Transfer Function Models for Instantaneous Internal Cooling Loads to Describe Time Lag Effect of Conversion Process

Ruonan Li,Jili Zhang

DOI: https://doi.org/10.1016/j.buildenv.2022.109054

IF: 7.093

2022-01-01

Building and Environment

Abstract:For the better operation of air-conditioning systems and the improvement of office building thermal environment, internal heat loads resulting from occupants, equipment, and lightings need to be accurately quantified because they are main components of space cooling loads. However, existing methods are hard to describe the complicated variation characteristics of internal cooling loads and time lag effect of conversion processes between electric energy and internal cooling loads, leading to limited application and unstable accuracy. To tackle this problem, in this study, transfer function models for instantaneous internal cooling loads were firstly established. Second, an experiment was conducted based on a chamber with good insulation. Third, experimental data and radiant time factors were employed in model discretization, parameter identification, and order decrease steps to acquire unknown parameters and develop models as second-order and third-order discrete transfer functions. Fourth, a simulation was conducted to validate the models, and a mean absolute percentage error of 8.08% was attained. Finally, a comparison between proposed and previously developed methods was carried out to evaluate model performance. The proposed models achieved a maximum internal cooling loads reduction of 75.57%, and the maximum time lag resulting from the heat storage characteristics of indoor thermal masses was approximately 30 min. With two easily accessible input parameters, the proposed models exhibited promising applicability and feasibility during the real-time operation of buildings. This paper provides a theoretical basis for accurately obtaining instantaneous internal cooling loads and thus is meaningful in improving building thermal environment and enhancing comfort levels.