Abstract:Traditional cement-based grouting materials have good reinforcement and anti-seepage effects on the surrounding rock under normal conditions, but the grouting effect is not ideal due to problems such as a long setting time, a low stone ratio, and poor crack resistance under high water pressure and in a dynamic water environment. In this study, we aimed to improve the physical properties, chemical properties, and microstructure of a cement-based slurry by forming a hydrogel through its chemical crosslinking with polyvinyl alcohol and boric acid as modifiers for the purpose of improving the permeability resistance of the surrounding rock grouting under high-water-pressure conditions, which can expand the function of traditional building materials. The grouting effect of the modified cementitious material on the surrounding rock was analyzed through indoor tests, the SEM testing of the performance of the modified slurry, the numerical calculation of the seepage field, and the application of the modified slurry in combination with the actual project to verify the water-plugging effect. The research findings demonstrate that (1) the additives boric acid and PVA can significantly speed up the slurry gel time, and the gel time can be controlled within 2–20 min to meet the specification requirements. (2) At a velocity of moving water > 1 m/s, the retention of the solidified modified slurry stone body reaches more than 80%. According to the SEM analysis, the structure of the solidified modified slurry stone body is dense and has good impermeability. (3) According to the numerical calculation analysis, the modified slurry can effectively change the seepage field of the surrounding rock and improve its seepage resistance. The water pressure outside the lining is reduced by 47%, 31%, and 22%, respectively, compared with no slurry, the pure cement slurry, and cement–water-glass grouting, and the indoor test and numerical simulation conclusions are consistent.

Grouting performance improvement for natural hydraulic lime-based grout via incorporating silica fume and silicon-acrylic latex

Sedimentation-affected Engineering Performances and Microstructures of a Hybrid Portland- Sulfate Aluminate Cement Grout Cast in Long Tubes

Effect of Additives on the Rheological and Mechanical Properties of Microfine-Cement-Based Grout

Study on the effect of mineral admixtures on working and mechanical properties of the grouting material

Development of High-Performance Microfine Cementitious Grout with High Amount of Fly Ash, Silica Fume, and Slag

Performance improvement of nanocolloidal silica-aluminate cement composite grouting materials with organic acids

Optimization of microfine-cement-based slurry containing microfine fly ash and nano-CaCO3 for microfracture grouting

Study on properties of inorganic grouting material modified by ultrafine slag powder

Research on Sustainable Development of Fine-Grained Material Cement Slurry

The Effect of Incorporating Ultra-Fine Spherical Particles on Rheology and Engineering Properties of Commercial Ultra-High-Performance Grout

Improving the Anti-washout Property of Acrylate Grouting Material by Bentonite: Its Characterization, Improving Mechanism, and Practical Application

Heterogeneous distribution of lightweight porous ceramic sands in a high strength cement grout

Workability and mechanical properties of ultrafine cement based grout for structural rehabilitation: A parametric study on the partial replacement with SCMs

Investigation on basic properties and microscopic mechanisms of polyacrylate latex modified cement grouting material for water blocking and reinforcement

Experimental Study on Modification of Grouting Material for Joints of Prefabricated Buildings

Strengthening effect of sulphoaluminate cementitious grouting material for water-bearing broken rocky stratum

High-Fluidization, Early Strength Cement Grouting Material Enhanced by Nano-SiO2: Formula and Mechanisms

Formulation and properties of a new cleaner double liquid alkali-activated grouting material

Development and application of novel microfine cement-based grout

Evaluation of Cement-Based Grout for Reinforcing Unsafe Rocks of Stone Carvings at Hangzhou Klippe in China

Experimental Study on Performance of Modified Cement-Based Building Materials under High-Water-Pressure Surrounding Rock Environment