Abstract:Fabrication of spherical lignin nanoparticles (LNPs) is opening more application opportunities for lignin. However, dissolution of LNPs at a strongly alkaline pH or in common organic solvent systems has prevented their surface functionalization in a dispersion state as well as processing and applications that require maintaining the particle morphology under harsh conditions. Here, we report a simple method to stabilize LNPs through intraparticle cross-linking. Bisphenol A diglycidyl ether (BADGE), a cross-linker that, like lignin, contains substituted benzene rings, is coprecipitated with softwood Kraft lignin to form hybrid LNPs (hy-LNPs). The hy-LNPs with a BADGE content ≤20 wt % could be intraparticle cross-linked in the dispersion state without altering their colloidal stability. Atomic force microscopy and quartz crystal microbalance with dissipation monitoring were used to show that the internally cross-linked particles were resistant to dissolution under strongly alkaline conditions and in acetone-water binary solvent that dissolved unmodified LNPs entirely. We further demonstrated covalent surface functionalization of the internally cross-linked particles at pH 12 through an epoxy ring-opening reaction to obtain particles with pH-switchable surface charge. Moreover, the hy-LNPs with BADGE content ≥30% allowed both inter- and intraparticle cross-linking at >150 °C, which enabled their application as waterborne wood adhesives with competitive dry/wet adhesive strength (5.4/3.5 MPa).The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c09500?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c09500</a>.Table showing the preparation parameters, final obtained concentrations, and yields of the hy-LNPs and LNPs; volume-based hydrodynamic diameter distributions and ζ potential distributions of the hy-LNPs and LNPs; colloidal stability of the hy-LNPs in aqueous media at various temperatures; vuring of hy-LNPs10 in dispersion state and their resistance to acetone-water (3:1, w/w) after curing; table showing the average particle heights of 0.5–8 h cured hy-LNPs20, before and after rinsing with acetone-water (3:1, w/w); IR absorption of 0 to 8 h cured hy-LNPs20; Dh and ζ potential of the uncured and 4 h cured hy-LNPs20; DLS results of the uncured hy-LNPs20 at pH 12.9; scanning electron microscopic images of the veneer surfaces with and without cured hy-LNPs30; photo showing the wood failure occurring to the 0.8 mm-thick veneers during adhesive strength test; DSC results of the hy-LNPs, mechanically blended SKL and BADGE mixture, BADGE (in solid form) and SKL; AFM and ATR-FTIR results of the hy-LNPs and LNPs after various heat-treatments; 31P NMR and XPS results of the untreated and heat-treated LNPs; SKL molar mass distribution determined with GPC (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c09500/suppl_file/nn0c09500_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation of Alkali‐Resistant Lignin Nanospheres Loaded with Silver Nanoparticles and Their Applications Toward Antibiosis and Printing

Lignin as a multi-functional agent for the synthesis of Ag nanoparticles and its application in antibacterial coatings

Preparation of Water-Insoluble Lignin Nanoparticles by Deep Eutectic Solvent and Its Application As a Versatile and Biocompatible Support for the Immobilization of Α-Amylase.

Lignin-Mediated Silver Nanoparticle Synthesis for Photocatalytic Degradation of Reactive Yellow 4G and In Vitro Assessment of Antioxidant, Antidiabetic, and Antibacterial Activities

Fabricating Antibacterial and Antioxidant Electrospun Hydrophilic Polyacrylonitrile Nanofibers Loaded with AgNPs by Lignin-Induced In-Situ Method

Efficient Antibacterial Silver Nanoparticles Composite Using Lignin As a Template

Lignin-containing Nanocellulose for in situ Chemical-Free Synthesis of AgAu-based Nanoparticles with Potent Antibacterial Activities

In Situ Reduction of Silver Nanoparticles in the Lignin Based Hydrogel for Enhanced Antibacterial Application.

UV‐Induced Oxidation Preparation of Multi‐Functional Lignin‐Based AgNPs and its Application for Conductive Coating, Antibacterial Enhancement, and Product Separation

Facile synthesis of easily separated and reusable silver nanoparticles/aminated alkaline lignin composite and its catalytic ability.

One-pot synthesis of monodisperse silver-lignin particles: Enhanced antibacterial agents against antibiotic-resistant bacteria

Facile Preparation of Lignosulfonate Induced Silver Nanoparticles for High Efficient Removal of Organic Contaminants in Wastewater

Lignin Nanoparticles: Green Synthesis in a gamma-Valerolactone/Water Binary Solvent and Application to Enhance Antimicrobial Activity of Essential Oils

Organic acid-fractionated lignin silver nanoparticles: Antimicrobial, anticancer, and antioxidant characteristics

Green synthesis of Ag/lignin nanoparticle-loaded cellulose aerogel for catalytic degradation and antimicrobial applications

Solvent-Resistant Lignin-Epoxy Hybrid Nanoparticles for Covalent Surface Modification and High-Strength Particulate Adhesives

Ultrasonic-assisted Synthesis of Lignin-Based Ultrasmall Silver Nanoparticles for Photothermal-Mediated Sterilization.

Facile and Efficient Synthesis of Silver Nanoparticles Based on Biorefinery Wood Lignin and Its Application As the Optical Sensor

Preparation of Lignin-Based Nanoparticles with Excellent Acidic Tolerance As Stabilizer for Pickering Emulsion.

Lignin Nanoparticles and Alginate Gel Beads: Preparation, Characterization and Removal of Methylene Blue