 ± 1.64 %, 75.2 ± 1.91 %, and 77.24 ± 1.25 %, respectively. On 3rd cycle test against E. coli, above 82 % bacterial reduction was noticed for all BM-PANNM. Amidoximation increased COS-7 cell viability up to 82 %. The cell viability of 0.1Ag/Cu-PANNM, 0.3Ag/Cu-PANNM, and 0.5Ag/Cu-PANNM was found to be ∼68 %, ∼62, and 54 %, respectively. In LDH assay, almost no release of LDH was detected, suggesting the compatibility of the cell membrane in contact with BM-PANNM. The improved biocompatibility of BM-PANNM even at higher loading (%) of NPs must be ascribed to the controlled release of metal species in the early stage, antioxidant, and biocompatible lignin capping of NPs. Conclusions: BM-PANNM displayed superior antibacterial activity against E. coli and S. aureus bacterial strains and acceptable biocompatibility of COS-7 cells even at higher loading (%) of Ag/CuNPs. Our findings suggest that BM-PANNM can be used as a potential antibacterial wound dressing and other antibacterial applications where sustained antibacterial activity is needed.

Lignin as a multi-functional agent for the synthesis of Ag nanoparticles and its application in antibacterial coatings

Lignin-containing Nanocellulose for in situ Chemical-Free Synthesis of AgAu-based Nanoparticles with Potent Antibacterial Activities

Ultrasonic-assisted Synthesis of Lignin-Based Ultrasmall Silver Nanoparticles for Photothermal-Mediated Sterilization.

Microwave-mediated fabrication of silver nanoparticles incorporated lignin-based composites with enhanced antibacterial activity via electrostatic capture effect

Preparation of Alkali‐Resistant Lignin Nanospheres Loaded with Silver Nanoparticles and Their Applications Toward Antibiosis and Printing

UV‐Induced Oxidation Preparation of Multi‐Functional Lignin‐Based AgNPs and its Application for Conductive Coating, Antibacterial Enhancement, and Product Separation

Efficient Antibacterial Silver Nanoparticles Composite Using Lignin As a Template

One-pot synthesis of monodisperse silver-lignin particles: Enhanced antibacterial agents against antibiotic-resistant bacteria

Lignin-facilitated growth of Ag/CuNPs on surface-activated polyacryloamidoxime nanofibers for superior antibacterial activity with improved biocompatibility

In Situ Reduction of Silver Nanoparticles in the Lignin Based Hydrogel for Enhanced Antibacterial Application.

Rapid synthesis of ferulic acid-derived lignin coated silver nanoparticles with low cytotoxicity and high antibacterial activity

Novel Lignin-Capped Silver Nanoparticles against Multidrug-Resistant Bacteria

Fabrication of flower-like Ag/lignin composites and application in antibacterial fabrics

Engineering of Near-Infrared-Activated Lignin-Polydopamine-Nanosilver Composites for Highly Efficient Sterilization

UV-Assisted Room-Temperature Fabrication of Lignin-Based Nanosilver Complexes for Photothermal-Mediated Sterilization.

A Lignin Silver Nanoparticles/Polyvinyl Alcohol/Sodium Alginate Hybrid Hydrogel with Potent Mechanical Properties and Antibacterial Activity

Fabricating Antibacterial and Antioxidant Electrospun Hydrophilic Polyacrylonitrile Nanofibers Loaded with AgNPs by Lignin-Induced In-Situ Method

Organic acid-fractionated lignin silver nanoparticles: Antimicrobial, anticancer, and antioxidant characteristics

Facile synthesis of easily separated and reusable silver nanoparticles/aminated alkaline lignin composite and its catalytic ability.

Green synthesis of Ag/lignin nanoparticle-loaded cellulose aerogel for catalytic degradation and antimicrobial applications

Lignin Nanoparticles: Green Synthesis in a gamma-Valerolactone/Water Binary Solvent and Application to Enhance Antimicrobial Activity of Essential Oils