Abstract:Second-generation (2G) high-temperature superconducting (HTS) tapes are now capable of carrying very high transport current and promising for a wide range of applications. The critical current of HTS coils is important for applications, such as superconducting electric machines, superconducting magnetic energy storage, and superconducting magnets. Therefore, precisely and quickly calculating critical current of HTS coils is very important for designing HTS devices. This paper provides a fast algorithm for evaluating critical current of HTS pancake coil. The fast algorithm is realized through a stationary model, which is based on finite element method (FEM) software. The stationary model means that the model is solved by stationary study instead of time-dependent study. To validate this method, a pancake HTS coil was wound and its critical current was measured. Meanwhile, an axial symmetric stationary model was built according to the geometry of the measured HTS coil. By comparing measured and calculated results, the effectiveness of the stationary model was demonstrated. Moreover, the stationary model is compared with H formulation model. The calculated results by the two models are nearly the same. However, by using stationary calculation, the stationary model can remarkably speed up the computational process. Due to the advantage of calculating speed, the stationary model can be used to characterize and design large-scale HTS applications.

Structure Design and Multiprocess Stress Calculation of HTS Double Pancake of a 35-Kv/3.5-mva Single-Phase HTS-Controllable Reactor

Development of a Conduction-Cooled HTS SMES

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Stress Analysis of Winding Process, Cooling Down, and Excitation in a 10.7 T REBCO HTS Magnet

Study on Electromagnetic Stress Optimization and Its Resistant Structure in Toroidal HTS Magnet Applied in High-Energy Storage Density SMES

Stress Reduction And Storage Capacity Enhancement Of The Hts-Smes Using Reinforcing Overbanding Structure

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

An Optimize Design of HTS Transformer:Multi-Width and Multi-Distance Structure

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Fast Algorithm for Evaluating Critical Current of High-Temperature Superconducting Pancake Coil

Numerical Simulation of Mechanical Stress & Thermal Stress Test of 550kV High Coupled Split Reactor

A Generalized Model of HTS-HTS Joint Resistance for Superconducting Magnets

Processing techniques and experimental study on HTS double - pancake coils

FE Stress Analysis of Toroidal Field Magnet System in HT-7U

ANALYSIS OF A CONDUCTION-COOLED HTS MAGNET

Numerical Study on Ramping Loss of an HTS Pancake Coil with Different Co-Wound Materials

Evaluation of the Structural Dynamics of a 2G HTS Magnet System Considering Electromagnetic and Thermal Stress

Design and simulation of a high temperature superconducting pulsed power transformer model for pulsed power supply

Design and Analysis of High Temperature Superconducting Current Leads for CRAFT TF Magnet

Simulation of Dynamic Stress in PF Superconducting Magnets for KSTAR under Normal Operating Conditions

Stability Study on the HT-7U TF and PF Superconducting Magnets