Abstract:The work here presents a thorough evaluation of the effect of Mn-Na-W/SiO2 catalyst surface parameters on its performance in the oxidative coupling of methane (OCM). To do so, we used microporous dealuminated β-zeolite (Zeo), or mesoporous SBA-15 (SBA), or macroporous fumed silica (Fum) as precursors for catalyst preparation, together with Mn nitrate, Mn acetate and Na2WO4. Characterizing the catalysts by inductively coupled plasma-optical emission spectroscopy, N2 physisorption, X-ray diffraction, high-resolution scanning electron microscopy-energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, and catalytic testing enabled us to identify critical surface parameters that govern the activity and C2 selectivity of the Mn-Na-W/SiO2 catalyst. Although the current paradigm views the phase transition of silica to α-cristobalite as the critical step in obtaining dispersed and stable metal sites, we show that the choice of precursors is equally or even more important with respect to tailoring the right surface properties. Specifically, the SBA-based catalyst, characterized by relatively closed surface porosity, demonstrated low activity and low C2 selectivity. By contrast, for the same composition, the Zeo-based catalyst showed an open surface pore structure, which translated up to fourfold higher activity and enhanced selectivity. By varying the overall composition of the Zeo catalysts, we show that reducing the overall W concentration reduces the size of the Na2WO4 species and increases the catalytic activity linearly as much as fivefold higher than the SBA catalyst. This linear dependence correlates well to the number of interfaces between the Na2WO4 and Mn2O3 species. Our results combined with prior studies lead us to single out the interface between Na2WO4 and Mn2O3 as the most probable active site for OCM using this catalyst. Synergistic interactions between the various precursors used and the phase transition are discussed in detail, and the conclusions are correlated to surface properties and catalysis.

Catalytic Properties of SmMnO3/cordierite Monolithic Catalysts: Acid Treatment and Calcination Process Optimization Using Response Surface Methodology

In Situ Fabrication of Highly Active Γ-Mno2/smmno3 Catalyst for Deep Catalytic Oxidation of Gaseous Benzene, Ethylbenzene, Toluene, and O-Xylene.

Effect of Acid Treatment on the Catalytic Activity and Mechanical Stability of SmMnO3/Cordierite Monolithic Catalysts

Effect of Drying and Calcination on the Toluene Combustion Activity of A Monolithic Cumnag/Gamma-Al2o3/Cordierite Catalyst

Surface Tailoring on Srmno3@Smmn2o5 for Boosting the Performance in Diesel Oxidation Catalyst

Effect of Calcination Temperature on Structural Properties and Catalytic Soot Combustion Activity of MnOx/wire-mesh Monoliths

Enhancing Soot Catalytic Combustion Performance of SmMn2O5 Via Surface Etching

Surface Modification of Cobalt‐Manganese Mixed Oxide and Its Application for Low‐Temperature Propane Catalytic Combustion

Enhancement of the redox reactions of the La0.8Sr0.2MnO3 catalyst by surface acid etching: A simple synthesis strategy to high-performance catalysts for methane combustion

Effect of Calcination Conditions on MnOx/Al2O3 Catalytic Efficiency for NO Oxidation

Surface Reconstruction of a Mullite-Type Catalyst via Selective Dissolution for NO Oxidation

Optimizing Conditions for Preparation of MnOx/RHA Catalyst Particle for the Catalytic Oxidation of NO

Optimization of catalytic activity of MnCoOx catalyst for NH3–SCR at low temperature by response surface method

High-temperature Calcination Enhances the Activity of MnOx Catalysts for Soot Oxidation

The effect of acid/alkali treatment on the catalytic combustion activity of manganese oxide octahedral molecular sieves

Optimization of the Catalytic Activity of a ZnCo2O4 Catalyst in Peroxymonosulfate Activation for Bisphenol A Removal Using Response Surface Methodology

Lattice Distortion in Mn3o4/Smox Nanocomposite Catalyst for Enhanced Carbon Monoxide Oxidation

Performance of an Aliovalent-Doping MnCeO X /cordierite Monolithic Catalyst Derived from MOFs for O -Xylene Oxidation

Ceramic Monolith Supported Mn–Ce–M Ternary Mixed-Oxide (m=cu, Ni or Co) Catalyst for VOCs Catalytic Oxidation

Critical Surface Parameters for the Oxidative Coupling of Methane over the Mn-Na-W/SiO2 Catalyst

Combined Experimental and Theoretical Study of O-Xylene Elimination on Fe–Mn Oxides Catalysts