Abstract:Since the discovery of Ziegler-Natta catalyst, great breakthrough has been made in the design of catalyst in olefin polymerization field, but the development of catalyst is still the fresh source in this field. It will always be a frontier scientific problem in this field to influence the olefin polymerization process through the structural design of catalysts. Due to the low cost of nickel and its high abundance, nickel-based catalysts have shown great prospects in the application of olefin polymerization. In this work, three kinds of unsymmetrical a-diimine nickel catalysts with different steric effects were designed, and their catalytic performances in ethylene polymerization were explored. It is found that the variety of catalysts and the change of polymerization conditions have important effects on the catalytic activity of ethylene polymerization, the molecular weight, branching density, thermodynamic parameters and mechanical properties of the prepared polyethylene. Among them, the polyolefin prepared by Ni3 catalyst with large steric hindrance is ultra-high molecular weight polyethylene, and the above materials maintain excellent mechanical properties and elastic properties at the same time. Specifically, tert-butyl substituted ketoimine intermediate B was condensed with three different anilines to synthesize ligands L-1 similar to L-3 with different steric effects. The catalysts Ni-1 similar to Ni-3 were successfully synthesized by efficient coordination reaction between the obtained ligands and DMENiBr2, and the yields were over 90%. The single crystal structures of catalysts Ni-1 and Ni-3 were also prepared, and the steric hindrance around the nickel center was quantified utilizing the steric maps [Vbur(Ni1)=46.1%, Vbur(Ni-3)=48.7%]. Under 0.8 MPa pressure of ethylene and AlEt2Cl as cocatalyst, the ethylene polymerization performance was explored using three nickel catalysts at different temperatures. Among them, Ni2 exhibited the best catalytic activity in ethylene polymerization at 50. (up to 1.7x10(7) g center dot mol (-1)center dot h (-1)), generating polyethylene with higher branching density. The polyethylene prepared by Ni-3 with large steric hindrance is ultra-high molecular weight polyethylene with a molecular weight of 172x10(4) g center dot mol (-)1. Moreover, polyethylene materials prepared by Ni-3 also showed excellent mechanical properties (breaking stress, 6 similar to 8 MPa; elongation at break, similar to 600%) and elastic properties (strain recovery value up to 68%).

Cationic P,O-Coordinated Nickel(II) Catalysts for Carbonylative Polymerization of Ethylene: Unexpected Productivity via Subtle Electronic Variation

Studies on Alternating Copolymerization of Ethylene and Carbon Monoxide Using Nickel‐Based Catalyst: Cocatalyst and the Polarity of Solvent

Nickel(II) Α -Diimine Catalysts with Carboxyl Groups for Ethylene Oligomerization and Polymerization

Bulky O-Phenylene-bridged Bimetallic Α-Diimine Ni(II) and Pd(II) Catalysts in Ethylene (Co)polymerization

Ethylene Polymerization and Copolymerization Using Nickel 2-Iminopyridine-N-oxide Catalysts: Modulation of Polymer Molecular Weights and Molecular-Weight Distributions

Scalable Nickel Catalysts for Carbonylative Terpolymerization of Ethylene/α-Olefin with High Efficiency

Robust and Reactive Neutral Nickel Catalysts for Ethylene Polymerization and Copolymerization with a Challenging 1,1-Disubstituted Difunctional Polar Monomer

Carbonyl Functionalized Polyethylene Materials via Ni- and Pd-diphosphazane Monoxide Catalyzed Nonalternating Copolymerization

Mechanistic Insights into Cationic [P,o]-Pd-catalyzed Chain-Transfer Copolymerization of Ethylene with Carbon Monoxide

Favorable Propylene-Incorporated Terpolymerization of Ethylene with CO Mediated by Cationic [P,o]-Pd and Ni Complexes

Catalytic Synthesis of Polyolefin Elastomer Using Unsymmetrical a-Diimine Nickel Catalyst

Steric and Electronic Effects in Cationic Pyridine Carboxamidate Nickel Mediated Ethylene Polymerization and Copolymerization with Methyl 10-Undecenoate

Hydrogen-Bonding-Induced Heterogenization of Nickel and Palladium Catalysts for Copolymerization of Ethylene with Polar Monomers.

Amidine/Phosphine‐Oxide‐Based Nickel Catalysts for Ethylene Polymerization and Copolymerization

Direct Copolymerization of Ethylene with Protic Comonomers Enabled by Multinuclear Ni Catalysts

A general cocatalyst strategy for performance enhancement in nickel catalyzed ethylene (co)polymerization

The Synthesis of Asymmetrical Anilinotropone Nickel and Palladium Complexes for Olefin Polymerization

Synthesis of Thermoplastic Polyethylene Elastomers and Ethylene–methyl Acrylate Copolymers Using Methylene-Bridged Binuclear Bulky Dibenzhydryl Α-Diimine Ni(II) and Pd(II) Catalysts

Cationic Palladium Catalyzed Nonalternating Copolymerization of Ethylene with Carbon Monoxide: Microstructure Analysis and Computational Study

Ethylene/α-olefin homo- and copolymerization using a dinuclear catalyst of nickel

Unexpected Effect of Catalyst’s Structural Symmetry on the Branching Microstructure of Polyethylene in Late Transition Metal Polymerization Catalysis