Abstract:Blending diesel and gasoline is a promising way to stabilize combustion process and reduce emissions of NOx and soot in the Homogeneous Charge Compression Ignition (HCCI) engine. In order to computationally study diesel/gasoline blends for their autoignition characteristics, a five-component diesel surrogate (21.6% n-hexadecane, 15.5% n-octadecane, 26.0% isocetane, 20.7% 1-methylnaphthalene, 16.2% decalin, by mol.) and a five-component gasoline surrogate (11.0% n-heptane, 30.8% isooctane, 38.2% toluene, 10.3% diisobutylene, 9.7% cyclohexane, by mol.) are blended in three volume ratios of 30%/70%, 50%/50%, and 70%/30% (denoted as SD30, SD50, and SD70) to compare measured ignition delay with published data of diesel/gasoline blends. A heated shock tube and a heated rapid compression machine (RCM) are used to measure the ignition delay of three surrogate blends under compressed pressures of 6, 10, and 20 bar for fuel-lean (phi = 0.5), fuel-rich (phi = 1.5), and stoichiometric mixtures. Experimental results indicate that surrogate blends match well with fuel-lean and stoichiometric diesel/gasoline/air mixtures while get longer ignition delays for the fuel-rich case, which is thought of as the consequence of fitting the surrogate to fuel-lean conditions in the engine. The kinetic simulation for ignition delays is performed with a comprehensive mechanism. Due to the mechanism overpredicting ignition delays in the intermediate-to-high temperature region, proper refinement is done to the original mechanism based on sensitivity analyses at 1000 and 660 K. A further comparison of ignition delay predictive ability for two mechanisms is conducted subsequently. The modified mechanism not only simulates ignition delays in the intermediate-to-high temperature region successfully but also maintains the good performance of the original mechanism in the negative-temperature-coefficient (NTC) and low-temperature region. Besides, species and temperature profiles after the compression stroke in RCM are simulated using the modified mechanism for three surrogate blends at equal equivalence ratio, compressed pressure, and compressed temperature. Sensitivity analysis is also conducted to identify reactions dominating the system reactivity. (C) 2019 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Experimental and Modeling Study of the Autoignition Characteristics of Gasoline/hydrogenated Catalytic Biodiesel Blends over Low-to-intermediate Temperature

Experimental Study the Effect of Injection Strategies on Combustion and Emission Characteristics in Gasoline Compression Ignition Engines Using Gasoline/hydrogenated Catalytic Biodiesel Blends

Experimental and Kinetic Study of Diesel/gasoline Surrogate Blends over Wide Temperature and Pressure

Combustion and Emission Characteristics of Gasoline/hydrogenated Catalytic Biodiesel Blends in Gasoline Compression Ignition Engines under Different Loads of Double Injection Strategies

An Experimental and Modeling Study of Autoignition Characteristics of Two Real Low-Octane Gasoline Fuels in a Heated Rapid Compression Machine at Elevated Pressures

Numerical study of ignition process of ternary hydrogenated catalytic biodiesel/methanol/n-octanol blends under high-temperature and high-pressure conditions

Numerical study of spray combustion and soot emission of gasoline–biodiesel fuel under gasoline compression ignition-relevant conditions

Effects of injection strategies coupled with gasoline-hydrogenated catalytic biodiesel blends on combustion and emission characteristics in GCI engine under low loads

Experimental and Modeling Study on Autoignition of a Biodiesel/n-Heptane Mixture and Related Surrogate in a Heated Rapid Compression Machine

Gas-phase Autoignition of Diesel/gasoline Blends over Wide Temperature and Pressure in Heated Shock Tube and Rapid Compression Machine

A Visual Study on of HCB/Gasoline Dual-Fuel Combustion Strategy and Premix Ratio in a Diesel Engine

An Experimental and Modeling Study of Autoignition Characteristics of Butanol/diesel Blends over Wide Temperature Ranges

Experimental and Modeling Study on Ignition Delay Times of Dimethyl Ether/n-Butane Blends at a Pressure of 2.0 MPa

An Investigation on Gasoline Compression Ignition (GCI) Combustion in a Heavy-Duty Diesel Engine Using Gasoline/hydrogenated Catalytic Biodiesel Blends

Experimental and modeling study on auto-ignition characteristics of methane/hydrogen blends under engine relevant pressure

Combustion Reaction Kinetics of Biodiesel/n-Butanol Blends: Experiments in an Ultrahigh-Pressure Rapid Compression Machine

Experimental Research on HCCI Using Gasoline and Diesel Blended Fuels

Interpreting the Effect of Hydrogen Addition on the Auto-Ignition of Branched Alkane: A Case Study of Iso-Butane/hydrogen/o2/ar Mixtures

Experimental and Modeling Study of the Autoignition for Diesel and N-Alcohol Blends from Ethanol to N-Pentanol in Shock Tube and Rapid Compression Machine

Study on the Effect of Hydrogen Addition to Dimethyl Ether Homogeneous Charge Compression Ignition Combustion Engine

Experimental and Modeling Study on Ignition Delay Times of Dimethoxy Methane/n-Heptane Blends