Abstract:The occurrence of sulfur in coal direct liquefaction residue affects its further high quality and high value utilization. Electrochemical desulfurization is characterized by mild reaction conditions, simple operation, easy separation of sulfur conversion products and little influence on the properties of the liquefied residue. An anodic electrolytic oxidation desulphurization experiment was carried out on the liquefaction residue of the by-product of a coal-to-liquid enterprise in the slurry state. An electrochemical test and material characterization of raw materials before and after electrolysis showed that electrolytic oxidation can desulfurize the liquefaction residue under an alkaline condition. Linear sweep voltammetry (LSV) was used for the electrolysis experiments to obtain the optimal slurry concentration of 60 g/L. On this basis, the reaction kinetics were calculated, and the minimum activation energy in the interval at 0.9 (V vs. Hg/HgO) was 19.71 kJ/mol. The relationship between the electrolytic desulfurization of the liquefied residue and energy consumption was studied by the potentiostatic method. The influence of anodic potential and electrolytic temperature on the current density, cell voltage, desulfurization rate and energy consumption was investigated. The experimental results showed that the desulfurization rate and total energy consumption increase positively with the increase in reaction temperature and electrolytic potential in a certain range. The influence of the reaction temperature on the desulfurization rate and total energy consumption is more prominent than that of electrolytic potential, but the energy consumption of sulfur removal per unit mass does not show a positive correlation. Therefore, with the energy consumption per unit mass of sulfur removal as the efficiency index, the optimal experimental results were obtained: under the conditions of 0.8 (V vs. Hg/HgO) anode potential, 50 °C electrolytic temperature, 60 g/L slurry concentration and 14,400 s electrolytic time, the desulfurization rate was 18.85%, and the power consumption per unit mass of sulfur removal was 5585.74 W·s/g. The results of XPS, SEM, BET and IC showed that both inorganic and organic sulfur were removed by electrolytic oxidation, and the morphology, pore structure and chemical bond of the liquefied residue were affected by electrolytic oxidation. The research method provides a new idea and reference for the efficiency evaluation of desulfurization and hydrogen production from coal liquefaction residue.

Discharge Characteristics of Coal and Extraction Residue from Direct Coal Liquefaction in Partial Fluidization Silo

An Investigation on Characteristics of Coal–water Slurry Prepared from the Solid Residue of Plasma Pyrolysis of Coal

The viscosity and crystallization behavior of slag from co-gasification of coal and extraction residue from direct coal liquefaction residue at high temperatures

Effects of Direct Coal Liquefaction Residue Additions on Low-Rank Pulverized Coal during Co-Pyrolysis

Process study and CO2 emission reduction analysis of coal liquefaction residue fluidized bed pyrolysis

Co-pyrolysis characteristics and synergistic mechanism of low-rank coal and direct liquefaction residue

Release characteristics of organic pollutants during co-firing coal liquefaction residue in a circulating fluidized bed boiler

Investigation on coal ash fusibility and fluidity during the co-gasification of coal and coal indirect liquefaction residue

Combustion Performance of the Blend of Lignite and Residues of Coal Liquefaction in Thermal-Banlance

Study on Pyrolysis Property of Shenhua Coal Liquefaction Residual

Properties of semi-coke from co-pyrolysis of lignite and direct liquefaction residue of Shendong coal

Study on solid-liquid transition behaviors of cohesive powders and predict the critical arch-breaking gas flow rate

Experimental Study on Electrochemical Desulfurization of Coal Liquefaction Residue

The resource utilization of coal gasification wastewater by co-slurry with lignite: Slurryability, dispersion/aggregation behavior, and co-slurrying mechanisms

Study on Sulfur Release in Combustion of Coal Liquefaction Residuals

Effect Of Equivalent Ratio (ER) On the Flow and Combustion Characteristics in A Typical Underground Coal Gasification (UCG) Cavity

Study on physicochemical properties, distribution modes, and formation mechanism of coal gasification fine slag in an industrial entrained-flow gasifier

Correlation study between microstructure and fluidity of molten slag during co-gasification of coal and indirect coal liquefaction residue: Molecular dynamics simulation

Direct Liquefaction Performance of Sub-Bituminous Coal from Hefeng by Solid Super Acids and Pyrolysis Kinetic Analysis of the Corresponding Residue

Effect of Extracted Compositions of Liquefaction Residue on the Structure and Properties of the Formed-coke

Flotation specificity of coal gasification fine slag based on release analysis