Abstract:The stiffness of the train's rubber joint at the primary suspension system has a crucial influence on the operation stability and curve-passing performance. As traditional rubber joint only provides unadjustable parameters, they cannot meet the conflicting stiffness requirements when the train is running at high speed on straight track and passing through the curve track. To solve this problem, this paper proposed a new rubber joint with fail-safe characteristics based on magnetorheological elastomer (MRE). The joint stiffness is controlled by a hybrid magnetic field generated by permanent magnets and electromagnets. With this hybrid magnetic field, the initial stiffness of the MRE joint can be designed to be hard so as to suppress the hunting motions and vibrations of wheelsets and thus keep the trains' high-speed stability; furthermore, the stiffness can decrease by energizing the electromagnets when passing through a curve track. With this characteristic, the joint can guarantee the safety of the train at high operation speed even when the joint control system fails. The prototype of the MRE joint was fabricated and assembled. Stiffness controllability of the MRE joint was tested using a Material Testing Systems machine. The result reveals that the stiffness of this MRE joint can be controlled effectively. According to the testing results, a new phenomenological model was built to predict the joint's dynamic performance. Then this established model was integrated into dynamic models of trains to numerically evaluate the new joint's influence on the train's stability and trafficability. The evaluation result shows that the proposed MRE joint is fully effective on providing controllable stiffness to satisfy the conflicting stiffness requirement with fail-safe characteristics.

Development of a magnetorheological elastomer rubber joint with fail-safe characteristics for high-speed trains

Experimental study and modeling of rubber joints for railway vehicles using magnetorheological shear stiffening elastomers

Modeling and experimental evaluation of vibration reduction of hydraulic-driven joint with a MRF damper

Development of magnetorheological elastomer railway pads with a tunable stiffness/damping property for railway fastening systems

A Semi-Active Control Suspension System for Railway Vehicles with Magnetorheological Fluid Dampers

Dynamic Analysis of Support System of Permanent Magnet Traction Motors for High-Speed Trains

Investigating nonlinear dynamic properties of a swing arm rubber joint and their effects on the dynamic behavior of high-speed trains

Dynamic Damping Property of Magnetorheological Elastomer

A hybrid damping control strategy for high-speed trains running on existing tracks

Vibration control with an inner-pass magnetorheological damper

A new semi-active control strategy on lateral suspension systems of high-speed trains and its application in HIL test rig

A new magnetorheological elastomer torsional vibration absorber: structural design and performance test

Twin-tube- and Bypass-Containing Magneto-Rheological Damper for Use in Railway Vehicles

Analysis on new semi-active control strategies to reduce lateral vibrations of high-speed trains by simulation and hardware-in-the-loop testing

Hunting stability and dynamic stress analysis of a high-speed bogie using elastic-suspended motors as dynamic vibration absorber

Application and Dynamics of MR Damper in the Secondary Suspension System of High Speed Trains

Experimental and numerical investigations of the dynamic responses of low and medium speed maglev train-track-bridge coupled system

Modeling and Analysis of a Novel Levitation Magnet with Damping Coils for High-Speed Maglev Train

Simulation and experiment of the magnetorheological seat suspension with a seated occupant in both shock and vibration occasions

Fabrication and mechanical behaviors of iron–nickel foam reinforced magnetorheological elastomer

Numerical and experimental study on adaptive stiffness yaw damper for suppressing abnormal vibration of high-speed trains