Abstract:Electrochemical production of H2O2 from O-2 via the two-electron reduction reaction (2e-ORR) is a green and safe process that is being heavily investigated. Zeolitic imidazolate frameworks (ZIF) as a subclass of metal-organic frameworks (MOFs) have attracted enormous scientific interests due to their high porosity, excellent mechanical stability, tunable surface properties, and exceptional chemical and thermal stabilities. Herein, a series of pyrolyzed ZIF catalysts (p-ZIF) were synthesized by treating 2-methylimidazole zinc salt (ZIF-8) at high temperatures (900, 950 and 1000 degrees C). During pyrolysis, zinc was vaporized, leaving the metal-free nitrogen-doped porous graphitic carbon materials. The effects of the pyrolysis temperature on the structure and catalytic performance of the p-ZIF catalysts in 2e-ORR were systematically studied. In 2e-ORR in an acidic electrolyte, the p-ZIF catalysts displayed low overpotential, low Tafel slope, and negligible activity loss after 3000 cycles of accelerated durability testing (ADT). In particular, the p-ZIF-950 catalyst possessed the highest H2O2 partial current of 0.185 mA at 0 V vs. RHE, followed by the p-ZIF-900 (0.146 mA) and p-ZIF-1000 (0.135 mA) catalysts. The H2O2 selectivity over the p-ZIF-950 catalyst was also constantly higher than those over the other two p-ZIF catalysts across the potential range investigated and maximized at 89.2%. Highly efficient and durable H2O2 production was demonstrated on the p-ZIF-950 catalyst by the linear accumulation of H2O2 to 522 minol.g(cat)(-1) within 6 h, translating to an H2O2 production rate of 87 mmol.g(cat)(-1).h(-1). The morphology, composition, carbon defect, texture, and surface chemical state were characterized by techniques such as transmission electron microscopy (TEM), elemental analysis, Raman spectroscopy, N-2 physisorption, and X-ray photoelectron spectroscopy (XPS). The p-ZIF catalysts not only nicely carried over the regular rhombic dodecahedral morphology of ZIF-8, but also possessed abundant amount of nitrogen, high specific surface area, and hierarchical pore structure. According to the characterization results, the specific surface area and carbon defect are unlikely the key factors that determine the catalytic performance, while the evolutions of the average pore size and surface content of graphitic N mimicked those of the H2O2 partial current and selectivity on the p-ZIF catalysts. In light of the literature works, the large pore size is proposed to facilitate the in-diffusion of O-2 and out-diffusion of H2O2, while the graphitic N is able to enhance the activation of O-2 and desorption of H2O2, both of which are beneficial to the kinetics of the 2e-ORR reaction.

Tailoring Surface Carboxyl Groups of Mesoporous Carbon Boosts Electrochemical H2O2 Production.

Surface oxidation of commercial activated carbon with enriching carboxyl groups for high-yield electrocatalytic H2O2production

Unveiling Favorable Microenvironment on Porous Doped Carbon Nanosheets for Superior H2O2 Electrosynthesis in Neutral Media

Efficient Electrosynthesis of Hydrogen Peroxide Using Oxygen-Doped Porous Carbon Catalysts at Industrial Current Densities

Mechanism investigation of enhanced electrochemical H2O2 production performance on oxygen-rich hollow porous carbon spheres

Selective oxygen-doping in self-supportive carbon electrode by electrochemical oxidation for electrocatalytic synthesis of hydrogen peroxide

Oxygen Functional Groups Regulate Cobalt‐Porphyrin Molecular Electrocatalyst for Acidic H2O2 Electrosynthesis at Industrial‐Level Current

Dipole–Dipole Tuned Electronic Reconfiguration of Defective Carbon Sites for Efficient Oxygen Reduction into H 2 O 2

Tailoring Heteroatoms in Conjugated Microporous Polymers for Boosting Oxygen Electrochemical Reduction to Hydrogen Peroxide

Optimizing Heteroatom Doping for Efficient Hydrogen Peroxide Production via Oxygen Reduction

Efficient Electrochemical Production of H2O2 on Hollow N-Doped Carbon Nanospheres with Abundant Micropores

The Influence of Mesopore Size Distributions on the Electrochemical Activity and Two-Electron Selectivity of the Oxygen Reduction Reaction in Nitrogen-Doped and CoOx-loaded Activated Carbon

Electrosynthesis of H2O2 through a two-electron oxygen reduction reaction by carbon based catalysts: From mechanism, catalyst design to electrode fabrication

Effects of porous structure and oxygen functionalities on electrochemical synthesis of hydrogen peroxide on ordered mesoporous carbon

SOx-modified Porous Carbon As a Highly Active Electrocatalyst for Efficient H2O2 Generation

Dipole-Dipole Tuned Electronic Reconfiguration of Defective Carbon Sites for Efficient Oxygen Reduction into H2O2

Tandem Oxidation Activation of Carbon for Enhanced Electrochemical Synthesis of H2O2: Unveiling the Role of Quinone Groups and Their Operando Derivatives

Pyrolysis-Free Mechanochemical Conversion of Small Organic Molecules into Metal-Free Heteroatom-Doped Mesoporous Carbons for Efficient Electrosynthesis of Hydrogen Peroxide

Ultra‐Rapid Electrocatalytic H2O2 Fabrication over Mono‐Species and High‐Density Polypyrrolic‐N Sites

Fabrication of superhydrophilic porous carbon materials through a porogen-free method: Surface and structure modification promoting the two-electron oxygen reduction activity

Nitrogen-doped Carbon Pyrolyzed from ZIF-8 for Electrocatalytic Oxygen Reduction to Hydrogen Peroxide